Council archive · source document
35484 Approved Plans Ba · MCU21/0222.01
Plans and drawings: the text below has words only, no drawings.
Very large file (18.3 MB): may take a few minutes to open.
Original PDF page 1, section 1. The text section number identifies this passage in the reader.
SUBJECT SITE
7/56 DAVID LOW WAY
SUNRISE BEACH 4567
Sheet List
GENERAL NOTES: WALL FRAMING NOTES: ROOF FRAMING NOTES: CONCRETE SETOUT NOTES: NOMINAL MINIMUM FIXINGS: Sheet DRAWN
THE BUILDER IS RESPONSIBLE TO CHECK ALL EXISTING ALL TIMBER FRAMING IN ACCORDANCE WITH AS1684. INSTALL SARKING OVER BATTENS UNDER ROOF SHEETING GROUND BENEATH SUBFLOOR IS TO BE GRADED PRIOR TO CONCRETE FOOTINGS TO COMPLY WITH AS3600 & HAVE 20MPa UNLESS SPECIFIED OTHERWISE, USE NOMINAL FIXINGS: Number SHEET NAME BY ISSUE
SERVICES PRIOR TO BEGINNING CONSTRUCTION SANITARY FOR IMPROVED MOISTURE DRAINAGE WITH AIRCELL CONSTRUCTION SUCH THAT THE FGL BELOW THE BUILDING IS (N20) WITH REINFORCEMENT AS DETAILED & BE MECHANICALLY (AS1684.3, S9.5 & T9.4)
COMPARTMENTS THAT ARE COMPLETELY ENCLOSED MUST IT IS RECOMMENDED THAT TIMBERS USED IN THIS PROJECT BE GLARESHIELD INSTALLED BELOW SARKING WITH 40mm AIR HIGHER THAN ADJACENT FGL SO PONDING DOES NOT OCCUR VIBRATED * 3.05Ømm MIN FOR HARDWOOD & CYPRESS FRAMING SP1.0 SITE PLAN C.CLOUT PRELIMINARY WORKING DRAWINGS
HAVE A DOOR THAT IS READILY REMOVABLE FROM THE SOURCED FROM RESPONSIBLY MANAGED FORESTS, TREE GAP FOR OPTIMUM THERMAL RESISTANCE. FOR FURTHER BELOW THE BUILDING TO NCC VOL 2 P3.1.2.3(c) * 3.33Ømm MIN FOR SOFTWOOD FRAMING
OUTSIDE BUT THIS IS NOT REQUIRED WHEN THERE IS 1200mm PLANTATIONS OR RECYCLED WOOD THROUGH COMPANIES INSULATION INSTALLATION DETAILS REFER TO ENERGY BUILDER TO COMPLY WITH AS3600 & AS2870 FOR CONCRETE VAPOUR BARRIER IS TO BE INSTALLED UNDER THE SLAB ON * PLASTIC POLYMER (GLUE) COATED 0R ANNULAR OR HELICAL SP1.1 SITE CONTEXT C.CLOUT PRELIMINARY WORKING DRAWINGS
MIN BETWEEN THE DOORWAY & THE WC PAN (NCC VOL2 THAT HAVE BEEN CERTIFIED AS COMPLYING WITH FOREST EFFICIENCY DRAWINGS. BUILDER TO REFER TO TRUSSED SLAB CONSTRUCTION GROUND CONSTRUCTION. IT IS TO BE 0.2mm NOMINAL DEFORMED SHANK NAILS MACHINE DRIVEN NAILS:USE HOT
P3.8.3.3) STEWARDSHIP COUNCIL (FSC) STANDARDS. FOR FURTHER ROOF BRACING NOMINATED BY THE TRUSS MANUFACTURER THICKNESS POLYETHYLENE FILM MEDIUM IMPACT RESISTANT DIPPED GALVANISED, STAINLESS STEEL OR MONEL METAL W0.0 COVER C.CLOUT PRELIMINARY WORKING DRAWINGS
INFORMATION PLEASE REFER TO www.fsc.org (or) THE DRAINAGE AND FLOOR HEIGHT ABOVE THE FINISHED (AS2870, S5.3.3.2(c)) FOOTINGS & SLABS ON GROUND REQUIRE NAILS IN DAMP OR WEATHER EXPOSED JOINTS
SITE DRAINAGE IS TO BE CONSTRUCTED ACCORDING TO www.fscaustralia.org ROOF TRUSSES TO BE DESIGNED & INSTALLED IN GROUND LEVEL SHOULD BE DESIGNED AND CONSTRUCTED TO MINIMUM CONCRETE COVER TO THE OUTER EDGE OF * WHEN NOT SPECIFIED IN FOLLOWING TABLE, NAIL LENGTH IS W1.0 LOWER FLOOR PLAN C.CLOUT PRELIMINARY WORKING DRAWINGS
AS/NZS3500.3 STORMWATER DRAINAGE OR AS/NZS3500.5 STRESS GRADE JOINT GROUP GENERAL MGP 10/F5 JD5 (PINE ACCORDANCE WITH AS4440:2004 INSTALLATION OF AVOID PONDING AGAINST OR NEAR THE CONCRETE FOOTING REINFORCEMENT: TO BE 10 x NAILØ WHEN DRIVEN INTO SIDE GRAIN
DOMESTIC INSTALLATIONS S5 (NCC VOL2 P3.1.2.0) WITH PITH-IN) MGP 12/F8 JD4 (PINE NO PITH-IN) SPECIFIED NAILPLATED TIMBER ROOF TRUSSES WITH THE GROUND AROUND THE BUILDING PERIMETER, * 40mm TO UNPROTECTED GROUND * WHEN NOT SPECIFIED IN TABLE NEXT, NAIL LENGTH IS TO BE W1.1 GROUND FLOOR PLAN C.CLOUT PRELIMINARY WORKING DRAWINGS
MGP 15/F11 JD4 (PINE NO PITH-IN) FOR ENGINEERED ITEMS INCLUDING THE UPHILL SIDE OF CUT AND FILL SITES MUST BE * 30mm TO A MEMBRANE IN CONTACT WITH THE GROUND 15 x NAILØ WHEN DRIVEN INTO END GRAIN
WORKERS ARE TO DETERMINE SAFE MANUAL & MECHANICAL LGL ENGINEERED WOOD PRODUCTS ARE DESIGNED WITH STRESS GRADE JOINT GROUP GENERAL MGP 10/F5 JD5 (PINE SLOPED AWAY FROM THE BUILDING AT 50mm MINIMUM IN * 20mm TO AN INTERNAL SURFACE * MINIMUM 2 NAILS PER JOINT UNO W1.2 UPPER FLOOR PLAN C.CLOUT PRELIMINARY WORKING DRAWINGS
