Approved Plans - MCU24-0089 & OPW24-0099 · MCU24/0089

                                                                                                                                                                                                                                                                                                                                                          Provide 50x80x3.0 Fabricated Unequal Angle
                                                                                                                                                                                                                                                                                                                                                          (Alloy & Temper - 6060/T5 or 6106/T6)
                                                                                                                                                                                                                                                                                                                                       DJ1                with 2/No.14 x 20mm SS tek screw each way
                                                                                                                                                                     High strength shrinkage
                                                                                                                                                                     compensated grout pad

                                                                                                                                                                                                                                                                                                                                                           BR1




                                                                                                                                                                                                                                                                                                                                             80
                                                                                BR1                                                                                                                                           BR2
                                                                                                                                                                                                                                                                                                                                                  Neoprene washers between
                                                                                                                                                                                                                                                                                                                                                  all SS fixings and aluminum.


                                                                                                                                           Provide 1/No.14 x 20mm SS tek screw each
                                                                                                                                           connection with Neoprene washers between
             400                                                                                                                           all SS fixings and aluminum.
                                                                                                               1                           6mm end plates CFW all round and to BR2
             Typ                    ST
                                         1                                                                  ST                                                                                                                                                                                                                                                                                                            SJ1


                                                                                                                                                                                                                                                                                                                                             SJ1

                                                                                                                                                                                                                                                                                                                                                                                                SJ1




                                                                                                                                                                                                                                                                                                                                                                                                       80
                                                                                                         10mm end plates
                                                                                                         6mm CFW                                                                                                                                                              Provide 50x80x3.0 Fabricated Unequal Angle                      Neoprene washers between
                   1                                                                                     Typical.                                                                                                                                                             (Alloy & Temper - 6060/T5 or 6106/T6)                           all SS fixings and aluminum.
                                                                                                                                                                                                                                                                              with 2/No.14 x 20mm SS tek screw each way
                       1




                                                                                                                                                                                                                                                                                                                                       SJ1
                             1/M16 - 316 threaded
                                                                      C1




                             rod through C1                                                 Refer to S03
                                                                                            for reinforcement details




                                                                                                                                                                                                                                                                                                                                                                       Provide 50x80x3.0 Fabricated Unequal Angle
                                                                                                                                                                                                                                                                                                                                                                       (Alloy & Temper - 6060/T5 or 6106/T6)
                                                                                                                                     BR1
                                                                                                                                                                                                                                                                                                                                                    DJ1                with 2/No.14 x 20mm SS tek screw each way
                                                                                                                                                 125x50x6.0mm UA
                                                                                                                                                 4mm CFW to BR1
                                                                                                                                                 2/M12 SS Grade 316
                                                                                                                                                 chemset anchors.
                                                                                                                                                 200mm min embedment.
                                                                                       High strength shrinkage




                                                                                                                                                                                                                                                                                                                                                          80
                                                                                                                                                 Epoxy = REO 502                                                                                                                                                                                                        BR2
                                                                                       compensated grout pad


                                                                            C1 below                                                                                                                                   C1 below
                                                                                                                                                                                                                                               125x50x6.0mm UA                                                                                                 Neoprene washers between
                                                                                                                                                                                                                                               4mm CFW to BR2                                                                                                  all SS fixings and aluminum.
                                                                                                                                                                                                                                               2/M12 SS Grade 316
                                                                                                                                                                                                                                               chemset anchors.
                                                                                                                                                                                                                                               200mm min embedment.
                                                                                                                                                                                                                                               Epoxy = REO 502

                                                                      BR1



                                                                                                                                                                                                                 BR2                                                                                                                                                                SJ1




                                                                                                                                                                                                                                                                                                                           BR1
                                                                                                                                                                                                                                                                                                                                 Provide 50x80x3.0 Fabricated Unequal Angle
                                                                                                                                                                                                                                                                                  Neoprene washers between                       (Alloy & Temper - 6060/T5 or 6106/T6)




                                                                                                                                                                                                                                                                                                                                                                                                            80
                                                                                                                                                                                                                                                                                                                                                                                                                   BR1
                                                                                                                              C1




                                                                                                                                                                                                                                                                                  all SS fixings and aluminum.                   with 2/No.14 x 20mm SS tek screw each way



                                                                                                                                                                                                                                                                                                           SJ1                   SJ1
                                                                                                                           315mm Ø




                      APPROVED PLAN
                   MCU24/0089 & OPW24/0099
                      NOOSA COUNCIL
                      10 OCTOBER 2024




           Issue   Made By   Date            Description                                   PROPOSED NEW JETTY                                                                                                                                                                                                    Scale : 1:10                                                                 NOTES:
           A       ML        03/04/24        Issue for construction
                                                                                           at LOT No.16 (#33) WYUNA DRIVE, NOOSAVILLE
REVISION




                                                                                                                                                                                                                                                                                                                 Job No.: 24-0122                                                             1. Do not scale drawings.
                                                                                                                                                                                                                                                                                                                                                                                              2. Scale is correct at A3.
                                                                                           CLIENT: PONTOON WORKS
                                                                                                                                                                                                                                                                                                                 Dwg No.: S03                                                                 3. Check and verify all dimensions
                                                                                           Designed By : J. SAYERS BEng (Civil) Hons                                     Drawn By : ML         Date : 03/04/24                                                                                                                                                                                  prior to commencement of work.
                                                                                           Certified By : B.R. CROMAR BEng (Civil) MIEAust CPEng RPEQ NER                                      Date : 03/04/24   Ph: (07) 5444 5578   Email: [email protected]                                      CONNECTION DETAILS