Council archive · source document
REFERENCE DOCUMENTS - RAL25/0004 (As Published)
Very large file (40.5 MB): the original may take a few minutes to open or download. The page text below is quick to read.
Original PDF page 545, section 1. The text section number identifies this passage in the reader.
Page : 21 of 22
Work Order : EB2406372
Client : ENVIRONMENTAL ADVISORS
Project : 125 NSC LAKE McDONALD DVE, COOROY
Brief Method Summaries
The analytical procedures used by the Environmental Division have been developed from established internationally recognized procedures such as those published by the US EPA, APHA, AS and NEPM. In house
developed procedures are employed in the absence of documented standards or by client request. The following report provides brief descriptions of the analytical procedures employed for results reported in the
Certificate of Analysis. Sources from which ALS methods have been developed are provided within the Method Descriptions.
Analytical Methods Method Matrix Method Descriptions
Moisture Content EA055 SOIL In house: A gravimetric procedure based on weight loss over a 12 hour drying period at 105-110 degrees C.
This method is compliant with NEPM Schedule B(3).
Asbestos Identification in Soils EA200 SOIL AS 4964 Method for the qualitative identification of asbestos in bulk samples Analysis by Polarised Light
Microscopy including dispersion staining
Total Metals by ICP-AES EG005T SOIL In house: Referenced to APHA 3120; USEPA SW 846 - 6010. Metals are determined following an appropriate
acid digestion of the soil. The ICPAES technique ionises samples in a plasma, emitting a characteristic
spectrum based on metals present. Intensities at selected wavelengths are compared against those of matrix
matched standards. This method is compliant with NEPM Schedule B(3)
Total Mercury by FIMS EG035T SOIL In house: Referenced to APHA 3112 Hg - B (Flow-injection (SnCl2) (Cold Vapour generation) AAS) FIM-AAS is an
automated flameless atomic absorption technique. Mercury in solids are determined following an appropriate
acid digestion. Ionic mercury is reduced online to atomic mercury vapour by SnCl2 which is then purged into a
heated quartz cell. Quantification is by comparing absorbance against a calibration curve. This method is
compliant with NEPM Schedule B(3)
Polychlorinated Biphenyls (PCB) EP066 SOIL In house: Referenced to USEPA SW 846 - 8270 Extracts are analysed by Capillary GC/MS and quantification is
by comparison against an established 5 point calibration curve. This method is compliant with NEPM Schedule
B(3).
Pesticides by GCMS EP068 SOIL In house: Referenced to USEPA SW 846 - 8270 Extracts are analysed by Capillary GC/MS and quantification is by
comparison against an established 5 point calibration curve. This technique is compliant with NEPM Schedule
B(3).
TRH - Semivolatile Fraction EP071 SOIL In house: Referenced to USEPA SW 846 - 8015 Sample extracts are analysed by Capillary GC/FID and
quantified against alkane standards over the range C10 - C40. Compliant with NEPM Schedule B(3).
Semivolatile Organic Compounds EP075 SOIL In house: Referenced to USEPA SW 846 - 8270 Extracts are analysed by Capillary GC/MS and quantification is
by comparison against an established 5 point calibration curve. This technique is compliant with NEPM
Schedule B(3).
PAH/Phenols (SIM) EP075(SIM) SOIL In house: Referenced to USEPA SW 846 - 8270. Extracts are analysed by Capillary GC/MS in Selective Ion Mode
(SIM) and quantification is by comparison against an established 5 point calibration curve. This method is
compliant with NEPM Schedule B(3)
TRH Volatiles/BTEX EP080 SOIL In house: Referenced to USEPA SW 846 - 8260. Extracts are analysed by Purge and Trap, Capillary GC/MS.
Quantification is by comparison against an established 5 point calibration curve. Compliant with NEPM
Schedule B(3) amended.
Per- and Polyfluoroalkyl Substances EP231X SOIL In-house: Analysis of soils by solvent extraction followed by LC-Electrospray-MS-MS, Negative Mode using MRM
(PFAS) by LCMSMS using internal standard quantitation. Isotopically labelled analogues of target analytes used as internal
standards and surrogates are added to a portion of soil which is then extracted with MTBE and an ion pairing
reagent. A portion of extract is exchanged into the analytical solvent mixture, combined with an equal volume
reagent water and filtered for analysis. Method procedures and data quality objectives conform to US DoD QSM
5.3, table B-15 requirements.
Document Set ID: 23717062
Version: 0, Version Date: 01/01/1900
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalLog in to download the original file
The download may take a few minutes. On mobile data, it is best to wait for Wi-Fi.