Council archive · source document
Referenced Document - MCU13/0106
Very large file (16.3 MB): the original may take a few minutes to open or download. The page text below is quick to read.
MR ANDREW AITKEN
Slope Stability Assessment
Lot 9 (#18)Troplcana Rise, Castaways Beach
Job: ME13-018 Date: May 2013
MORRISON
GEOTECHNIC
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalFull text of the other 30 pages
Page 2
.BRISBANE .GOLD COAST .CABOOLTURE .SUNSHINE COAST
Unit 1 / 35 Limestone Street Unit 5/ 36 Lawrence Drive Unit 3/42 Aerodrome Road Unit 4/81 ’Msas Road
Darra Old 4076 Nerang Old 4211 Caboolture Old 4510 MaroocllydOre Old 4558
PO Box 3063 PO Box 2011
Darra Old 4076 Nerang Old 4211 MORRISON
P: 07 3279 0900 P: 07 5596 1599 P: 07 5499 0755 P: 07 5443 9522 GEOTECHNIC
F: 07 32790955 F: 07 5527 2027 F: 07 5428 2498 F: 07 5479 1633
ABN 51 009 878 899
brlsbanelab(!lmorrlsongeo.com.au [email protected] [email protected] [email protected]
RPEU02241
www.morrlsongeo.com.au
Maroochydore Office
Email: [email protected]
Job No: ME13-018
Ref No: 01273
Author: M Rubinic and 0Riley
27th May 2013
Mr Andrew Aitken
8 Coconut Grove,
Castaways Beach, QLD 4567
ATTENTION MR ANDREW AITKEN
Email: [email protected]
Dear Sir
RE: REVISION OF EXISTING SLOPE STABILITY ASSESSMENT TO REFLECT CURRENT
BUILDING DESIGN
LOT 9 No. is TROPICANA RISE, CASTAWAYS BEACH
1.0 INTRODUCTION
This report has been prepared to address the suitability of Lot 9 NO.18 Tropicana Rise,
Castaways Beach (the Site) for a proposed residential development with respect to slope
stability. The aim of this investigation is to assess the stability of the site in its present
condition and provide advice for the planning and design of the proposed residential
development. The assessment also includes the impact that the proposed development will
have on the stability of the site and nearby premises and provides maintenance and other
management practices to assist with ensuring the long term stability of the subject site.
The slope stability assessment methodology adopted for this study generally follows the
guidelines presented in the Australian Geomechanics Society "Landslide Risk management
Concept and Guidelines" Vol 35 No 1 March 2000 pp 51-92 which is in accordance with the
Queensland Government’s State Planning Policy 1/03.
Site borehole information was obtained from the supplied Geotechnical Soil Investigation
Report carried out by Design Engineers Queensland pty Ltd (DEQ). Their report (Job No.
12.2452 dated 07/09/2012 refers). It should be noted that Morrison Geotechnic assumes no
responsibility for the accuracy of the subsurface conditions described in the DEQ report.
Page 3
2
Job No. ME13/018
This assessment was requested and authorized by Mr Andrew Aitken (herein referred to as
the Client) by email dated 14th May, 12013.
2.0 METHODOLOGY
A desktop study involving perusal of the supplied soil test report (DEQJob No. 12.2452 dated
07/09/2012), published geological data, Client supplied contour plans and preliminary concept
plans of the development was initially carried out. This was followed by a walkover survey of
the Site by a Geoscientist from our Maroochydore Office on 10th January 2013. This involved
mapping and measuring features of significance to slope stability such as existing slope
gradients, slope direction, erosion features, surface and subsurface drainage, vegetation
density and the presence of irregular surface features which may be associated with
instability.
From the results of the walkover survey and information obtained from the existing Soil Test
Report, assessments were made of the stability of the steepest sloping ground surface at the
site, (central eastern portion). This assessment does not take into account the presence of
vegetation, which would be having a significant positive effect on the stability of the slopes.
The Site Survey plan is attached in Appendix A.
The Preliminary Design Concept of the dwelling is attached in Appendix B.
The DEQ Soil Test Report is attached in Appendix C.
Examples of Good and Poor Hillside Practice and Guidelines for Hillside Engineering are
presented in Appendix D.
3.0 RESULTS
3.1 Desktop Study (Regional Geology and Soil Profile)
Published data from "Department of Mines and Energy, Gympie Special Sheet 9445, Part
9545 First edition 1999" describes the basement geology of the location as Quaternary
Dunes, mainly parabolic and comprising windblown (aeolian)quartz sand.
Borehole data contained in DEQ Soil Test Report describes the subsurface geology at two
borehole locations (BH1 and BH2) to the borehole termination depths of 3.0m and 1.5m
respectively as follows:-
BH1:
00 3000
- NATURAL
SILTY SAND
LT-GREY,
J/MOIST, LOOSE TO MEDIUM DENSE
BH2:
000 -
1000 NATURAL
SILTY SAND
LT-GREY,
J/MOIST, LOOSE.
1000 -1500 SILTY SAND
LT-GREY
J/MOIST, LOOSE TO M-DENSE
Ref 01273 -
Mr Andrew Aitken
Lot 9 No. 18 Tropicana Rise, Castaways Beach. MORRISON GEOTECHNIC
Page 4
3
Job No. ME13/018
The subsurface soils encountered in the boreholes drilled at this site by QST are considered
to reflect the published geology data with loose and loose to medium dense silty sand being
observed in both boreholes to the termination depths.
3.2 Site Observations
Located on the eastern side of Tropicana Rise, the site is orientated in an east to west
lineation and is characterised by sloping topography which slopes down to the east at varying
grades of between 10 degrees and 15 degrees on the western portion of the site, steepening
in grade to approximately 20 degrees to 25 degrees for the remainder of the site. Locally
steeper portions of the site, approaching 30 degrees, exist near the central eastern portion of
the site (Photo 3.2A refers). Total relief across the site is approximately 10.0m (RL 24.5m to
RL 14.5m) with a relief across the proposed building footprint of approximately 5.5m (RL
24.1 m to RL 23.5m).
At the time of the investigation the ground surface was generally well vegetated by a dense
covering of knee to waist high grasses and shrubs that provide considerable additional
stability to the sloping terrain. Several typical coastal heath type mature trees and bushes up
to a maximum estimated height of 6.0m were also present at the site with evidence of past
clearing activities in the form of several short tree stumps with a maximum diameter of
approximately 200mm also evident across the site. The ground surface was for the most part
completely covered across the entire site with the exception of few narrow bare earth tracks
traversing the site as ungazetted walking tracks (Photo 3.28 refers).
