Skip to the record
Accept no imitations.

Original source · versioned page text

RFI - Attachment H - Stormwater Management Plan_Issue C_

of 64

Page text shows just the words. Original shows the document exactly as it was published.

Page text read automatically using OCR, there may be inaccuracies

Very large file: it may take a few minutes

The original of this document is very large (15.9 MB). Opening the original or downloading it may take a few minutes. Please be patient and don't click again. The page text is quick to read. If you are on mobile data, it is best to wait until you are on Wi-Fi.

Plans and drawings

This document appears to be plans or drawings. Its page text below holds only the words printed on the drawings, without the drawings themselves, so it may be jumbled or hard to follow. To see the plans as drawn, choose Original above or download the file (both need you to log in).

Log in to see the plans as drawn
3.2 Stormwater pit cover removal
3.2.1 Hinged pit grates

These are the steps for opening a hinged pit grate:
                                                                       Please note: Many cast iron hinges are not hinged
 1   Insert the lifting hooks beneath the grate.
                                                                        securely (to enable the removal of the grate). This
     (Position indicated in Photo 3)
                                                                        may result in the pit grate not being able to sit in an
 2   Check hinge point is not damaged and debris is not                 open position. Additionally the hinge pins may also
     caught in the hinge area.                                          be damaged or corroded, which may allow the
                                                                        grate to fall into the pit. Such pit grates can be
3    Fully open pit grate, ensuring that the grate will stay in
                                                                        removed using the method indicated below for
     the open position without any external forces applied.
                                                                        non-hinged grates.
     Grates that do not remain open without being held
     should be removed or secured during cleaning or
     maintenance activities. Photo 4 indicates the grate being
     opened and grate resting freely in the open position,
     respectively.




 Photo 3 Lifting the grate                                        Photo 4 Fully open grate




 Photo 5 Lowering grate



                                                                                       Stormwater360 Operations and maintenance   9
Log in to download the original file

RFI - Attachment H - Stormwater Management Plan_Issue C_.pdf · 15.9 MB (very large file)

Very large file: the download may take a few minutes. If you are on mobile data, it is best to wait until you are on Wi-Fi.

Searchable page text hides email addresses. Original files are unchanged and may show email addresses.

The supporting record

Open full page ↗

Source document

Analyse documents ↗Open full page ↗

My Comparisons

Choose two to four records of the same kind. Drag using a handle or use the “Compare” buttons.

Your selected records are saved in this browser for your account. Results use the filters on the page where you choose “Compare selected”.