2020-02-11 P&E Agenda - Item 4 - Attachment 2 - Subordinate Local Law No 1 (Administration) 2015

            Noosa Shire Council Subordinate Local Law No. 1 (Administration) 2015         36


             and
      (c)    the advertising device must generally be confined to flat surfaces, such as a plain
             wall, spandrel or parapet and not be positioned across a window, column,
             balustrade or other design feature.
(7)   This subsection prescribes requirements about safety for an advertising device as
      follows—
      (a)    the advertising device must not create a traffic, pedestrian or cyclist safety hazard;
             and
      (b)    the advertising device must be constructed to an appropriate standard to ensure
             public safety; and
      (c)    where an advertising device uses electricity—the advertising device must be safe
             with electrical componentry integrated into the advertising device; and
      (d)    the advertising device must not physically obstruct the passage of, or pose a
             hazard for, pedestrians, cyclists or drivers of motor vehicles; and
      (e)    the advertising device must not restrict sight lines at an intersection or a site
             access point; and
      (f)    the advertising device must be constructed such that no support, fixing or other
             system required for the proper installation of the advertising device is exposed;
             and
      (g)    the advertising device must be constructed such that conduits, wiring, switches
             and other electrical apparatus installed on the advertising device are concealed
             from view; and
      (h)    the advertising device must be constructed such that no electrical equipment is
             mounted on an exposed surface of the advertising device.
(8)   This subsection prescribes electrical supply infrastructure requirements for an
      advertising device as follows—
      (a)    the advertising device must be installed an adequate, and safe, distance from
             electrical infrastructure including any substation overhead power line, power pole
             and transformer; and
      (b)    any structure associated with an advertising device must not be constructed under
             overhead electricity transmission lines or within an electricity transmission line
             easement.
(9)   This subsection prescribes requirements about the maintenance of an advertising
      device as follows—
      (a)    the advertising device must be maintained in good order and condition at all
             times, including the maintenance of any ancillary works associated with the
             display of the advertising device; and
      (b)    the maintenance obligation continues for as long as the advertising device remains
             on display.
(10) This subsection prescribes requirements about the display of an advertising device at a
     shopping centre as follows—the display of advertising devices at the shopping centre
     must be undertaken in compliance with any advertising device management plan
     approved by the local government for the shopping centre.