Ref 01273 Mr Andrew Aitken
-
Lot 9 No. 18 Tropicana Rise, Castaways Beach. MORRISON GEOTECHNIC
Page 5
4
Job No. ME13/018
Photo 3.28: Looking east-southeast from the central western portion of the site.
The Site is assessed to be well drained with a planar to concave drainage profile directing
surface water towards the eastern boundary of the Site and David Low Way with no obvious
erosion features noted. Drainage of the limited upslope rainfall catchment outside the
boundaries of this site is managed by kerb and channel drainage associated with Tropicana
Rise which aligns generally north south along the ridgeline of the parent sand dune. Locally,
there is no evidence of existing or recent land instability with regard to landslip or significant
erosion and construction of residential dwellings adjacent to the Site on similar land have
proceeded with no signs of existing or recent slope instability (Photo 3.2 C and 3.2 D refers).
Ref 01273 -
Mr Andrew Aitken
Lot 9 No. 18 Tropicana Rise, Castaways Beach. MORRISON GEOTECHNIC
Page 6
5
Job No. ME13/018
site.
Ref 01273 -
Mr Andrew Aitken
Lot 9 No. 18 Tropicana Rise, Castaways Beach. MORRISON GEOTECHNIC
Page 7
6
Job No. ME131018
4.0 BROAD ASSESSMENT OF EXISTING STABILITY AND LANDSLIDE HAZARD
RISK RATINGS
At the time of the investigation there were no significant erosion features noted and there was
no evidence of existing or recent past slope instability involving large movements of
significant quantities of soil in a short duration event such as a landslip or landslide at this
site. There is however the potential for some minor to moderate instability in the form or
erosion and slumping particularly during heavy rainfall events or high wind conditions if the
ground surface is stripped of the dense vegetation, particularly on the steeper central eastern
portion of the site.
Adopting the approximation FOS (Factor of Safety)= tan$/tane,where $ is the friction angle of
the surficial soils and e is the angle of the slope, the typical FOS values for shallow sliding of
the surface soils over the steeper slopes in the central eastern portion of the site where e is
typically 200 to 250 generally, but approaches 30 degrees locally, are assessed to be typically
1.2 to 1.5, but locally about 1.1, corresponding to near limiting equilibrium and being less than
1.5, which is usually considered to be the minimum design target value. The dense vegetation
provides additional support for the steeper sections, whereby removal of this vegetation will
most probably result in instability within the loose surficial sands in the form of erosion, slips,
creep or slumping, especially after rainfall. On this basis, the long term stability for the site is
contingent upon the recommendations presented in this report and the Guidelines for Hillside
Engineering being strictly followed. On the western parts of the Site, where slopes are flatter,
generally ranging between 10 degrees and 15 degrees, the FOS values are in excess of 2,
which reflects stable conditions.
On this basis and governed by the steeper eastern portions of this site, the likelihood of
instability in the form of minor to moderate erosion, creep and/or slumping after the removal of
vegetation, is considered to be "Likely" meaning that an event will probably occur under
adverse conditions over the design life of the project with an indicative annual probability of
10-2.
The consequence of this instability at the site is assessed to be "Minor" meaning that in the
event of soil instability, limited damage to part of a structure, or part of the site requiring some
reinstatement stabilization works.
On this basis, the risk to property can be assessed as "Moderate" under present conditions.
This level of risk is Tolerable and usually accepted provided a treatment plan is implemented
to maintain or reduce the risk to "Low". If the recommendations outlined in Section 5.0 to
Section 7.0 of this report are followed, the risk level to property reduces to Low which is
usually accepted.
5.0 IMPACTS OF PROPOSED DEVELOPMENT ON SITE AND NEARBY PROPERTIES
5.1 General
On the basis of Client supplied data, it is understood that the proposed development is to
consist of a two storey split level, residential dwelling and garage. It is understood that the
building will be supported on screw piles as per the recommendations given in the DEQ Soil
Test Report or on stiffened rafts with edge and internal ground beams. Cut and fill earthworks
will be required to manage the relief across the building envelope for on grade construction of
the entry level floor, first floor and ground floor.
Ref 01273 -
Mr Andrew Aitken
Lot 9 No. 18 Tropicana Rise, Castaways Beach. MORRISON GEOTECHNIC
Page 8
7
Job No. ME13/018
Cuts supported by retaining walls will range up to about 2.0m beneath the house to form the
ground floor level at about RL 19.0m and about 1.0m for the front entry floor at approximately
RL22.6m.
Establishing adequately designed, constructed and maintained surface and subsurface
drainage as well as adopting suitable footing systems founding in competent subsurface
materials at depth is critical to the long term performance of the site in terms of slope stability.
Disturbance or removal of the dense vegetation from the steeper portions of this site can
cause instability in the form of slips, slumping, erosion and creep movements as this
vegetation provides additional support to the slopes. Where appropriate, natural vegetation
must be retained and cleared areas must be kept small and immediately revegetated after
construction where appropriate, to minimize the potential for instability and future erosion.
Suitable footing systems, founding within medium dense sandy soil at depth, will also
minimize the potential for stability problems within and around the building footprint. The
proposed development is not expected to impact on the stability of the Site or neighboring
property and infrastructure if the recommendations presented within this report are followed.
5.2 Excavations
An entry floor pad level of RL 22.6m is proposed which will require a maximum cut of
approximately 1.0m in the south west corner of the building pad.
Cut earthworks will also be required for construction of the ground floor pad at RL 19.0m.
Maximum cut depth is estimated at about 2.0m. Supplied design drawings indicate support of
the cuts using reinforced masonry walls. Batter angles approaching 30 degrees in
unvegetated sandy soils for cuts and fills at this site are considered inappropriate as a long
Battered slopes, particularly unvegetated battered slopes at this
term soil stability solution.
site, should be no steeper than 22 degrees or 2.5(H): 1 (V) and revegetated or protected
against erosion (eg erosion protection matting) as soon as practical to provide long term
slope stability.
Limited information was made available regarding the existing development to the south of
the site which comprises a concrete split level residence. With the proposed buffer zone
between the neighboring dwelling and proposed excavation for the ground floor on this site
approaching 2.0m, the southern face of the excavation may require the construction of a
retaining structure to prevent potential undermining of neighboring structures, including the
boundary walls, or neighboring soil loss in the event of a landslip. The adopted system may
require consideration of the loads from the footings and walls of adjacent structures, which
are immediately adjacent to or on the south boundary. The footing types, founding depths
and loads of footings supporting the adjacent buildings are not known. A suitable temporary
retaining system for the ground floor slab should be configured to enable the ground surface
behind the temporary structure to be left undisturbed whilst construction of the permanent
retaining system takes place in front of the wall. After construction, the void space between
the two walls is filled using engineered fill compacted to 95% SMDD or not less than 70%
Density Index and revegetated as soon as possible. The temporary retaining wall is then
removed or it can remain in place.
