Skip to the record
The definitive source for everything Noosa Council.

Council archive · source document

Part 6 of 37 Appendix 3 - Geotechnical Assessment MCU12/0208

of 95

Text shows just the words. Original shows the document exactly as it was published.

Check the original when the exact wording matters.

Very large file (49.3 MB): the whole original can take several minutes to open, especially on a phone. Text is quick to read.

                                                                                                                      Noosa on Weyba




     BH       Root Zone /      Silty/Clayey              Sandy/Silty Clay                 Clayey/Silty Sand              XW          TD
     No        Topsoil            Sand                                                                               Mudstone
                                                Soft to        Stiff         Very          Loose      Medium
                                   FILL
                                                 Firm                       Stiff or                  Dense
                                                                            Better

     18        0.0-0.1               -
                                                0.1-0.8      0.8-1.4        1.4-TO           -          -                -
                                                                                                                                     3.0

     19        0.0-0.1               -
                                                0.1-0.2      0.3-2.0        2.0-TO           -          -                -
                                                                                                                                     3.0

     20        0.0-0.1               -               -           -
                                                                            1.7-TO        0.1-1.4     1.4-1.7            -
                                                                                                                                     3.0

     21        0.0-0.1               -
                                                0.1-0.3      1.0-1.5        1.5-TO        0.3-1.0       -                -           6.0


     22        0.0-0.1               -
                                                0.1-0.5      0.5-0.9        0.9-TO           -          -                -
                                                                                                                                     3.0

     23        0.0-0.1               -               -
                                                             0.8-1.3        1.3-TO        0.1-0.8       -                -
                                                                                                                                     3.0

     24        0.0-0.1               -               -
                                                             0.6-1.2        1.2-TO        0.1-0.6       -                -
                                                                                                                                     3.0

     25        0.0-0.1               -
                                                0.1-1.0      1.0-1.5        1.5-TO           -          -                -
                                                                                                                                     3.0


     26        0.0-0.1               -
                                                0.1-1.5          -
                                                                            1.5-3.5          -          -
                                                                                                                      3.5-TO        3.67

     27        0.0-0.1               -
                                                0.1-1.0          -
                                                                            1.0-10.1         -          -
                                                                                                                     10.1-TO       11.735

     28        0.0-0.1               -
                                                0.1-0.6      0.6-2.5        2.5-12.4         -          -
                                                                                                                     12.4-TO       13.25

     29        0.0-0.1               -
                                                0.1-0.7      0.7-2.1        2.1-6.6          -          -
                                                                                                                      6.6-TO         7.4

     30        0.0-0.1               -
                                                0.1-0.3      0.3-0.8        0.8-TO           -          -                -
                                                                                                                                     3.0

     31        0.0-0.1               -
                                                0.1-0.5      0.5-1.1        1.1-2.4          -          -
                                                                                                                      2.4-TO        2.45

     32        0.0-0.1               -
                                                0.1-0.4      0.4-1.1        1.1-TO           -          -                -
                                                                                                                                     3.0



NOTES:

a)          All depths measured in metres below ground level at the time of the investigation.

b)          TD = Termination Depth


Standpipes were installed in several boreholes. Standing water levels as at 20 June 2012 were as follows;

                                          Location                                Depth
                                              BH4                                   0.5m
                                              BH15                                  0.5m

                                              BH24                                  0.5m

                                              BH25                                0.17m

                                              BH31                                  0.9m




4.2        Laboratory Test Results

A summary of laboratory test results is provided in the Tables 2 and 3 below.