HANDLING , LIFTING & INSTALLATION OF ARCHITECTURAL CAMBER & THE BUILDER IS TO ENSURE BEAMS ARE INSTALLED WITH PITH-IN) MGP 12/F8 JD4 (PINE NO PITH-IN) MGP 15/F11 1000mm (AS1870 S5.2.1) * 40mm TO AN EXTERNAL SURFACE (NCC VOL 2 P3.2.3.3) HAND DRIVEN NAILS:
FIXTURES & COMPONENTS WHILE FOLLOWING WHS RIGHT WAY UP. CURVED MEMBERS ARE TO BE INSTALLED JD4 (PINE NO PITH-IN) FOR ENGINEERED ITEMS LGL * 3.15Ømm MIN FOR HARDWOOD & CYPRESS W1.3 ROOF PLAN C.CLOUT PRELIMINARY WORKING DRAWINGS
INSTRUCTIONS ON MANUFACTURER'S DOCUMENTATION ACCORDING TO THE DESIGN DRAWINGS ENGINEERED WOOD PRODUCTS ARE DESIGNED WITH TERMITE RISK MANAGEMENT IS TO BE INSTALLED TO ENSURE * 3.75Ømm MIN FOR SOFTWOOD & LOWER DENSITY TIMBERS
BUILDING WHS REPORT TO BE STORED IN LINEN CP FOR EASY THE BUILDER SHOULD PROVIDE TEMPORARY BRACING TO CAMBER & THE BUILDER IS TO ENSURE BEAMS ARE INSTALLED CLASS 1 & 10 BUILDINGS TO HAVE 50 YEAR DESIGN LIFE BY WATERPROOFING & WATER RESISTANT MATERIALS NOTES: W2.0 ELEVATIONS C.CLOUT PRELIMINARY WORKING DRAWINGS
ACCESS SUPPORT WIND & CONSTRUCTION LOADS DURING RIGHT WAY UP & TO MANUFACTURER'S SPECIFICATIONS KEEP COMPLIANCE WITH AS3660.1 TERMITE MANAGEMENT - NEW
CONSTRUCTION. THIS MAY BE PART OF THE PERMANENT UNSEASONED TIMBER MEMBERS SEPARATED FROM WORK (NCC VOL2 P3.1.3.0) METHOD OF TERMITE RISK ALL WET AREAS WATERPROOFING IS TO COMPLY WITH
HANDRAIL & BALUSTRADE NOTES
W2.1 ELEVATIONS C.CLOUT PRELIMINARY WORKING DRAWINGS
BRACING & MUST BE EQUAL TO 60% MINIMUM OF PROPOSED SEASONED TIMBER MEMBERS TO PREVENT DIFFERENCES IN MANAGEMENT IS TO BE PROVIDEDWITH AT LEAST 2 DURABLE AS3740:2010 WATERPROOFING OF WET AREAS WITHIN
TIMBER FLOOR
PERMANENT BRACING (AS1684.3, S8.2) SHRINKAGE & TOLERANCES (AS1684.3 S1.13) PERMANENT NOTICES IN KITCHEN CUPBOARD & MSB (NCC RESIDENTIAL BUILDINGS (BCA VOL2 P3.8.1.0)
HANDRAILS, BALUSTRADES & ALL STAIR MEMBERS &
W3.0 SECTIONS C.CLOUT PRELIMINARY WORKING DRAWINGS
VOL2, P3.1.3.2)
CONNECTIONS TO MEET AS1170.1
TIMBER FLOORS TO MEET THE REQUIREMENTS OF
RECOMMENDED 12% AVERAGE MOISTURE CONTENT OF RECOMMENDED 12% AVERAGE MOISTURE CONTENT OF ALL WATERPROOFING MATERIALS & SYSTEM COMPONENTS W3.1 SECTIONS C.CLOUT PRELIMINARY WORKING DRAWINGS
TIMBER MEMBERS AT INSTALLATION (AS1884.3, T.E1) BUILDER TIMBER MEMBERS AT INSTALLATION (AS1884.3, T.E1) LGL VISUAL INSPECTION CLEARANCES FOR TERMITE ARE TO BE INSTALLED ACCORDING TO MANUFACTURER'S
AS4786.2:2005 TIMBER FLOORING - SANDING & FINISHING
IS TO COMPLY WITH GECA32-2007 RECYCLED & RECLAIMED ROOF TRUSSES ENGINEERED TO AS1720.1 (AS1684.3 S1.12) MANAGEMENT ARE TO BE APPLIED TO THE BUILDING FABRIC INSTALLATION INSTRUCTIONS & MATERIAL COMPATIBILITY IS W3.2 SECTIONS C.CLOUT PRELIMINARY WORKING DRAWINGS
DAMP PROOF COURSES & FLASHINGS ARE TO COMPLY WITH TIMBER STANDARD &/ INTERIM INDUSTRY STANDARD TO BE CHECKED BY THE BUILDER PRIOR TO USE.
AS/NZS2905:1995 RECYCLED TIMBER VISUALLY STRESS GRADED RECYCLED INSTALL SARKING OVER BATTENS UNDER ROOF SHEETING WHERE THE SLAB EDGE HAS <75mm ESPOSURE, A SUITABLE W3.3 SECTIONS C.CLOUT PRELIMINARY WORKING DRAWINGS
TIMBER FOR STRUCTURAL PURPOSES TO ENSURE ANY FOR IMPROVED MOISTURE DRAINAGE WITH AIRCELL TERMITE PERIMETER BARRIER SHOULD BE INSTALLED WATERPROOFING SYSTEM IS TO ALLOW FOR CREEP,
AS4662 CERAMIC TILES - DEFINITIONS, CLASSIFICATION,
RECYCLED TIMBER IS FIT FOR PURPOSE GLARESHIELD INSTALLED BELOW SARKING WITH 40mm AIR
GAP FOR OPTIMUM THERMAL RESISTANCE. FOR FURTHER
(AS3660.1:2000, S.4.4) EXPANSION & CONTRACTION OF SUBSTRATE (AS3470:2010 W4.0 WINDOWS & DOORS C.CLOUT PRELIMINARY WORKING DRAWINGS
CHARACTERISTICS & MARKING REQUIRE CERAMIC TILES OF THE S2.3)
BEST COMMERCIAL QUALITY (FIRST QUALITY), CERAMIC FLOOR
INSULATION INSTALLATION DETAILS REFER TO ENERGY
EFFICIENCY DRAWINGS.
