Skip to the record
Accept no substitutions.

Council archive · source document

Part 6 of 37 Appendix 3 - Geotechnical Assessment MCU12/0208

of 95

Text shows just the words. Original shows the document exactly as it was published.

Check the original when the exact wording matters.

Very large file (49.3 MB): the whole original can take several minutes to open, especially on a phone. Text is quick to read.

                                                                                                Noosa on Weyba




3.      INVESTIGATION WORK

3.1     Fieldwork


Fieldwork for the investigation was carried out between the 19 April, 2012 and 4 May, 2012, and included the

drilling of 32 boreholes to a depth of between 3m and 15m at the locations shown on the attached site plan,
Figure 1. The material encountered at each location is described on borehole log sheets included in Annex
A.


Dynamic Cone Penetrometer (DCP)tests were carried out beside each 3m and 6m borehole location and
these tabulated test results are included on the borehole logs.


Standard Penetration        Testing (SPT)and/or undisturbed tube sampling (U50) was carried out at regular
intervals in the 6m and 15m boreholes.


Field pHI and pHlox samples were collected at 0.25m intervals to 2m in depth at select locations.


Eight insitu permeability tests were carried out at select locations across the site.

Fieldwork was carried out in accordance with Australian Standard, AS1726-1993 ’Site Investigation Code’.


3.2     Laboratory Testing

Samples of representative strata were recovered and returned to our NATA accredited soils laboratory. The
following tests were carried out on selected samples;

.     Moisture Content
.     Particle Size Distribution

.     Atterberg Limits
.     Linear Shrinkage
.     Field pHf and pHfox
.     Chromium Reducible Sulphur (Ser)suite
.     Emerson Class


The laboratory test results are included in Annex B.     Laboratory testing was carried out in accordance with
Australian Standard AS1289 ’Laboratory Testing For Engineering Purposes’.




Prepared for Cardno (Old)                                                                               Page 9

Used in these records

About this file

File size
49.3 MB (very large file)
File type
PDF

No other editions are linked here.

Original file

Log in to download the original file

Part 6 of 37 Appendix 3 - Geotechnical Assessment MCU12_0208.pdf · 49.3 MB (very large file)

The download may take a few minutes. On mobile data, it is best to wait for Wi-Fi.

The supporting record

Open full page ↗

Source document

Analyse documents ↗Open full page ↗

My Comparisons

Choose two to four records of the same kind. Drag using a handle or use the “Compare” buttons.

Your selected records are saved in this browser for your account. Results use the filters on the page where you choose “Compare selected”.