A suitable temporary retaining structure may comprise:
. Post and panel wall construction
. Driven sheet piles
The neighboring site to the north is undeveloped. Cut excavations to approximately 1.0m for
the proposed new development will encroach within 0.5m to 1.0m of the neighboring
boundary. Due to short buffer distance between the excavation face and the neighboring
boundary, temporary soil retention using a physical structure is encouraged to prevent
potential soil loss on the neighboring property, alternatively the construction of the proposed
permanent retaining wall using a "hit and miss" sequence could be considered whereby:
Ref 01273 - Mr Andrew Aitken
Lot 9 No. 18 Tropicana Rise, Castaways Beach. MORRISON GEOTECHNIC
Page 9
8
Job No. ME13/018
.
post holes are drilled at appropriate centers along the alignment of the wall to socket
below the proposed excavation base (in accordance with detailed design)
. Install and secure (concrete) the post into the drilled holes extending up to final
ground surface.
. Excavate vertically between posts in a "hit and miss" sequence, installing panels
between posts before moving on to the next section.
The buffer zone between the proposed development and the east and west boundaries of the
site are considered adequate to provide minimal risk to upslope and downslope infrastructure
in the event of a short duration event such as a surficial landslip. Here excavations can
proceed unsupported at a maximum slope of 30 degrees with erosion matting being fixed
over the cut surface for the duration of construction. Some minor surficial instability can be
expected, particularly after rainfall but this will be contained within the development envelope
and be of nuisance value rather than a risk to personnel and equipment. Rapid construction
of the retaining walls after cutting and staggering of the construction Le. where a sensible
portion of the cut is excavated (eg. 5m section) and wall installed prior to moving on to the
next section of cut is encouraged. Any fill placed behind retaining walls must be engineered
structural fill compacted to 95% SMDD or not less than 70% Density index.
6.0 RECOMMENDATIONS TO REDUCE HAZARD RATING
The following risk reduction strategies, in conjunction with the general Guidelines for
Development described in Section 7.0 below, must be followed to reduce the risk level
implication posed to the residential development to a Low level of risk level:
Natural vegetation must be retained wherever practicable and cleared areas must
be kept small and immediately revegetated to minimize the potential for instability
and future erosion.
. All excavations exceeding 1.0m or greater than 20 degrees must be supported by
adequately engineered retaining walls or battered at appropriate angles. Retaining
walls must be designed for a long term factor of safety of at least 1.5 and
constructed as soon as possible after cut or fill operation. Any fill placed behind
retaining walls must be engineered structural fill compacted to 95% SMDD or not
less than 70% Density index. Drainage must also be incorporated into the wall
design as well as behind the crest to intercept surface and subsurface water flows.
This surface water must be redirected into dedicated drainage areas.
.
Filling should be benched into the sloping ground surface and supported by
engineered retaining walls as needed. Fill batter slopes if appropriate should be no
steeper than 22 degrees or 2.5(H): 1 (V)and be over constructed and trimmed back
to ensure adequate compaction in the outer zones. Any placed fill should be
compacted to 95% SMDD or not less than 70% Density index and revegetated if
appropriate or protected against erosion immediately after construction. Fill heights
should be limited to less than 1.0m.
A surface drain system must be installed upslope of the proposed residence to
collect surface water flows from upslope areas. This water must then be discharged
into the stormwater system.
All lot runoff and roof water must be discharged into stormwater systems, not over
the ground surface. Alternatively roof water can be discharged into water tanks for
storage.
.
Slope sensitive residential design for the building must be adopted. Slope sensitive
residential design includes split level on-grade raft slabs, pole houses or framed
houses with suspended floors. It is understood that the house w be supported by
screw piers as recommended in the attached DEQ Soil Test Report.
Ref 01273 - Mr Andrew Aitken
Lot 9 No. 18 Tropicana Rise, Castaways Beach. MORRISON GEOTECHNIC
Page 10
9
Job No. ME13/018
All footings should found within medium dense sand, beneath the loose surficial
sand and below the expected zone of erosion by wind, rainfall and surface runoff.
Structural design should ensure stiffness in the down slope direction e.g. Strip
footings and internal beams aligned up and down the slope.
No structural development is to found within loose surficial soils, or shallower than
1.0m or on non structural or uncontrolled fill material.
6.0 GENERAL GUIDELINES FOR DEVELOPMENT
Sound hillside engineering practice is essential to the long term performance of the
development.
The proposed residential development must be designed, constructed and maintained in
accordance with the attached Guidelines for Hillside Construction and the development
examples shown on the attached Illustrations of Good and Poor Hillside practice. The more
significant requirements are summarized below:
. No cut or fill should be carried out unless approved by a suitably qualified
geotechnical engineer or engineering geologist. All fill should be constructed under
Level One Supervision as defined in AS 3798 2007 (Guidelines on Earthworks For
-
Commercial and Residential Developments)
. All storage tank overflow water must be piped to the nearest gully well down slope of
the proposed houses or into the stormwater system. Uncontrolled discharge to the
hill slope is not permitted.
. Storage tanks should be located down slope or to the side of the proposed house.
. No development should take place within any surface irregularities such as possible
slumped areas, washouts or erosion features. If development is to occur in these
areas, surface irregularities must be removed prior to development and drainage
improved.
If the recommendations outlined in Sections 5.0 to 7.0 are followed and implemented the risk
level implications for the risk posed to the property can be reduced to Low which is a tolerable
level of risk.
Ref 01273 - Mr Andrew Aitken
Lot 9 No. 18 Tropicana Rise, Castaways Beach. MORRISON GEOTECHNIC
Page 11
10
Job No. ME13/018
7.0 LIMITS OF INVESTIGATION
This Report has been prepared by Morrison Geotechnic pty Ltd (Morrison Geotechnic), and
may include contributions from Morrison Geotechnic’s officers and employees, sub-
contractors, sub-consultants or agents (Contributors).
This Report is for the sole benefit and use of Andrew Aitken (Client)for the sole purpose of
providing geotechnical advice and recommendations in respect of the proposed residential
development at Lot 9 No. 19 Tropicana Rise, Castaways beach.
The Report is only intended to addresses those issues expressly described in the scope of
work in the Proposal Letter and this Report.
This Report should not be used or relied upon for any other purpose without Morrison
Geotechnic’s prior written consent. Morrison Geotechnic and the Contributors do not accept
any responsibility or liability in any way whatsoever for the use or reliance of this Report by
has
anyone other than the Client or by anyone for any purpose other than that for which it
been prepared.
