Original source · versioned page text
REFERENCE DOCUMENTS - RAL25/0004 (As Published)
Very large file (40.5 MB): the original may take a few minutes to open or download. The page text below is quick to read.
Original PDF page 311, section 1. The text section number identifies this passage in the reader.
Page : 2 of 14
Work Order : EB2306000
Client : ENVIRONMENTAL ADVISORS
Project : 125 NSC LAKE McDONALD DVE, COOROY
General Comments
The analytical procedures used by ALS have been developed from established internationally recognised procedures such as those published by the USEPA, APHA, AS and NEPM. In house developed procedures
are fully validated and are often at the client request.
Where moisture determination has been performed, results are reported on a dry weight basis.
Where a reported less than (<) result is higher than the LOR, this may be due to primary sample extract /digestate dilution and/or insufficient sample for analysis. Where the LOR of a reported result differs from
standard LOR, this may be due to high moisture content, insufficient sample (reduced weight employed) or matrix interference.
Key : Anonymous = Refers to samples which are not specifically part of this work order but formed part of the QC process lot
CAS Number = CAS registry number from database maintained by Chemical Abstracts Services. The Chemical Abstracts Service is a division of the American Chemical Society.
LOR = Limit of reporting
RPD = Relative Percentage Difference
# = Indicates failed QC
Laboratory Duplicate (DUP) Report
The quality control term Laboratory Duplicate refers to a randomly selected intralaboratory split. Laboratory duplicates provide information regarding method precision and sample heterogeneity. The permitted ranges
for the Relative Percent Deviation (RPD) of Laboratory Duplicates are specified in ALS Method QWI -EN/38 and are dependent on the magnitude of results in comparison to the level of reporting: Result < 10 times LOR:
No Limit; Result between 10 and 20 times LOR: 0% - 50%; Result > 20 times LOR: 0% - 20%.
Sub-Matrix: SOIL Laboratory Duplicate (DUP) Report
Laboratory sample ID Sample ID Method: Compound CAS Number LOR Unit Original Result Duplicate Result RPD (%) Acceptable RPD (%)
EG005(ED093)T: Total Metals by ICP-AES (QC Lot: 4906373)
EB2305781-001 Anonymous EG005T: Cadmium 7440-43-9 1 mg/kg 2 3 0.0 No Limit
EG005T: Chromium 7440-47-3 2 mg/kg 10 8 16.2 No Limit
EG005T: Nickel 7440-02-0 2 mg/kg 7 3 87.4 No Limit
EG005T: Arsenic 7440-38-2 5 mg/kg <5 <5 0.0 No Limit
EG005T: Copper 7440-50-8 5 mg/kg 25 20 20.3 No Limit
EG005T: Lead 7439-92-1 5 mg/kg 60 58 4.0 0% - 50%
EG005T: Zinc 7440-66-6 5 mg/kg 72 78 8.8 0% - 50%
EG005T: Iron 7439-89-6 50 mg/kg 26900 # 6660 121 0% - 20%
EB2305781-017 Anonymous EG005T: Cadmium 7440-43-9 1 mg/kg <1 <1 0.0 No Limit
EG005T: Chromium 7440-47-3 2 mg/kg 6 6 0.0 No Limit
EG005T: Nickel 7440-02-0 2 mg/kg 6 7 0.0 No Limit
EG005T: Arsenic 7440-38-2 5 mg/kg 5 <5 0.0 No Limit
EG005T: Copper 7440-50-8 5 mg/kg 18 20 10.8 No Limit
EG005T: Lead 7439-92-1 5 mg/kg 160 # 202 23.2 0% - 20%
EG005T: Zinc 7440-66-6 5 mg/kg 127 145 13.7 0% - 20%
EG005T: Iron 7439-89-6 50 mg/kg 20400 22000 7.7 0% - 20%
EG005(ED093)T: Total Metals by ICP-AES (QC Lot: 4906375)
EB2306000-015 TP5-0.5 EG005T: Cadmium 7440-43-9 1 mg/kg <1 <1 0.0 No Limit
EG005T: Chromium 7440-47-3 2 mg/kg 21 19 8.0 0% - 50%
EG005T: Nickel 7440-02-0 2 mg/kg <2 <2 0.0 No Limit
EG005T: Arsenic 7440-38-2 5 mg/kg <5 <5 0.0 No Limit
EG005T: Copper 7440-50-8 5 mg/kg <5 <5 0.0 No Limit
EG005T: Lead 7439-92-1 5 mg/kg 6 5 0.0 No Limit
EG005T: Zinc 7440-66-6 5 mg/kg 26 26 0.0 No Limit
Document Set ID: 23717062
Version: 0, Version Date: 01/01/1900
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalLog in to download the original file
The download may take a few minutes. On mobile data, it is best to wait for Wi-Fi.