THE BUILDER IS RESPONSIBLE TO CHECK ALL EXISTING
SERVICES PRIOR TO BEGINNING CONSTRUCTION CONCRETE
W5.0 POOL DETAILS C.CLOUT PRELIMINARY WORKING DRAWINGS
TILES SHALL BE TESTED TO AS/NZS4586 TO MEET AUSTRALIAN
STANDARDS FOR THE FIRST QUALITY CERAMIC TILES
BUILDER TO REFER TO TRUSSED ROOF BRACING NOMINATED
BY THE TRUSS MANUFACTURER. ROOF TRUSSES TO BE
IS TO COMPLY WITH AS3600 & HAVE A 25MPa (N25 GRADE)
STRENGTH AT 28 DAYS, 20mm NOMINAL AGGREGATE SIZE &
W5.1 POOL DETAILS C.CLOUT PRELIMINARY WORKING DRAWINGS
PROVIDE INSECT SCREENS TO ALL WINDOWS BUT NOT DESIGNED & INSTALLED IN ACCORDANCE WITH AS4440:2004
INSTALLATION OFNAILPLATED TIMBER ROOF TRUSSES
100mm SLUMP (UNO) & SL72 MESH & BE MECHANICALLY
VIBRATED
W6.0 DETAILS C.CLOUT PRELIMINARY WORKING DRAWINGS
EXTERNAL DOORS
W7.0 LOWER LIGHTING PLAN C.CLOUT PRELIMINARY WORKING DRAWINGS
TOTAL INTERNAL FLOOR AREA INCLUDES ALL INTERNAL &
EXTERNAL WALLS
APPROVED WITH CONDITIONS W7.1 GROUND LIGHTING PLAN C.CLOUT PRELIMINARY WORKING DRAWINGS
This is an Approved Building Works Document. Refer
W7.2 UPPER LIGHTING PLAN C.CLOUT PRELIMINARY WORKING DRAWINGS
to the Decision Notice for conditions of approval
W8.0 LOWER POWER PLAN C.CLOUT PRELIMINARY WORKING DRAWINGS
PERMIT No. 35484
W8.1 GROUND POWER PLAN C.CLOUT PRELIMINARY WORKING DRAWINGS
DATE 09/11/2023 W8.2 UPPER POWER PLAN C.CLOUT PRELIMINARY WORKING DRAWINGS
ISSUED BY COASTAL BUILDING W9.0 CEILING PLANS C.CLOUT PRELIMINARY WORKING DRAWINGS
CERTIFICATIONS PTY LTD
W10.0 LOWER SETOUT PLAN C.CLOUT PRELIMINARY WORKING DRAWINGS
W10.1 GROUND SETOUT PLAN C.CLOUT PRELIMINARY WORKING DRAWINGS
W10.2 UPPER SETOUT PLAN C.CLOUT PRELIMINARY WORKING DRAWINGS
CLIENT: Maxine Horne PROJECT: BEACHES
www.chriscloutdesign.com.au GENERAL NOTES:
Use written dimensions only. DO NOT scale drawings. Contractors SITE ADDRESS: BEACHES NOOSA 7/56 David Low Way, SUNRISE BEACH QLD 4567
A: OFFICE 1/20 DUKE STREET, to verify all dimensions on site prior to commencing works. Site
SUNSHINE BEACH, QLD 4567, location in accordance with engineers details. These drawings are to DRAWING TITLE: SITE CONTEXT
be read in conjunction with engineers design and details, the
E: [email protected] DATE: 31-08-23 SCALE: As indicated @ A2 DRAWN BY: C.CLOUT
P: (07) 54748 107 BSA LICENCE: 1127508
accompanying building specification and schedule of finishes. If in
doubt, please request clarification. DO NOT ASSUME. ISSUE: PRELIMINARY WORKING DRAWINGS
SP1.1
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalFull text of sections 2 to 8 (of 105)
Section 2
KEY: AREAS:
AW - AWNING WINDOW CO - COFFEE MACHINE N - NICHE SLD - SLIDING DOOR LOWER FLOOR: 229.7m² APPROVED WITH CONDITIONS
B - BATH FD - FRENCH DOORS OV - OVEN SLW - SLIDING WINDOW GROUND FLOOR: 235m² This is an Approved Building Works Document. Refer
BFD - BI-FOLD DOOR FR - FRIDGE P - PANTRY T - TUB UPPER FLOOR: 141.7m²
to the Decision Notice for conditions of approval
BFW - BI-FOLD WINDOW FP - FIXED PANEL WINDOW SH - SHOWER V - VANITY BASIN GFA= 606.4m² PERMIT No. 35484
CT - COOK TOP L - LOUVER WINDOW S - SINK WC - WATER CLOSET SITE = 331.3/ 774.63 DATE 09/11/2023
ISSUED BY COASTAL BUILDING
CERTIFICATIONS PTY LTD
97°21'20"
33.993
RL20000 RL20000 RL19500 RL19000 RL18500 RL18000 RL17500 RL17000 RL16500
3000
UNDERGROUND
SERVICES 4087
VOID
3000 10000
COASTAL SETBA
CK
DAVID LOW WAY
SKYLIGHT
182°26'
21.285
LINE OF SEW ER
191°14'10"
25.0
SKYLIGHT
DRIVEWAY CROSSOVER &
DESIGN
TO BE IN ACCORDANCE
WITH
DRAWINGS RS-049 & RS-050
2740
3000
30"
267°35'
1.0 2°26'
0.95
277°16'30"
7.283
7°16'30"
3000
3.0
3000
277°16'30"
22.12
BEACHES NOOSA
NORTH 7/56 DAVID LOW WAY, SUNRISE
BEACH QLD 4567
AREA: 774.63m²
CLIENT: Maxine Horne PROJECT: BEACHES
www.chriscloutdesign.com.au GENERAL NOTES:
Use written dimensions only. DO NOT scale drawings. Contractors SITE ADDRESS: BEACHES NOOSA 7/56 David Low Way, SUNRISE BEACH QLD 4567
A: OFFICE 1/20 DUKE STREET, to verify all dimensions on site prior to commencing works. Site
SUNSHINE BEACH, QLD 4567, location in accordance with engineers details. These drawings are to DRAWING TITLE: SITE PLAN
be read in conjunction with engineers design and details, the
E: [email protected] DATE: 31-08-23 SCALE: 1 : 100 @ A2 DRAWN BY: C.CLOUT
P: (07) 54748 107 BSA LICENCE: 1127508
accompanying building specification and schedule of finishes. If in
doubt, please request clarification. DO NOT ASSUME. ISSUE: PRELIMINARY WORKING DRAWINGS
SP1.0
Section 3
KEY: AREAS:
AW - AWNING WINDOW CO - COFFEE MACHINE N - NICHE SLD - SLIDING DOOR LOWER FLOOR: 229.7m² APPROVED WITH CONDITIONS
B - BATH FD - FRENCH DOORS OV - OVEN SLW - SLIDING WINDOW GROUND FLOOR: 235m² This is an Approved Building Works Document. Refer
BFD - BI-FOLD DOOR FR - FRIDGE P - PANTRY T - TUB UPPER FLOOR: 141.7m² A B C D to the Decision Notice for conditions of approval
BFW - BI-FOLD WINDOW FP - FIXED PANEL WINDOW SH - SHOWER V - VANITY BASIN GFA= 606.4m² PERMIT No. 35484
CT - COOK TOP L - LOUVER WINDOW S - SINK WC - WATER CLOSET SITE = 331.3/ 774.63 DATE 09/11/2023
5 6 7 ISSUED BY COASTAL BUILDING
W3.2 W3.2 W3.3 CERTIFICATIONS PTY LTD
97°21'20"
33.993
3000
ENSURE FINISHED GROUND LINE
IS BELOW WINDOW SILL
UNDERGROUND
SERVICES
4 4
FALL
W1 W2 W3 W4
SH LINES OF SH
CURTAIN/BLIND
3000 RECESS
10000
SEE JOINERY DRAWINGS FOR
ALL CABINETRY ITEMS COASTAL SETBA
WC 820CSD CK
4 ENS 4
COMMS TILES
W3.1 TILES PDR W3.1
TILES 820CSD
GUEST STUDY
CARPET WC CARPET D2
.