Except with Morrison Geotechnic’s prior written consent, this Report may not be:
(a) released to any other party, whether in whole or in part (other than to the Client’s
officers, employees and advisers);
(b) used or relied upon by any other party; or
(c) filed with any Governmental agency or other person or quoted or referred to in any
public document.
Morrison Geotechnic and the Contributors, do not accept any liability or responsibility
whatsoever for, or in respect of, any use or reliance upon this Report by any third party.
Morrison Geotechnic is not obliged to enter into discussions with any third party in respect of
this Report.
The information (including technical information and information obtained through
discussions) on which this report is based has been provided by the Client and third parties.
Morrison Geotechnic and the Contributors:
(a) have relied upon and presumed the accuracy of this information;
(b) have not verified the accuracy or reliability of this information (other than as expressly
stated in this Report);
(c) have not made any independent investigations or enquiries in respect of those
matters of which it has no actual knowledge at the time of giving this Report to the
Client; and
(d) make no warranty or guarantee, expressed or implied, as to the accuracy or reliability
of this information.
Morrison Geotechnic and the Contributors do not accept responsibility or liability for any
incorrect assumptions related to this Report. For the avoidance of doubt, this Report:
(a) cannot predict the ground conditions encountered at any untested location because
the ground conditions surrounding a test sampling location (or between any two test
sampling locations) may be different from the test samples we have obtained;
(b) is not an environmental, contamination or hazardous materials assessment; may be
invalid, incomplete or inaccurate (including errors in the scope of work, investigation
methodology, observations, opinions and advice) where the information provided to
Morrison Geotechnic was invalid, incomplete or inaccurate;
Ref 01273 - Mr Andrew Aitken
Lot 9 No. 18 Tropicana Rise, Castaways Beach. MORRISON GEOTECHNIC
Page 12
11
Job No. ME13/018
(c) is limited to observations of those parts of the site that were accessible at the time of
the field investigation and is not based on observations about areas of the site which
were inaccessible to the investigation equipment (including slopes, heavily vegetated
areas or service corridors);
(d) is not a comprehensive representation of the actual site conditions and may only
show a reasonable interpretation of conditions encountered at discrete test locations
along with general site observations; and
No warranty or guarantee, whether express or implied, is made in respect of the geotechnical
data, information, advice, opinions and recommendations present in this Report.
In recognition of the limited use to be made by the Client of this Report, the Client agrees that,
to the maximum extent permitted by law, Morrison Geotechnic and the Contributors shall not
be liable for losses, claims, costs, expenses, damages (whether in statute, in contract or
any
tort for negligence or otherwise) suffered or incurred by the Client or any third party as a result
of or in connection with the information, findings, opinions, estimates, recommendations and
conclusions provided in the course of this Report.
If further information becomes available, or additional assumptions need to be made,
Morrison Geotechnic reserves its right to amend this Report
Yours faithfully
M D RILEY (RPEQ5641)
for and on behalf of
MORRISON GEOTECHNIC PTY LIMITED
Encl. Appendix A Site Survey plan
-
Appendix B Design Concept
-
Appendix C DEQ Soil Test Report
-
Appendix D Examples of Good and Poor Hillside Practice and Guidelines for Hillside
-
Engineering
Ref 01273 -
Mr Andrew Aitken
lot 9 No. 18 Tropicana Rise, Castaways Beach. MORRISON GEOTECHNIC
Page 13
APPENDIX A Site Survey [OCR of page images] APPENDIX A Site Survey
Page 14
10
MCH5387
I ~I
CL CL.
:r:: :r::
Vacant Lot o 0 rl~~Dn
r
VJ
... Sewer
Teltnl and Underground ectricol (J)
9001 (J)
Lid RL
Plotted from Records CL
Screw in kerb / PROJECT
. :r::
RL24-493
0 Proposed New Residence
~
+
~11\
~O
a..
:r::
0 0
CL
:r::
CASTAWAYS BEACH
CLIENT
Mr & Mrs Aitken
18 Tropicana Rise,
TITLE
, Site Plan
l.
l
CL DATE
:r:
0 April, 2013
DRAWN
a.. a..
::r: ::r: SlR
0 0 Overhead Electricity
SCALE
"\’It Sa9 levels
’0 "-’ +.ee9-
r!;
’It ~ o(
~ DRWGNo.
X
._._’1,; 13AJA01
ISSUE
Preliminary
;’1’1/)" P;on- 1’,"" ~
" V. .a
i
’lX’ Contractor to verify all
V)
~l;’t~ .J\’
t. Fe ~
((/~ 1>-
~
t
Je, ’"
~ ~
\
.~ ~ dimensions on site prior to
Commencing work
"
l
"
f)<’ ~
\’)~, I
! ’\ (co
’1-:>’l:?J)
"
..
"3k’t
~L
r’rv’,125:’()
0(\ +fl 21.8 1’2~-S6 277"44’10"
~ Use fIgUred dimensions in
preference to scaling
--~~Of
,
;’8,16 J1.2/l
I
-_
- 0, cr.,
,;n!’
-
;’ ~ These drawings to be read
In conjooction with the
Engineering details
-
~I
-
’"
o 0) >-~_v_, -
E’
--f ,~:_, ’))
.:;/ ’1 o
~ if? rt%-)
’1
I
I--
....,
Copyright Designright
~
~ ’~ Concrete Split Level
~ I~
Residence
-I
.?818 8 ~
O~ MCH5387 0::0 S
~ .:z::::r::r
\J"t:rt)
I , I
~
Page 15
APPENDIX B Preliminary Design Concept [OCR of page images] APPENDIX B Preliminary Design Concept
Page 16
II~~D~
.
PROPOSED NEW RESIDENCE
MR & MRS AITKEN
(LOT9)18 TROPICANA RISE
CASTAWAYS BEACH OLD 4567
I ’
,_
;, ’
.J
;f
../
_
,.~
J
,_’.~..l
:7tI~r
,
,’.. ~ .
1-" .f;~
i" ,1’).’. ~.
_
,/,lY
’
r
-\;...,noo;
~_
"
_O
~
""--. ’~’:’ 4"
1,.......V"1",
..
[OCR of page images]
PROPOSED NEW RESIDENCE
MR & MRS AITKEN
(LOT 9) 18 TROPICANA RISE
CASTAWAYS BEACH QLD 4567
riaaon
Page 17
.fiK"’7r~~
~ ~
r--
-1
I
I
I TITLE
,
l---
~et:: ,
,--I
I I
’.e>Jp
I DATE
~--_j
ApriI,2013
DRAWN
SLR
~
SCALE
_j ~,
~ +.<I
DRWGNo,
~ 13AJA02
INI~
I I I’t\..U..’ ~ 1:7 II ISSUE
Preliminary
-7
’-1’"
I \ /
I I’’’:’,’00’ "I
,:
. .