Table 2: Classification Test Results

                           Particle Size Distribution, Atterberg Limits, Linear Shrinkage,

                                                 Moisture Content

     Bore      Depth (m)       % Sand &       % Clay &          Moisture               Liquid Limit         Plasticity
     No                          Gravel         Silt          Content (%)                  (%)              Index (%)

      2          0.3-0.4           84            16                  16.3                  18                   1

      8          0.1-0.2           58            42                  20.6                  22                   5

      10         0.7-0.8           57            43                  18.8                  31                   14

      12         0.8-1.1           50            50                  32.5                  54                   34



Prepared for Cardno (Old)                                                                                                      Page 11


[OCR of page images]
Noosa on Weyba

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

BH | RootZone/ | Silty/Clayey Sandy/Silty Clay Clayey/Silty Sand xw TD
No Topsoll oe Softto | Stiff | Very | Loose | Medium | Mudstone
Firm Stiff or Dense
Better
18 0.0-0.1 - 0.1-0.8 0.8-1.4 1.4-TD - - - 3.0
19 0.0-0.1 - 0.1-0.2 0.3-2.0 2.0-TD - - - 3.0
20 0.0-0.1 - - - 1.7-TD 0.1-1.4 1.4-1.7 - 3.0
21 0.0-0.1 - 0.1-0.3 1.0-1.5 1.5-TD 0.3-1.0 - - 6.0
22 0.0-0.1 - 0.1-0.5 0.5-0.9 0.9-TD - - - 3.0
23 0.0-0.1 - - 0.8-1.3 1.3-TD 0.1-0.8 - - 3.0
24 0.0-0.1 - - 0.6-1.2 1.2-TD 0.1-0.6 - - 3.0
25 0.0-0.1 - 0.1-1.0 1.0-1.5 1.5-TD - - - 3.0
26 0.0-0.1 - 0.1-1.5 - 1.5-3.5 - - 3.5-TD 3.67
27 0.0-0.1 - 0.1-1.0 - 1.0-10.1 - - 10.1-TD 11.735
28 0.0-0.1 - 0.1-0.6 0.6-2.5 | 2.5-12.4 - - 12.4-TD 13.25
29 0.0-0.1 - 0.1-0.7 0.7-2.1 2.1-6.6 - - 6.6-TD 74
30 0.0-0.1 - 0.1-0.3 0.3-0.8 0.8-TD - - - 3.0
31 0.0-0.1 - 0.1-0.5 0.5-1.1 1.1-2.4 - - 2.4-TD 2.45
32 0.0-0.1 - 0.1-0.4 0.4-1.1 1.1-TD - - - 3.0
NOTES:
a) All depths measured in metres below ground level at the time of the investigation.

b) TD = Termination Depth

Standpipes were installed in several boreholes. Standing water levels as at 20 June 2012 were as follows;

 

 

 

 

 

 

Location Depth
BH4 0.5m
BH15 0.5m
BH24 0.5m
BH25 0.17m
BH31 0.9m

 

 

 

 

4.2 Laboratory Test Results
A summary of laboratory test results is provided in the Tables 2 and 3 below.

Table 2: Classification Test Results

Particle Size Distribution, Atterberg Limits, Linear Shrinkage,

Moisture Content

 

 

 

 

 

Bore Depth (m) % Sand & % Clay & Moisture Liquid Limit Plasticity
No Gravel Silt Content (%) (%) Index (%)
2 0.3-0.4 84 16 16.3 18 1
8 0.1-0.2 58 42 20.6 22 5
10 0.7-0.8 57 43 18.8 31 14
12 0.8-1.1 50 50 32.5 54 34

 

 

 

 

 

 

 

 

 

Prepared for Cardno (Qld) Page 11

Used in these records

About this file

File size
49.3 MB (very large file)
File type
PDF

No other editions are linked here.

Original file

Log in to download the original file

Part 6 of 37 Appendix 3 - Geotechnical Assessment MCU12_0208.pdf · 49.3 MB (very large file)

The download may take a few minutes. On mobile data, it is best to wait for Wi-Fi.

The supporting record

Open full page ↗

Source document

Analyse documents ↗Open full page ↗

My Comparisons

Choose two to four records of the same kind. Drag using a handle or use the “Compare” buttons.

Your selected records are saved in this browser for your account. Results use the filters on the page where you choose “Compare selected”.