V PD
2/720D PD
SD
SECRET
DOOR ROBE SD
PROVIDE 150mm SLAB
SETDOWN FOR LIFT WELL (TED)
3 LIFT CARRIAGE TO
MANUFACTURERS SPEC
LIFT
1.5x1.5
SJD
820D
ROBE
2/600D
ROBE 720D
SLD
3
LIFT SHAFT CONCRETE BLOCK WALLS SJD TV
TO ENGINEER'S DESIGN AND DETAIL
(TED) REFER TO SCHEDULES FOR FINISH
RL 16450
mm
FALL
1
745
2 VO FEATURE TREE T.O.W RL 17050
3 UP ID
4 A BO
VE THRESHOLD DRAINAGE TO
DAVID LOW WAY
RL 17195 FAMILY HYDRAULIC ENGINEERS
PLANTER DESIGN AND DETAIL
STAIRS ENSURE SUFFICIENT DRAINAGE LAWN
5 SEE JOINERY 20 SMOKE ALARMS IN
DRAWINGS ACCORDANCE WITH BCA AND
6
VO 19
SD AUSTRALIAN STANDARDS
ID RL 16450
7 AB 18
182°26'
3 OV 3
21.285
E REFER TO SCHEDULES
LINE OF SEW ER
8 17
RC COLUMN TO ENGINEERS FOR ALL INTERNAL RC COLUMN TO ENGINEERS DESIGN
W3.1 9 16
FINISHES
W3.1
10 15 DESIGN AND DETAIL. RENDER AND DETAIL. RENDER AND PAINT FINISH
11
12 13
14 AND PAINT FINISH OVER - REFER OVER - REFER TO EXTERNAL COLOURS
RL 17195
191°14'10"
TO EXTERNAL COLOURS
2 2
25.0
GLASS WALL 920GD GATE
D3
.
2 GLASS POOL FENCE AND GATE. ENSURE 2
FINISHED POOL FENCE HEIGHT IS MIN. ALL WORKS WITHIN COASTAL SETBACK TO
W3.0 1200mm ABOVE FINISHED FLOOR LEVEL W3.0
RETAINING WALLS TO ENGINEERS SD BE IN ACCORDANCE WITH OPERATIONAL
DESIGN AND DETAIL (TED) WORKS DOCS PROVIDED BY SCG
GAMES
GLASS WALL
GLASS WALL
CONSULTING ENGINEERS AND
TILES
POOL GATE TO SPA
FALL
DEVELOPMENT APPROVAL CONDITIONS
RL 16450
OPEN OUTWARDS
LINES OF CURTAIN/BLIND RECESS
0.5
ENSURE WATERPROOFING TO WALLS IN
ACCORDANCE WITH MANUFACTURERS 0.9
STANDARDS AND COMPLY WITH ASA AND BSA GYM
TILES T.O.W RL 17050
SEE JOINERY DRAWINGS FOR
ALL CABINETRY ITEMS
190mm
ICE
BATH
RL 16640
S S
SAUNA DRAINAGE
CHANGE SAUNA TO HYDRAULIC BAR
ENGINEERS SPEC TILES
FULL FLOOR TO ROOM TIMBER
1 CEILING MIRROR 1
1000GD 1000GD
GLASS WALL
W3.0 2935 W3.0
645
267°35'
30"
ICE/STORE WINE
TILES
1592
TILES
1.0 2°26'
FALL
PD
0.95
277°16'30" 3000
1 7.283
1
OUTDOOR SHOWER
7°16'30"
3.0
3000
277°16'30"
22.12
BEACHES NOOSA
NORTH 7/56 DAVID LOW WAY, SUNRISE 5 6 7
BEACH QLD 4567 W3.2 W3.2 W3.3
AREA: 774.63m²
A B C D
CLIENT: Maxine Horne PROJECT: BEACHES
www.chriscloutdesign.com.au GENERAL NOTES:
Use written dimensions only. DO NOT scale drawings. Contractors SITE ADDRESS: BEACHES NOOSA 7/56 David Low Way, SUNRISE BEACH QLD 4567
A: OFFICE 1/20 DUKE STREET, to verify all dimensions on site prior to commencing works. Site
SUNSHINE BEACH, QLD 4567, location in accordance with engineers details. These drawings are to DRAWING TITLE: LOWER FLOOR PLAN
be read in conjunction with engineers design and details, the
E: [email protected] DATE: 31-08-23 SCALE: 1 : 100 @ A2 DRAWN BY: C.CLOUT
P: (07) 54748 107 BSA LICENCE: 1127508
accompanying building specification and schedule of finishes. If in
doubt, please request clarification. DO NOT ASSUME. ISSUE: PRELIMINARY WORKING DRAWINGS
W1.0
Section 4
KEY: AREAS:
AW - AWNING WINDOW CO - COFFEE MACHINE N - NICHE SLD - SLIDING DOOR LOWER FLOOR: 229.7m² APPROVED WITH CONDITIONS
B - BATH FD - FRENCH DOORS OV - OVEN SLW - SLIDING WINDOW GROUND FLOOR: 235m² This is an Approved Building Works Document. Refer
BFD - BI-FOLD DOOR FR - FRIDGE P - PANTRY T - TUB UPPER FLOOR: 141.7m² A B C D to the Decision Notice for conditions of approval
BFW - BI-FOLD WINDOW FP - FIXED PANEL WINDOW SH - SHOWER V - VANITY BASIN GFA= 606.4m² PERMIT No. 35484
CT - COOK TOP L - LOUVER WINDOW S - SINK WC - WATER CLOSET SITE = 331.3/ 774.63 DATE 09/11/2023
5 6 7 ISSUED BY COASTAL BUILDING
W3.2 W3.2 W3.3 CERTIFICATIONS PTY LTD
97°21'20"
33.993
3000
RC COLUMN TO ENGINEERS DESIGN
AND DETAIL. RENDER AND PAINT FINISH
OVER - REFER TO EXTERNAL COLOURS
UNDERGROUND
SERVICES
4 RC COLUMN TO ENGINEERS DESIGN 4
FALL
AND DETAIL. RENDER AND PAINT FINISH W6 W7 W8 W9 W10
W5
OVER - REFER TO EXTERNAL COLOURS SH SH SH
3000 10000
COASTAL SETBA
BED 2 BED 3 CK
4 CARPET 720CSD ENS CARPET 720CSD ENS ENS 720CSD GUEST 4
D4 TILES RL 20230 TILES TILES CARPET
W3.1 W3.1
.