:,’,’, ’:
.
,,;’:.
I
~,~~
\/:~- ,:’. I
/\ I
I ~ ’7rWr"/’1Y ’: ’,’,’ ~~~~
1~_j~tAPr~ ---’~~
Copyrig I Oesn ghl
~
~~....~
II-
I
11
Page 18
.~~~
on
PROJECT
Residenoe
^1 CLIENT
r
I
TITLE
DATE
ApriI,2013
I DRAWN
I SlR
~ I SCALE
~~
~\.- 1’S’1~ ~
I
DRWGNo.
I 13AJA03
11
~
I ISSUE
II~ I II Preliminary
~’’’6’
-,-
R
L-IHE:- Of"~
~ I ~
I
J Copyrig Designright
S~<z.
Page 19
~~-{- FI~ C~y
~~?
.
~~LE.VA1t/’N
rl~~D.n
.
PROJECT
~*P
Proposed New Residence
CLIENT
t..-MN<PA.-- -2Z~_
’fi:.l, 2.1 ~G:.~ Fa>!.--- 1"~
.c,,1r; ~ Mr & Mrs Aitken
18 Tropicana Rise,
~~N~""’~
CASTAWAYS BEACH
.?~ ~~r;{%...
TITLE
---l- -+
~D~--
Elevations
\..E.-’-"eI" Rl- 14.q95
~~Pl~ DATE
CAI-m~~~.~ ApriI,2013
DRAWN
~~~
SLR
SCALE
.
~E-t.-e.VATl ~
~
~<Uj.,~ DRWGNo.
13AJA04
ISSUE
~~ Preliminary
u. Contractor to verify all
dimensions on sHe prior to
Commencing work
a-mz_y Use figured dimensions in
~’- Zz_. preference to scaling
1?7S
These drawings to be read
~vta-lE.Etz-. In conjunction with the
~~ Engineering deta s
r
Copyright Designright
~~et"<’~"’-XP .......--"l.v
C4l-lT1~ ~-c.~
~.
}
Page 20
.w~t=V6V~
11~~Dn
~~ ~~
~t:H!E-(~
PROJECT
Proposed New Residence
~1Zt>eJ\..--
CLIENT
Mr & Mrs Aitken
18 Tropicana Rise,
CASTAWAYS BEACH
t-It-re. Pf" !-1~
~6lN~ TITLE
t--I J_ ’..:_,
-11
Elevations
~~
r-7PF ~
-4- - __j;b.
1.-t~~~wAI..V
~.~
r....t-’EI-- \...1M" ~17~
DATE
~ ~t...NN l"N... ApriI,2013
l-I pP ~~ ’eNno/ ~
DRAWN
SLR
SCALE
.
EA-7\ t:LEV^TJ::::7N
~
~~aaz.w
~ 7~~’iED~.~~$ DRWGNo.
~ 13AJA05
ISSUE
Preliminary
L,__ 4- 4- T~Q~~
Contractor to verify aU
dimensions on site prior to
’..:’
. Commencing work
’. ~
. ’. ~"i
. :... ...:..;. ..
.’
Use figured dimensions in
preference to scaling
,t.__
These drawings to be read
In conjunction with the
Engineering details
Copyright Deslgnright
~t... ~-I-~
~~
~1~~~I’2--
~c+~~
Page 21
~ ~~~~~~
~ --===== ~
.
~.{.::::::N A -
A ~. l
rl~~Dn
~ ~
~
PROJECT
Proposed New Residence
CLIENT
l’4-
2’Z..I~ Mr & Mrs Aitken
18 Tropicana Rise.
CASTAWAYS BEACH
~t-l<!>-+UN"’1o<.
~t:I!W ~1:? Q-l?I~ TITLE
tet",6.l1",
Sections
~
~RL.
19."’}P.7 w~~ ~ DATE
.", 1z:> f"v.Ntaz..
R’’’’’’’~4-F-’Wt1~~~~ ~ April,2013
DRAWN
~"’16-
.
~(a.l -{7 ~’.’1!~..:’f1!" !:>I.P~~
..-
l"I-Y" ~1..1/’l1N&- ~~r~/<&r=f’" ~~ SLR
-
SCALE
8h,~ I-
l-~ -He&
-
DRWGNo.
13AJAOO
~
ISSUE
3>lSOo
Preliminary
Contractor to verify all
dimensions on site prior to
LJV\~ FL~ -Z2 Commencing work
t.e,.e._,. "’" .u.
tP7’> ~
Use figured dimensions in
~ preference to scaling
f’.._~.~-+~ These drawirrgs to be read
-I<<>~~~\,... In conjunction with the
~l"’L.<:z:fl.-~ Errgineering details
~L IS.",~
Copyright Oesignright
/"
I __.....-
__.....-
...-
./
~~""UHI!"~
I
/........-~~~ t.-ll-S
t ,..
Page 22
APPENDIXC DEQ Soil Test Report [OCR of page images] APPENDIX C DEQ Soil Test Report
Page 23
[J1)(l
Design Engineers Queensland
Consulting Engineers
Civil, Structural and Soil Testing
DEO. Consulting Ply Lid Va ABN 53 065 711 248
Job No- 12.2452
Address- LOT 9 (#18 TROPICANA RISE, CASTAWAYS BEACH
The following information is required by our office for the completion of foundation design under the
revised BSA policies. We will hold this job until information is received or advice otherwise is received.
Please return this sheet in addition to all required info, or reason why the info is not applicable to us.
Info received Not applicable
Y N (reason)
SOIL TESTING REQUIREMENTS
The property description and site address- .,/ 0
Contours survey- o .,/
Location of trees on-site and surrounds- .,/ 0
The footprint location of proposed building
with platform levels- o .,/
Location of proposed cut/fill o .,/
FOOTING DESIGN REQUIREMENTS
Proposed building Plan- o 0
Photographs of site- o 0
Location and identification of overland flow- o 0
Land search results (e.g underground service,
flood, easements, subdivisional fill,
vegetation protection)- o 0
Preferred footing system o 0
Means ofdiverting surface
water away from slab o 0
Location of articulation joint in masonry o 0
Site specific details (pool,Zero lot, ect.) o 0
If you have any questions about the revised policies and insurance arrangements that this information is
regarding to please contact the BSA directly. It is our understanding that under the new policy you may
not the covered by BSA insurance if the above information is not provided. It is the responsibility of the
builder to ensure all necessary information is provided to our office as well as to all relevant contractors.
