wastewater design report

ADVANCED
ENVIRO-SEPTIC Advanced Enviro-septic Design Calculator V8.8
“Always The First Option”

 

LPT OW ghey LLL

     

 

 

 

 

Sit
Adis 330 (LOT 2 S$P241381] SISTER TREE CREEK ROAD, KIN KIN CABINS | & 2 State QLD Post Code 4571
Client
Name Yee N de iS Date of Site Visit 31/02/2022
igners Ph i
Designers 4 | TRELOAR, UNEARTHED GEOTECHNICAL P/L Desianes, 0417 132 300 Number 9BCC740251
Name Number
Plumber Ph Plumb / Drainer
oe Number Lic Number
Council Designers AES
pram NOOSA Cert Number Date 2/2/2022

 

 

 

other site constraints addressed by the qu

 

ified desiga

 

sification, surface water, water tables an

    

‘This Calculator is a guide only, receiving soil

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Enter AES L/m loading rate, "30" for ADV Secondary or "38" Secondary 30 [>> This design is for an ADVANCED ‘ONDARY system

Is this a new installation Y or N y >> Minimun single vent size is 80mm or 2 x 50mm house vents

Number of person 4 a septic tank outlet filter is NOT RECOMMENDED
Daily Design Flow Allowance Litre/Person/Day 120
Number of rows required to suit site constrants 2 >>The maximum length of a single AES pipe run is 30 meters
Infiltration surface Soil Cat as est by site/soil evaluation. CATEGORY 5 >> Catagory may require design considerations. Ref AS 1547
Design Loading Rate based on site & soil DLR (mnvday) 8 >> Soil condi may be ry. Ref ASIS47 & C

Bore log depth below system Basel area 600__|>>Min depth below basel area 600mm check water table/restrictive laye

AES FOOTPRINT MUST BE LEVEL WITH TRENCH EXTENSION 1 >>Consideration reqd for Sloping sites. Ref AS1547. refer comment.
Is this design a gravity system with no outlet filter? Y or N ¥ >> A House Vent & LOW VENT required on this system

 

PLEASE CHECK YOU HAVE FALL FROM TANK TO AES SYSTEM PIPES

 

 

COMMENTS :-" The ontcome must be important to everyone."
- Ripping of receiving surface required in clay soil structures in Cat 4,5,6. In addition refer to AS 1547. Always excavate & rip parallel to the site slope/AES pipe.
- Specialist soils advice & special design techniques will be required for clay dominated soil having dispersive or shrink/swell behaviour. Refer AS 1547

+ All Sloping sites require special consideration and management through design of slope percentage, surface water and construction methods as per AS1547.

- Plumbers are reminded that good construction techniques as per AS 1547 are especilly important in these soil types. Refer AS1547 & AES installation Instructions

 

 

 

 

 

 

 

 

   

 

 

 

 

Total System load - litres / day (Q). 480 Vd AES System Extension Area
Min Length of AES pipe rows to treat loading 8.0 Im ILth m: (L)
Number of FULL AES Pipe lengths per row 3 Iths Width m:(W)
Sane 0.75 0.15
Total Capacity of AES System pipe in Litres 1272 Ite. | Denth : ‘i .
Area m2 13.0 47.0
USE CUT LENGTHS OF PIPE IN THIS DESIGN? (ENTER. I | >>Slope percentage must be 0% & infiltration footprint must be level |
IF YOU WISH TO USE A TRENCH EXTENSION DESIGN OPTION ENTER "Y’ | Y Enter Custom Width in metre 4
AES INFILTRATION FOOT PRINT AREA. L=Q/(DLRxW) | Length Width Minimum AES foot print required .
The length & width of excavation required for this design is >> “a x ‘ = a m2 total

 

 

   

A trench design has a max of 2 rows of AES pipes located 300mm from up slope side and centered lenght wise in the (reneh is better.

     

ace Gans GG Sis tie eee

  

 

 

    

AES-PIPE AES 3 mtr Lths required 6 ths: Digitally signed by
AESC AESC Couplings required 4 ca Steve Dennis
DN: cn=Steve
AESO AESO Offset adaptors 4 ca ,
" Dennis, o=Chankar|
AESODV AES Oxgen demand vent 1 a Enviromental,
AES IPB AES 100mm Inspection point base 2 ca G@ Agvanced,__..ou=Design
“ious Werewsrrsoition™ Review,
AES Equ AES Speed Flow Equaliser ca emfitesteye@envir
AES DESC Double Offset Adaptors ca o-septic.com.au,
c=US
TOTAL SYSTEM SAND REQUIRED (Guide Only) 20 m3
Date: 2022.02.03
PLEASE email your AES CALC and Dray 11:51:34 +10'00'
DESIG [email protected] Dotiguveclon iecarion nepal creme

 

 

> The AES Calculator is a design aid to allow checking of the AES components and configuration and is a guide only, Sire and soil
conditions referencing the AS 1547 standard are calculated and designed by a Quailified Designer
> Chankar Environmental has no responsibility for the soil evaluation, loading calculations or DLR entered by the designer for this calculator.

> AES pipes can be cut to length on site. They are supplied in 3 meter Iths only

 

 

AES-Design-V8.8-Calculator © Copy Right - Chankar Environmental pty Itd 14/3/2016