D5
.
70mm
STONE CLAD FRONT FENCE TO
LAWN SD
ENGINEERS DESIGN AND DETAIL 720D PD
SD SD
ROBE ROBE ROBE
CARPET 720D CARPET CARPET 720D
RC FEATURE COLUMNS TO 2/600D SLD
3 ENGINEERS DESIGN AND DETAIL
LIFT
SJD
2/820D
730mm
RC COLUMN TO ENGINEERS DESIGN
AND DETAIL. RENDER AND PAINT FINISH
3
OVER - REFER TO EXTERNAL COLOURS
DN
1 2 3 TERRACE DRAINAGE TO
ENTRY GATE AND HYDRAULIC ENGINEERS
SCREEN - SEE DETAILS SEE JOINERY DRAWINGS FOR
ALL CABINETRY ITEMS DESIGN AND DETAIL
GATE RL 20230 ENTRY FEATURE TREE
FALL
VO
D1
TILES
FAMILY
ID
DAVID LOW WAY
AB
THRESHOLD DRAINAGE RL 20230
VOID TILES
OV
TO HYDRAULIC SD THRESHOLD DRAINAGE TO
RL 19500 D6
E
HYDRAULIC ENGINEERS
.
ENGINEERS DESIGN UP DN
DESIGN AND DETAIL
AND DETAIL 1 16 REFER TO SCHEDULES
FOR ALL INTERNAL
2 STAIRS 15
FINISHES
3 SEE JOINERY 14
1 2 3
182°26'
3 3
21.285
DRAWINGS
LINE OF SEW ER
4 13 PLASTERBOARD BALUSTRADE. ENSURE
W3.1 5 12 FINISHED BALUSTRADE HEIGHT IS MIN. DN W3.1
1000mm ABOVE FINISHED FLOOR LEVEL
EXISTING TREE TO BE REMOVED 6
7
8 9
10
11
TERRACE
191°14'10"
2 RC COLUMN TO ENGINEERS DESIGN
2
25.0
820D 820D
SECRET SECRET AND DETAIL. RENDER AND PAINT FINISH
STONE CLAD FRONT DOOR DOOR SLD OVER - REFER TO EXTERNAL COLOURS
2 FENCE TO ENGINEERS 2
DESIGN AND DETAIL SD
SMOKE ALARMS IN
W3.0 ACCORDANCE WITH BCA AND W3.0
LINEN
CONCRETE BLOCK FEATURE AUSTRALIAN STANDARDS
COLUMNS TO ENGINEERS
DESIGN AND DETAIL (TED) GLASS BALUSTRADE ON STAND OFF PINS TO
FALL
SPEC. ENSURE FINISHED BALUSTRADE HEIGHT
BED 1 IS MIN.1000mm ABOVE FINISHED FLOOR LEVEL FRAMELESS GLASS
DRIVEWAY CROSSOVER & EXISTING TREE TO BE REMOVED HERS CARPET D7 BALUSTRADE TO BE
.
DESIGN DRIVEWAY GARAGE CARPET
DESIGNED AND
GD1 RL 19500
CONCRETE LAUNDRY
TO BE IN ACCORDANCE LINEA WEATHERBOARD CLADDING TILES
HALF HEIGHT WALL TO
ENGINEERS DESIGN AND DETAIL
APPROVED BY
OVER GARAGE DOOR TO SPEC
STRUCTURAL
FLOOR ABOVE
WITH RL 20230 PD
DRAWINGS RS-049 & RS-050 T.O.W RL 19930 ENGINEER
LINES OF
2/500D
SECRET
DOOR SLD
T
RC COLUMN TO ENGINEERS DESIGN
AND DETAIL. RENDER AND PAINT FINISH
WC 620GD OVER - REFER TO EXTERNAL COLOURS
1 B 1
.
D10 D9
W/M ENSUITE
W3.0 W3.0
70mm
70mm
HIS TILES D8
.
620GD
3000
3000
SH
1787
30"
267°35'
1.0
STORE DRYING
2°26' SH
V V
FALL
TILES TILES PD
0.95 W12 W11
277°16'30" RL 20160
1 7.283 GATE 10000 1
7°16'30"
EXISTING TREE TO BE REMOVED RC COLUMN TO ENGINEERS DESIGN
DOG YARD/SERVICES AND DETAIL. RENDER AND PAINT FINISH
3.0
3000
OVER - REFER TO EXTERNAL COLOURS
GATE AND SCREEN - SEE DETAILS
GATE GATE
LARGE PANDANUS TREE AND 277°16'30"
COCONUT PALMS FOR PRIVACY
22.12
BEACHES NOOSA
NORTH 7/56 DAVID LOW WAY, SUNRISE 5 6 7
BEACH QLD 4567 W3.2 W3.2 W3.3
AREA: 774.63m²
A B C D
CLIENT: Maxine Horne PROJECT: BEACHES
www.chriscloutdesign.com.au GENERAL NOTES:
Use written dimensions only. DO NOT scale drawings. Contractors SITE ADDRESS: BEACHES NOOSA 7/56 David Low Way, SUNRISE BEACH QLD 4567
A: OFFICE 1/20 DUKE STREET, to verify all dimensions on site prior to commencing works. Site
SUNSHINE BEACH, QLD 4567, location in accordance with engineers details. These drawings are to DRAWING TITLE: GROUND FLOOR PLAN
be read in conjunction with engineers design and details, the
E: [email protected] DATE: 31-08-23 SCALE: 1 : 100 @ A2 DRAWN BY: C.CLOUT
P: (07) 54748 107 BSA LICENCE: 1127508
accompanying building specification and schedule of finishes. If in
doubt, please request clarification. DO NOT ASSUME. ISSUE: PRELIMINARY WORKING DRAWINGS
W1.1
Section 5
KEY: AREAS:
AW - AWNING WINDOW CO - COFFEE MACHINE N - NICHE SLD - SLIDING DOOR LOWER FLOOR: 229.7m² APPROVED WITH CONDITIONS
B - BATH FD - FRENCH DOORS OV - OVEN SLW - SLIDING WINDOW GROUND FLOOR: 235m² This is an Approved Building Works Document. Refer
BFD - BI-FOLD DOOR FR - FRIDGE P - PANTRY T - TUB UPPER FLOOR: 141.7m² A B C D to the Decision Notice for conditions of approval
BFW - BI-FOLD WINDOW FP - FIXED PANEL WINDOW SH - SHOWER V - VANITY BASIN GFA= 606.4m² PERMIT No. 35484
CT - COOK TOP L - LOUVER WINDOW S - SINK WC - WATER CLOSET SITE = 331.3/ 774.63 DATE 09/11/2023
5 6 7 ISSUED BY COASTAL BUILDING
W3.2 W3.2 W3.3 CERTIFICATIONS PTY LTD
97°21'20"
33.993
3000
CONCRETE BLOCK FEATURE PLANTER DRAINAGE TO GLASS BALUSTRADE ON STAND OFF PINS TO PRIVACY SCREEN (SDD)
COLUMNS TO ENGINEERS DESIGN HYDRAULIC ENGINEERS SPEC. ENSURE FINISHED BALUSTRADE HEIGHT
AND DETAIL DESIGN AND DETAIL IS MIN.1000mm ABOVE PLANTER WALL
ACRYLIC POOL WINDOW TO SPEC. SUPPLIER
UNDERGROUND
4087 TO CONFIRM RECESS DEPTH AND PANEL
SERVICES
4 VOID A OUTDOOR SHOWER
WET EDGE CATCHMENT
THICKNESS PRIOR TO ORDERING
4
T.O.W RL 24330 BO VE PLANTER
PL
3000 T.O.W RL 23980 ACRYLIC POOL WINDOW 10000
AN
TE
COASTAL SETBA
R
CK
GATE
W15 W16
4 4
PDR GLASS POOL FENCE ON SPIGOTS TO SPEC.
