Original source · versioned page text
2020-02-11 P&E Agenda - Item 4 - Attachment 2 - Subordinate Local Law No 1 (Administration) 2015
Text sections have not been matched to the original PDF pages. Use the original document to check page numbers.
Noosa Shire Council Subordinate Local Law No. 1 (Administration) 2015 39
schedule of fees and charges; and
(g) if the advertising device is to be installed at a shopping centre—an advertising
device management plan which contains particulars of each advertising device
which is to be installed at the shopping centre; and
(h) if the advertising device is to be installed on a heritage site, or in a character area,
identified on a heritage overlay map included in the planning scheme of the local
government—a “face-grid” analysis that—
(i) identifies the grid established by the elements of the façade such as
windows, door awnings, cornices, parapets, columns etc; and
(ii) identifies the most appropriate location for the advertising device but
generally aligns with the grid and positions the advertising device within a
flat surface such as a parapet or panel between openings and not located on
a column or other projecting elevation feature.
8 Additional criteria for the granting of approval
The local government may only grant an approval for the undertaking of the prescribed
activity of the installation of an advertising device which is an approval required
advertising device if the local government is satisfied the proposed operation and
management of the activity would be consistent with additional criteria as follows—
(a) if the advertising device is a freestanding sign, pylon sign or pole sign—
(i) the height of the advertising device must not exceed 5m above ground level
directly adjacent to the advertising device; and
(ii) the sign face area of the advertising device must not exceed 4m2; and
(iii) the number of advertising devices displayed on premises must not exceed a
maximum of 1 advertising device per street front boundary of the premises
(including premises with a multiple occupancy building on the premises);
and
(iv) the advertising device must be mounted as a freestanding structure in a
landscaped environment and must not be a “V” shaped sign; and
(v) the advertising device must be situated at least half its height from any
boundary of the premises on which the advertising device is installed; and
(vi) the advertising device must be designed and treated in such a way that the
supporting framework and the back of the sign face area of the advertising
device blends with the surrounding streetscape or field of view; and
(vii) the thickness of the advertising device must not exceed a maximum of
75mm per metre of height of the advertising device above ground level; and
(b) if the advertising device is an illuminated sign —
(i) the illuminated sign must not be installed or displayed in an area which is
identified in a zone map in the planning scheme of the local government as a
residential zone, rural residential zone, rural zone, environmental
management zone or conservation zone; and
(ii) the number of illuminated signs displayed on premises must not exceed a
maximum of—
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalLog in to download the original file
Large file: the download may take up to a minute.
Searchable page text hides email addresses. Original files are unchanged and may show email addresses.