2020-02-11 P&E Agenda - Item 4 - Attachment 2 - Subordinate Local Law No 1 (Administration) 2015

            Noosa Shire Council Subordinate Local Law No. 1 (Administration) 2015           34


                           and
      (d)    for the avoidance of doubt, if the premises on which 1 or more advertising devices
             is installed is a tenancy, and the tenancy forms part of a shopping centre, the sign
             face area of all advertising devices on the tenancy and the shopping centre must
             not exceed, collectively —
             (i)    for the shopping centre — a sign face area calculated in accordance with
                    paragraph (b); and
             (ii)   for the tenancy — a sign face area calculated in accordance with
                    paragraph (c); and
      (e)    the number of pylon signs on premises must be limited to 1 pylon sign per street
             front boundary of the premises; and
      (f)    if the advertising device is installed on 1 tenancy within the Cooroy Industrial
             Zone or the Noosaville Industrial Zone, but not located on premises fronting
             Eumundi Noosa Road or Walter Hay Drive—the sign face area of the advertising
             device must not exceed whichever is the lesser of—
             (i)    0.75m2 per linear metre of the building on the street front boundary of the
                    tenancy; and
             (ii)   6m2.
(3)   This subsection prescribes general requirements for advertising devices as follows—
      (a)    the construction of the advertising device must be structurally sound; and
      (b)    the height, dimensions and overall size of the advertising device must not exceed
             requirements prescribed under the authorising local law for the advertising device;
             and
      (c)    the advertising device must not be installed on a local government controlled area
             or road abutting land unless—
             (i)    it is not physically possible to install the advertising device on the land; and
             (ii)   the local government has granted an approval in respect of the installation of
                    the advertising device on the local government controlled area or road
                    abutting the land; and
      (d)    the advertising device must be of a professional standard and must not be hand
             painted or written; and
      (e)    the advertising device must comply with the requirements of all levels of
             government; and
      (f)    the advertising device must not be illuminated prior to the grant of an approval
             which authorises the illumination of the advertising device; and
      (g)    the advertising device must be architecturally attractive and contribute to the
             retention and enhancement of the character of the area in which the advertising
             device is to be displayed.
(4)   This subsection prescribes general design and amenity requirements for an advertising
      device as follows—
      (a)    the advertising device must be compatible with, complement, and not detract
             from, the characteristics of the natural and built environment in which the