W3.1 TILES TV/FIRE W3.1
FALL
0.7 ENSURE FINISHED HEIGHT IS MIN.1200mm
W14 EXTENDED TRACK OF D11 ABOVE FINISHED FLOOR LEVEL
OREGON BOARD FORMED 0.5
CONCRETE WALL TO ENGINEERS
820D RC FEATURE COLUMNS TO
DESIGN AND DETAIL (TED)
ENGINEERS DESIGN AND DETAIL
DAYBED SLABS TO ENGINEERS DESIGN
AND DETAIL (TED)
DAYBED
RC FEATURE COLUMNS TO SLAB RL 23530
3 ENGINEERS DESIGN AND DETAIL
LIFT LIVING
TILES
POOL WALL TO ENGINEERS DESIGN
AND DETAIL (TED)
3
1.5x1.7
RL 23530
ACRYLIC SPA WINDOW TO SPEC. SUPPLIER TO
LINES OF RO
CONFIRM RECESS DEPTH AND PANEL
THICKNESS PRIOR TO ORDERING
PLASTERBOARD TO SPEC. ENSURE FINISHED THRESHOLD DRAINAGE TO SPA
FALL
BALUSTRADE HEIGHT IS MIN.1000mm ABOVE HYDRAULIC ENGINEERS
FINISHED FLOOR LEVEL VOID DESIGN AND DETAIL
0.9 POOL
E
DAVID LOW WAY
OF
OV
. 4.8x13.6
D11
AB
ABOVE
0.5 0.5 MAX. DEPTH 1.1m ACRYLIC POOL WINDOW TO SPEC. SUPPLIER
TO CONFIRM RECESS DEPTH AND PANEL
HT
DN REFER TO SCHEDULES
W13 FOR ALL INTERNAL THICKNESS PRIOR TO ORDERING
LIG
1 16
FINISHES
SKY
2 15
WET EDGE CATCHMENT TO
3 14 DAYBED ENGINEERS DESIGN AND DETAIL (TED)
182°26'
3 STAIRS SLAB RL 23530 3
21.285
LINE OF SEW ER
4 13
SEE JOINERY
W3.1 5
DRAWINGS 11
12
POOL FENCING W3.1
6
7 10 DINING
8 9
CONFLICT MAY
191°14'10"
PLANTER DRAINAGE TO HYDRAULIC
OCCUR IN THIS AREA
2 ENGINEERS DESIGN AND DETAIL
2
FALL
SD
25.0
SMOKE ALARMS IN
0.5
0.7
ACCORDANCE WITH BCA AND
2 AUSTRALIAN STANDARDS
PLANTER T.O.W RL 23530 T.O.W RL 22550 BUILDER TO 2
E CONFIRM DETAIL
ABOV
WINE DISPLAY
W3.0 STRUCTURAL T.O.W RL 22550 W3.0
COLUMN (TED) BEFORE
IGHT
GATE
CONSTRUCTION
SKYL
GATE
FALL
DN
200x50 ALUMINIUM EXTRUSIONS TO
KITCHEN
1 2 FRAMELESS GLASS
SPEC - SEE DETAILS
PANTRY ACRYLIC POOL WINDOW TO SPEC. SUPPLIER BALUSTRADE TO BE
500mm TO CONFIRM RECESS DEPTH AND PANEL
TILES THICKNESS PRIOR TO ORDERING DESIGNED AND
SEE JOINERY DRAWINGS FOR
ALL CABINETRY ITEMS RL 23530 RL 23030 APPROVED BY
FALL
STRUCTURAL
FALL
ENGINEER
PLANTER
RECESSED GLASS BALUSTRADE TO SPEC.