NO.5 Parkview Street, Milton Qld 4064 Phone: (07)33670211 Fax: (07)33670205
ETnai/: soiltestin .
com.au
Page 24
Page 1
OUR REF: 12.2452
DATE: 7/09/2012 mO[!l
TO: CIVIC STEEL HOMES Design Engineers Queensland’
ORDERED BY: KIRSTEN Consulting Engineers
FROM: ROXANNE Civil, Structural and Soil Testing
DEQ Consultlng Ply Ltd Va ABH 53065 711248
ADDRESS: LOT 9(#18)TROPICANA RISE,
FOR CIVIC STEEL USE ONLY
CASTAWAYS BEACH
1. SITE CLASSIFICATION
S- Ys <20
Slightly Reactive 0 H2- Ys60-75
Vel)’ Highly Reactive D
M- Ys 20-40
Moderately Reactive D E- Ys>75
xframely Reactive D
H1- Ys 40- 60
Highly React/ve D P - Problem Site
(ReferBelow) 0
COMMENTS
. P:Due to the presence of low bearing strength in natural dune sands.
. Screw piers are recommended. 75kN working load for single storey, 100kN
working load for double storey.
. Trees within limits outlined in AS2870 were noted at the time ofthis soil test.
No influence to foundations likely.
. Note: Sewer service may exist on this lot.
--------------------------------------------------------------------------------------------------------------------
1. TIllS IS A PRELIMINARY SOIL INVESTIGATION COMMISSIONED BY CIVIC STEEL HOMES FOR TIffiIR
INTERNAL USE ONLY.TIllS REPORT IS FOR TIffiIR COSTING PURPOSES ONLY (NOTFOR DESIGN
PURPOSES).
2. ALLOWANCES SHOULD BE MADE FOR FLEXIBLE CONNECTIONS AND STAINLESS STEEL STRAPS
FOR H,E & P SITES TO COMPLY wrrn ARTICULATED PLUMBING REQUIREMENTS PARTICULARY IN
THE IPSWICH CITY COUNCIL AREA REFER PLUMBER FOR SCOPE OF WORK.
3. 1HE FOLLOWING FOOTING & SLAB PIERING REQUIREMENTS APPLY WHEN ALL NEW FILL PLACED
TO CREATE A LEVEL BUILDING PLATFORM IS COMPACTED IN ACCORDANCE Willi AS.3798 2007
TYPE 2 SMALL SCALE OPERATIONS TABEL 8.1 AND TESTED IN ACCORDANCE Willi AS.1289
4. ALLOWANCES SHOULD BE MADE FOR PIERS TO FOOTINGS ADJACENT TO FILLED RETAINING
WALLS,CANAL EMBANKMENfS,UNDERGROUND SERVICES,POOLS ETC.
No.5 Parkview Street, Milton Qld 4064 Phone: (07)3367 0211 Fax: (07)33670205
Emai/: soiltestin
Page 25
Page 2
OUR REF:
ADDRESS:
12.2452
LOT 9(#18)TROPICANA
RISE, CASTAWAYS BEACH
ml)C!l
Design Engineers Queensland
Consulting Engineers
Civil, Structural and Soil Testing
DEC Coosuttlno Ply LId Va ABN 53065 711 248
2. IS EXISTING FILL PRESENT ? DYes 0No
IS EXISTING FILL> 400mm IN DEPTH DYes oNo Refer Comments above
-
to
DOES FILL APPEAR SUITABLE FOR DYes oNo Refer Pier Requirements below
-
RE-COMPACTION
3. ARE FOOTING PIERS REQUIRED? 0Yes DNo
oSCREW P RS ARE REQUIRED (SEECOMMENTS)
oP RS ARE REQUIRED THROUGH PAD FILL INTO FIRM EXISTING FILL.
oP RS ARE REQUIRED THROUGH ALL FILL AND NATURAL SOILS INTO WEATHERED ROCK.
4. ARE SLAB PIERS REQUIRED? oYes DNo
oSCREWP RS ARE REQUIRED (SEECOMMENTS)
oP RS ARE REQUIRED THROUGH PAD FILL INTO FIRM EXISTING FILL.
D P RS ARE REQUIRED THROUGH ALL FILL AND NATURAL SOILS INTO WEATHERED ROCK.
s. TREES OF POTENTIAL FOUNDATION INFLUENCE -
See Comments
DN/A oNOTED ON SITE G NOTED ON ADJACENT SITE
TO REMAIN, AN EXPERT ARBORIST SHOULD BE COMMISIONED TO
D IF EXISTING TREES AREROOT BARRRS OR OTHER PHYSICAL METHODS ARE REQUIRED
ASCERTAIN WHETHER
6. WIND CLASSIFICATION
DN2(W33N) 0N3(W41N) DN4(WsON)
No.5 Parkview Street, Milton Qld 4064 Phone: (07)33670211 Fax: (07)33670205
Email: soiltestin.com.au
Page 26
Page 1
SITE PHOTOGRAPHS
OUR REF: 12.2452
DATE: 6/09/2012
mom
Consulting Engineers
ADDRESS: LOT 9(#18)TROPlCANA
Civil, Structural and Soil Testing
RISE, CASTAWAYS BEACH MKR Ply Lid Va ABN 53065 711 248
NO.5 Parkview Street, Milton Qld 4064 Phone: (07)33670211 Fax: (07)33670205
Email: soiltestine.com.au
Page 27
BORE LOGS
PENETROMETER (O.c.P) OO~r:;.;
oO~r.r; :t: .o:~:
’,.,..
"
No. OF BLOWS HOLE 1 HOLE 2 .:~
"
’;il~,.f
[’:" .,’ ~y :’-j:
00 200 1 1
- .
:’;l
::~ .’\
SITE SKETCH (N.T.S’)
200 400 2 2
.
,
:.~.I.:;’:
-
;~ ~..., C" .~:.
~! ’,’.
400 - 600 3 2 t: t~’ ....: :’:’
APPROX.
’,:: .,~. MAlllRAL LINE
600 - 800 3
3
2
2
:r~~ ~~ f~ SILTY SAND SE~ER
800 1000 ~t::t LT r ,
t"; ~<’
-
---
;_;. t.; :’: -GREY, --
- -
1000 1200 3 3 ,
-
.:. "0 ~...r,,’ J/MOIST, LOOSE.
." ~. "", .
1200 - 1400 .:’’’c
..:’ ;:’
~s. r. W
1400 - 1600 ’.~ ....:
~’., ...... ’:’ ~: 0 0
1600 - 1800
~~ .\:
’" ’"
1000~~
~"".
\ \2uti. BH 2
1800 2000
;... :.~
~
-
’:~ .~. ._. II
2000 2200 I.~
:.. .
.
,.J ....
-v
SILTY SAND
o
-
~.~ .... ~.
:..;; ’" OCP 3
2200 2400 ~: .:-: LT-GREY,
-
:.~
to’
. .
41 . .
2400 -
2600
’.
~’.~ .:! J/MOIST, LOOSE TO M-DENSE. OCP 2
I
:~:.: HAlllRAL ~~ :olio . >-
2600 -
2800 .~, ~, SILTY SAND ....h.
~:’ ’t\ LT -GREY, 1500L,;J8
2800 - 3000
....
"
"
...
....: J/MOIST, LOOSE TO Ii-DENSE.
BOREHOLE 2
EMQ QE HAND AU~EB 0 J
PENETROMETER ID.C.PJ
...~ .~
~..’: .....:
;~
~~ ...’. .<
,.
t
0/8
0
B~ 2m
V
No. OF BLOWS HOLE 3 HOLE 4 "
,,\r
,,’
00
200
-
200
400
1
2
{,
II
..
.,’ ..’
;.. ::?
"
.
’---
~1 ~.~ Z
7\
-
........":
400 - 600 3 ~~; TROPICANA RISE
600 - 800 2 ~ .:~
., ..
800 - 1000 2 ~." :.;
I~’I :~.
1000 - 1200 3
.’.~ ".
IIlUo. TREES WITHIN LIMITS OUTLINED IN AS2870
"
..
1200 - 1400 .\
.
.
:.
.
i..i ’1 WERE NOTED AT THE TIME OF THIS SOIL TEST.
1400 - 1600
NO INFLUENCE TO FOUNDATIONS LIKELY.
1600 - 1800 ~:.,’ .:.~:
’I
1800 - 2000 ~:;’
;’i:
2000 - 2200 ’4" .:
2200 - 2400
.....:...:
3000"::’ ~ BORE TERMINATED I ESTIMATED Ys (mm) I <20 I
2400 2600
BOREHOLE 1
-
2600 - 2800
SCALE N.T.S DATE
2800 - 3000 5 Parkvlaw Street SOIL TEST RESULTS
D I)[] Milton Qld. 4064
P: (07) 3367 0211
DRAWN RL 06/09/12
F: 107) 3367 0205 LOT 9 (#18) TROPICANA RISE 12.2452 G01
NOTE: Consulting Engineers E: structuralctdeq.com.au
JOB No. DRG. No.
ALL DIMENSIONS SHOWN CIvIl, Structural arxI Soil Testing E: c!vilctdeq,com.au CASTAWAYS BEACH
ARE APPROXIWATE ONLY. E: solltestlngctdeq.com.au CHECKED SHEET 1 OF 1
I)(Q C..trt Ply Lid 1/. AlII 53 "5 711 2"
[OCR of page images]
q BYE tvs >
PENETROMETER (D.C.P) BORE LOGS _
No. OF BLOWS| HOLE 1 | HOLE 2
00 - 200 1 1
200 - 400 2 2
400 - 600 3 2
600 - 800 3 2
3 2
3 3
SITE SKETCH _(N.T.S.)
APPROX.
SEWER LINE
800 - 1000
1000 - 1200
1200 - 1400
1400 - 1600
1600 - 1800
1800 - 2000
2000 - 2200
2200 - 2400
2400 - 2600
2600 - 2800
2800 - 3000
PENETROMETER (D.C.P)
No. OF BLOWS] HOLE 3 | HOLE 4
00 - 200 1
200 - 400 2
400 - 600 3
600 - 800 2
2
3
T-GREY,
/ MOIST, LOOSE.
1000}
ESSILTY SAND
4LT-GREY,
/MOIST, LOOSE TO M-DENSE.
egg Lutes
900
BOREHOLE 2
LT-GREY,
J/MOIST, LOOSE TO M-DENSE.
TROPICANA RISE
800 - 1000
1000 - 1200
1200 - 1400
1400 - 1600
1600 - 1800
1800 - 2000
2000 - 2200
2200 - 2400 ety
2400 - 2600 3000~~™ BORE TERMINATED ESTIMATED Ys (mm) <20
BOREHOLE 1
2600 - 2800 ee
WERE NOTED AT THE TIME OF THIS SOIL TEST.
NO INFLUENCE TO FOUNDATIONS LIKELY.
\
c
NOTE: TREES WITHIN LIMITS OUTLINED IN “at
cr
2800 - 3000 arkview Stree SCALE N.T.S DATE
DOGO wee |f sm usrasuis | fete honor
NOTE: Consulting Engineers —_-F (071 3367 0205 LOT 9 (#18) TROPICANA RISE 12.2452 G01
ALL DIMENSIONS SHOWN Civil, Structural and Soil Testing tan CASTAWAYS BEACH JOB No. DRG. No.
DEO Consulting Ply Lid t/e ABN 53 065 7H 248 Es [email protected] | CHECKED SHEET 1 OF 1
~
ARE APPROXIMATE ONLY.
,
Page 28
APPENDIX D
Examples of Good and Poor Hillside
Practice and Guidelines for Hillside
Engineering
Page 29
EXAMPLES OF GOOD HILLSIDE PRACTICE
Sulfate water Interc:.pltOn dralna~. .
,
Watertight adequotely.ftad ondloundlld
100’waler 610tl1g1) I3flk$ ’.....,th due legard f<>t
Impact 01 enl)n!1c.3Moa)
flexible sttUelllle
Roof wnter PIPe 011 ,Ito or siDrod
011.$110 dewnllOIl ranks WIlleltlOn’ Md
adeQ\l8tely rounded POICln~’’oakllga
managed by 5ub-W11 drelns
\
,
,
._ MANTJ..E OF 801L ANII ROCK
\ FRAGM T$ (COLLUVIUMJ
,
\
-
Pler foolings Inlo ro<:k
-Sl,Ibsoildrlllnagamaybe
\ reql.led ’n slop!!
Cllttlllg end m~’19 mfntmiGOO In dOVClOpnWlt
-
Sewage efflUent ed OUl Of (Q!Ineeted 10 sewer
’fOtlks adequatoly foundQd (I,;w..ltcrilghL PotOClIJ3I
Icalge mon{lOd by suWOll dr&\1’I$
IlEDROCK
.Engineered l’lalnlng waUs WIth both surfa and
s\lbSur!bee dralf1age (COIl1truttOd before dw,Ulng)
EXAMPLES OF POOR HILLSIDE PRACTICE
UnstllbtllStil _Ii !oWl"
and Itavllls do...’fIslo~ "\
\’(,~11l mm -,
~rg of _IWnW ,lt SICP UlUupponocl ’
’
/.
l/jW~y I’ItIler l lln I;OI\QIICIJ!d 011
~It~ or 10 Secun> .,Ol1lpt IQr f..u ~
anf’U, -
.l~’’_
~
.