SLW ENSURE FINISHED BALUSTRADE HEIGHT IS
W17 OUTDOOR ENTERTAINING MIN.1000mm ABOVE FINISHED FLOOR LEVEL
3000 TILES
LANDSCAPE
F
1 PLANTER FOR 1
PRIVACY
W3.0 W3.0
S
TERRACE DRAINAGE TO PLANTER DRAINAGE TO
3000
HYDRAULIC ENGINEERS HYDRAULIC ENGINEERS
FALL
30" DESIGN AND DETAIL DESIGN AND DETAIL
267°35' PLANTER DRAINAGE TO
BBQ
HYDRAULIC ENGINEERS SJD
1.0 2°26' DESIGN AND DETAIL
FALL
0.95
277°16'30"
1 7.283
10000 1
7°16'30"
GLASS BALUSTRADE ON SPIGOTS TO ALUMINIUM PRIVACY SCREENS TO
3.0
SPEC. ENSURE FINISHED SPEC - SEE DETAILS
3000
BALUSTRADE HEIGHT IS MIN.1200mm
ABOVE FINISHED FLOOR LEVEL
LARGE PANDANUS TREE AND
COCONUT PALMS FOR PRIVACY 277°16'30"
22.12
BEACHES NOOSA
NORTH 7/56 DAVID LOW WAY, SUNRISE 5 6 7
BEACH QLD 4567 W3.2 W3.2 W3.3
AREA: 774.63m²
A B C D
CLIENT: Maxine Horne PROJECT: BEACHES
www.chriscloutdesign.com.au GENERAL NOTES:
Use written dimensions only. DO NOT scale drawings. Contractors SITE ADDRESS: BEACHES NOOSA 7/56 David Low Way, SUNRISE BEACH QLD 4567
A: OFFICE 1/20 DUKE STREET, to verify all dimensions on site prior to commencing works. Site
SUNSHINE BEACH, QLD 4567, location in accordance with engineers details. These drawings are to DRAWING TITLE: UPPER FLOOR PLAN
be read in conjunction with engineers design and details, the
E: [email protected] DATE: 31-08-23 SCALE: 1 : 100 @ A2 DRAWN BY: C.CLOUT
P: (07) 54748 107 BSA LICENCE: 1127508
accompanying building specification and schedule of finishes. If in
doubt, please request clarification. DO NOT ASSUME. ISSUE: PRELIMINARY WORKING DRAWINGS
W1.2
Section 6
ROOF NOTES
APPROVED WITH CONDITIONS
This is an Approved Building Works Document. Refer
ROOF AND WALL CLADDING TO FULLY COMPLY
WITH NCC.2 PART 3.5
A B C D to the Decision Notice for conditions of approval
REFER TO MANUFACTURES SPECIFICATION AND PERMIT No. 35484
DETAILS FOR ALL PRODUCT INSTALLATIONS
DATE 09/11/2023
CONCRETE ROOF TO ENGINEERS DESIGN AND
DETAIL (TED). APPLY WATERPRROFING OVER - 5 6 7 ISSUED BY COASTAL BUILDING
WATERPROOF MEMBRANE TO BE 'DURAM 195
WATERPROOFING MEMBRANE'. WHERE EXPOSED W3.2 W3.2 W3.3 CERTIFICATIONS PTY LTD
TO ELEMENTS, THE MEMBRANE IS TO BE TOPPED
WITH 'MULTITHANE ATC'.
ALL DOWNPIPE COLOUR TO MATCH BACKGROUND
WALL FINISH WHERE VISIBLE UNLESS OTHERWISE
STATED. 97°21'20"
REFER TO SCHEDULE FOR FINISHES.
33.993
DOWNPIPES TO BE CONCEALED FROM VIEWS. ALL
PENETRATIONS TO BE PROPERLY SEALED TO
PREVENT WATER INGRESS.
3000
REFER TO HYDRAULICS DESIGN AND DETAILS
REPORT ANY DISCREPANCIES TO BUILDING
DESIGNER
ROOF KEY
4087
DP - DOWNPIPE
SP - SOLAR PANEL 4 4
VOID
SOLAR REQUIRED TO ENSURE COMPLIANCE WITH
3000 10000
BASIX - REFER TO DOCUMENTATION
COASTAL SETBA
CK
4 4
W3.1 W3.1
FALL
3 2405
FALL FALL
3
HOB RL 26580
300mm PROVIDE PROVISION FOR
DAVID LOW WAY
MIN 5kW SOLAR SYSTEM
4920
SKYLIGHT -
SEE DETAILS
FALL
182°26'
3 3
21.285
LINE OF SEW ER
FALL
W3.1 W3.1
HOB RL 26580 FALL
191°14'10"
2 2
25.0
HOB RL 26330
2 2
W3.0 W3.0
SKYLIGHT -
SEE DETAILS
4047
FALL FALL
FALL FALL
1205
2740
1 1
W3.0 W3.0
3000
30"
267°35'
1.0 2°26'
0.95
277°16'30"
1 7.283
1
7°16'30"
3000
3.0
3000
277°16'30"
22.12
BEACHES NOOSA
NORTH 7/56 DAVID LOW WAY, SUNRISE 5 6 7
BEACH QLD 4567 W3.2 W3.2 W3.3
AREA: 774.63m²
A B C D
CLIENT: Maxine Horne PROJECT: BEACHES
www.chriscloutdesign.com.au GENERAL NOTES:
Use written dimensions only. DO NOT scale drawings. Contractors SITE ADDRESS: BEACHES NOOSA 7/56 David Low Way, SUNRISE BEACH QLD 4567
A: OFFICE 1/20 DUKE STREET, to verify all dimensions on site prior to commencing works. Site
SUNSHINE BEACH, QLD 4567, location in accordance with engineers details. These drawings are to DRAWING TITLE: ROOF PLAN
be read in conjunction with engineers design and details, the
E: [email protected] DATE: 31-08-23 SCALE: 1 : 100 @ A2 DRAWN BY: C.CLOUT
P: (07) 54748 107 BSA LICENCE: 1127508
accompanying building specification and schedule of finishes. If in
doubt, please request clarification. DO NOT ASSUME. ISSUE: PRELIMINARY WORKING DRAWINGS
W1.3
Section 7
ENTRY GATE (SDD) ALUMINIUM DOORS AND WINDOWS TO SPEC
RC FEATURE COLUMNS TO ENGINEERS STONE CLAD FRONT FENCE TO ENGINEERS
DESIGN AND DETAIL DESIGN AND DETAIL (TED)
STAINLESS STEEL STREET SIGNAGE TO 200x50 ALUMINIUM EXTRUSIONS TO SPEC - SEE
SPEC (SDD) DETAILS
ISTING
8m ABOVE EX UNDARY ABODO VULCAN SCREENING
BOUNDARY
BOUNDARY
E AT BO
GROUND LIN
UPPER FLOOR PP RL 26030 UPPER FLOOR PP RL 26030
OREGON BOARD FORMED CONCRETE
WALL TO ENGINEERS DESIGN AND
DETAIL (TED) TIMBER CLADDING OVER GARAGE AND
2500
2500
GARAGE DOOR TO SPEC
CONCRETE BLOCK FRONT FENCE TO
ENGINEERS DESIGN AND DETAIL (TED)
UPPER FLOOR RL 23530 UPPER FLOOR RL 23530
300
300
GROUND FLOOR PP RL 23230 GROUND FLOOR PP RL 23230
TIMBER BATTEN GATES TO SPEC
3000
3000
GROUND FLOOR RL 20230 GROUND FLOOR RL 20230
ARY
EXISTING GROUND LINE AT BOUND
APPROVED WITH CONDITIONS
This is an Approved Building Works Document. Refer
to the Decision Notice for conditions of approval
PERMIT No. 35484
WESTERN ELEVATION DATE 09/11/2023
SCALE: 1 : 100
ISSUED BY COASTAL BUILDING
CERTIFICATIONS PTY LTD
FRAMELESS GLASS
BALUSTRADE TO BE
DESIGNED AND
APPROVED BY
STRUCTURAL
ENGINEER
ALUMINIUM DOORS AND WINDOWS TO SPEC GLASS POOL FENCE ON SPIGOTS TO SPEC.