S1ruduIo unable to IOIot"t.
::::’:::d<a ~ \
-1.’.~:
Poodyc
unDV1"nIy I!nd C’J’IIOO pool
. ,- ~.
\ ~\ ~\
___~~
:-F)i
l
loose,.
=-~-"-
lUlitell fhLde5
’i
,’I
’\
\\ ";. ..,..
’
J
;
~~..:<..:::;’;:
""’-
~ r ’ -
, T"1 \. 87"5 "/?’
-’
..-l ~$dcMmtoPt
tnadeqlJlllely wpporIed tutlatls l .), r ..~-.....~’ -.f.:{.""
ROOft’lollOf Inlt lilt.. r.JOpe
I
tt,C’ ~NfUj ... -
’
SalOtltfed
slapefJIIIs \
~
~
OF SOIL" r
ROC/!FRAGMEIITS :\’\. f
~
" t ~ _
(COLLWI!JAlj,_
Vt’odllllQn
~ F../ ~,’1="r- Dwlllin~ l1Ol’OIInded I" !led1’O(:l(
\ ~~ -~_ h~ W>ROCK
’::::’ l’ ~~ -
;/
~ ~.......~L-- ’\ -~..
"__All4enI;eof subtIo. dmlN!Je y"lIvn ’,8
~ _ .....---- \.
’--Ponded WiJtor onlOlll $lond iJt"I3nd’ldll
~ POIislble I~~
.
w"’d\ 1InpaI:W CllMJlI ~
This figure Is an extract from PRACTICE NOTE GUIDELINES FOR LAND SLIDE RISK MANAGEMENT as presented In
Australian Geomechanlcs Journal and News, Volume 42, No 1, March 2007,which discusses the matter more fully.
Page 30
SOME GUIDEUNES FOR HILLSIDE CONSTRUcrION
GOOD ENGINEERING PRACTICE POOR ENGINEERING PRACTICE
ADVICE
GEOTECHNICAL Obtain advice from a qualified, experienced geotechn al practitimer at early Prepare detailed plan and start site works before
ASSE’>SMENT e of I ann
.
and before site works. technical advice.
PLANNING
SITE PLANNING Plan development withoot regard for the Risk.
Use flexible structures wlch incorponte properly designed brickwork, timber Floor plans which require extensive cutting and
or sted frames.timber er panel cladding. fling.
HOUSE DESIGN
Cmsider use ofsplit levels. Movement Bolerant structures.
Use decks for recreational areas where appropriate.
SITE CLEARING Retail natural velletatim wherever practicable. Indiscriminatelv clear the site.
ACCESS &. SatisfY requirements below for cuts. fiUs. retaining walls and drainage. Excavate and fill fer site access before
DRIVEWAYS CoonciJ specificatims for grades may need to be modified. geotechnical advice.
Driveways and paJiting areas may need to be fully suppated m piers.
EARTHWORKS Retail nalUra! contoors wherever possible. IndiscriminatttY bulk earthworks.
M imise depth. Large scale cuts and benching.
Suppcrt with engineered retaining walls or batter to sppropriate slope.
CUTs
Provide ~~measures and eT05im control. unsu,;~~’
l.Iln<ie- .
reauiremenl3
e
Minimise height Loose or poaiy compacted fill. wlch if it fals.
Strip vegetatim and topsoil and key into natural slopes prier to fining. may flow a considerable distance including
Use clean fill materials and compact to engineering standards. mto property below.
FlLI Batter to appropriate slope or suppcrt with engineered retaining wall. Block natural drainage tines.
Provide surface drainage and appropriate subsurl’acc dranage. Fill over existing vegetation and topsoil
Include slUmps, trees. vegetation, topsoil,
boolders. buildinll rubble etc in fiU.
ROCK OUTCROPS Remove or stabilise boulders wlch may have unacceptable risk. Distwb or undercut detached blocks or
&.BoUWERS SuPpcrt rock faces where necess .
boolders.
Engineer design to resist applied soil and water forces. Construct a structurally inadequate wall such as
Found m rock where practicable. sandstme flagging. brick or unreinforced
RETAINING
Provide subsurface drainage within wall backfill and surface drallBe on slope blockwork.
WAILS Lack ofsubsurface dra and weep holes.
above.
Cmstruct wall as som as possible after cut/fill operatim.
Found within rock where practicable. Fomd m topsoi~ loose fill. detached boulders
Use I’OWB ofpicrs or strip footings oriented up and down slope. or undercut cliffs.
FOOTINGS
Design for lateral creep pressures ifnecesS8l)’.
Backfill foOl excavations to exclude ingress of surface water.
Engineer designed.
Suppcrt on piers to rock where practable.
SWIMMING POOLS Provide with mder-drainage and gravity dran ootlct where practicable.
Design for high soil pressures wlch may develop on uphill side wllst there
may be little <X’ no lateral suoocrt m downhi1lside.
DRAINAGE
Provide at tops of cut and fill slopes. Discharge at top offills and cuts.
Discharge to street draagc or natural water coorses. Anow water to pond m benh areas.
SURFACE Provide general falls to prevent blockage by s tatim and incorporate silt traps.
Line to minimise infiltration and make flexible where possible.
Soccial structures to dissiDate energy at changes of slope and/or dircctim.
Provide filter aroond subsurface drain. Discharge roofrunoff into absOIJItim trenches.
Provide dran behind retaining walls.
SUBSURFACE
Use flexible pipelines with access for maintenance.
Prevent inflow of surface water.
Usually requires pump-out or mains sewer systems; absorptim trenches may Discharge sullage directly onto and into slopes.
SEPTIC &.
be possible il some areas ifrisk is acceptable. Use absorption trenches without cmsideratim
SU"U.oAGE
Storaae tanks shoold be water-tillht and adequately founded. oflandslide risk.
EROSION Cmtrol erosim as this may lead to instability. Failure to observe earthworkI and drae
CONTROL&. Revegctate cleared area. recommcndatims when landscaping.
LANDSCAPING
OWNER’S Clean drainllBe systems; rep8 broken joints in drains and leaks in supply
RESPONSffiIIlTY pipes.
Where structural distress is evident scc advice.
Ifseepaae observed, determine causes <X’ seek advice on cmsequences.
Page 31
./ ,/ [OCR of page images] ATTACHMENT D ~ Architectural Drawings
Used in these records
REFERENCED DOCUMENT - MCU13/0106Related documentApplication case desk ↗
REFERENCED DOCUMENT - MCU13/0106Related documentApplication case desk ↗
About this file
- File size
- 16.3 MB (very large file)
- File type
No other editions are linked here.
Original file
Log in to download the original file
The download may take a few minutes. On mobile data, it is best to wait for Wi-Fi.