ENSURE FINISHED HEIGHT IS MIN.1200mm
ABOVE FINISHED FLOOR LEVEL
RECESSED GLASS BALUSTRADE TO SPEC. ACRYLIC POOL WINDOW TO SPEC. SUPPLIER
ENSURE FINISHED BALUSTRADE HEIGHT IS TO CONFIRM RECESS DEPTH AND PANEL
MIN.1000mm ABOVE FINISHED FLOOR LEVEL THICKNESS PRIOR TO ORDERING
UPPER FLOOR PP RL 26030 UPPER FLOOR PP RL 26030
PRIVACY SCREENS TO SPEC (SDD)
2500
2500
8m ABOVE EXISTING GROUND
LINE AT BOUNDARY
BOUNDARY
CONCRETE BLOCK FRONT FENCE TO
ENGINEERS DESIGN AND DETAIL (TED)
BOUNDARY
UPPER FLOOR RL 23530 UPPER FLOOR RL 23530
300
300
GROUND FLOOR PP RL 23230 GROUND FLOOR PP RL 23230
3000
3000
CONCRETE WET EDGE WALL TO ENGINEERS
TIMBER BATTEN GATES TO SPEC DESIGN AND DETAIL (TED)
GROUND FLOOR RL 20230 GROUND FLOOR RL 20230
300
300
LOWER FLOOR PP RL 19930 LOWER FLOOR RL 19930
3480
3480
LOWER FLOOR RL 16450 LOWER FLOOR RL 16450
EXISTING GROUND LINE AT BOUN
DARY
EASTERN ELEVATION
SCALE: 1 : 100
CLIENT: Maxine Horne PROJECT: BEACHES
www.chriscloutdesign.com.au GENERAL NOTES:
Use written dimensions only. DO NOT scale drawings. Contractors SITE ADDRESS: BEACHES NOOSA 7/56 David Low Way, SUNRISE BEACH QLD 4567
A: OFFICE 1/20 DUKE STREET, to verify all dimensions on site prior to commencing works. Site
SUNSHINE BEACH, QLD 4567, location in accordance with engineers details. These drawings are to DRAWING TITLE: ELEVATIONS
be read in conjunction with engineers design and details, the
E: [email protected] DATE: 31-08-23 SCALE: 1 : 100 @ A2 DRAWN BY: C.CLOUT
P: (07) 54748 107 BSA LICENCE: 1127508
accompanying building specification and schedule of finishes. If in
doubt, please request clarification. DO NOT ASSUME. ISSUE: PRELIMINARY WORKING DRAWINGS
W2.0 -1
Section 8
CONCRETE BLOCK FEATURE
COLUMNS TO ENGINEERS
DESIGN AND DETAIL (TED)
BOUNDARY
SUSPENDED CONCRETE ROOF TO
ENGINEERS DESIGN AND DETAIL (TED)
ENSURE MIN. 1:100 FALL IS ACHIEVED
LINE AT BOUNDARY
GROUND
EXISTING
UPPER FLOOR PP RL 26030 8m ABOVE UPPER FLOOR PP RL 26030
OREGON BOARD FORMED
FRAMELESS GLASS POOL FENCE ON CONCRETE WALL TO ENGINEERS
STAND OFF PINS TO SPEC DESIGN AND DETAIL (TED)
2500
2500
PRIVACY SCREEN (SDD)
UPPER FLOOR RL 23530 PLANTER WALLS TO ENGINEERS DESIGN UPPER FLOOR RL 23530
BOUNDARY
AND DETAIL (TED)
300
300
GROUND FLOOR PP RL 23230 GROUND FLOOR PP RL 23230
3000
3000
ALUMINIUM WINDOWS AND
DOORS TO SPEC
GROUND FLOOR RL 20230 GROUND FLOOR RL 20230
300
300
LOWER FLOOR RL 19930 LOWER FLOOR PP RL 19930
3480
3480
LINE AT BOUNDARY
GROUND
EXISTING
LOWER FLOOR RL 16450 LOWER FLOOR RL 16450
NORTHERN ELEVATION
SCALE: 1 : 100 APPROVED WITH CONDITIONS
This is an Approved Building Works Document. Refer
to the Decision Notice for conditions of approval
PERMIT No. 35484
DATE 09/11/2023
ISSUED BY COASTAL BUILDING
FRAMELESS GLASS CERTIFICATIONS PTY LTD
BALUSTRADE TO BE
DESIGNED AND
APPROVED BY
STRUCTURAL
ENGINEER
BOUNDARY 8m ABOV
E EXISTIN
G GROUND
LINE AT BO
UNDARY
UPPER FLOOR PP RL 26030 UPPER FLOOR PP RL 26030
2500
2500
BOUNDARY
GLASS POOL FENCE ON SPIGOTS TO
SPEC - ENSURE FINISHED HEIGHT IS MIN.
1200mm ABOVE FINISHED FLOOR LEVEL
UPPER FLOOR RL 23530 UPPER FLOOR RL 23530
300
300
GROUND FLOOR PP RL 23230 GROUND FLOOR PP RL 23230
RECESSED ACRYLIC POOL WINDOW TO
SPEC (SDD) CONFIRM RECESS DEPTH WITH
SUPPLIER PRIOR TO ORDERING
3000
3000
ALL CONCRETE STRUCTURE TO
ENGINEERS DESIGN AND DETAIL (TED)
GROUND FLOOR RL 20230 GROUND FLOOR RL 20230
300
300
LOWER FLOOR PP RL 19930 LOWER FLOOR RL 19930
EXISTING
ALL RETAINING WALLS TO ENGINEERS GROUND
LINE AT BO
UNDARY
3480
3480
DESIGN AND DETAIL (TED)
LOWER FLOOR RL 16450 LOWER FLOOR RL 16450
SOUTHERN ELEVATION
SCALE: 1 : 100
CLIENT: Maxine Horne PROJECT: BEACHES
www.chriscloutdesign.com.au GENERAL NOTES:
Use written dimensions only. DO NOT scale drawings. Contractors SITE ADDRESS: BEACHES NOOSA 7/56 David Low Way, SUNRISE BEACH QLD 4567
A: OFFICE 1/20 DUKE STREET, to verify all dimensions on site prior to commencing works. Site
SUNSHINE BEACH, QLD 4567, location in accordance with engineers details. These drawings are to DRAWING TITLE: ELEVATIONS
be read in conjunction with engineers design and details, the
E: [email protected] DATE: 31-08-23 SCALE: 1 : 100 @ A2 DRAWN BY: C.CLOUT
P: (07) 54748 107 BSA LICENCE: 1127508
accompanying building specification and schedule of finishes. If in
doubt, please request clarification. DO NOT ASSUME. ISSUE: PRELIMINARY WORKING DRAWINGS
W2.1
The text continues on section 9.
Used in these records
35484 APPROVED PLANS BA.pdfRelated documentApplication case desk ↗
About this file
- File size
- 18.3 MB (very large file)
- File type
No other editions are linked here.
Original file
Log in to download the original file
The download may take a few minutes. On mobile data, it is best to wait for Wi-Fi.