Skip to the record
Accept no imitations.

Original source · versioned page text

Att 1 - Code Assessment

of 25
                                     (b)    allow for landscape
                                            treatments to soften the
                                            development;and
                                     (c)    avoid more than six dwellings
                                            attached in any one plane.
                                                                             Not Applicable
                                     AO10.4
                                     For corner sites, the
                                     building design addresses
                                     both streetfrontages by:
                                     (a)    including doors and windows
                                            that front each road; and
                                     (b)    providing separate vehicle
                                            access points to each road.
                                     Editor’s Note—for examples of
                                     designs that meet above provisions
                                     see Figure 6.3.3.4 and Figure AP3-4A
                                                                             Not Applicable

                                     AO10.5
                                     For a dwelling house, development
                                     provides visual interest to thestreet
                                     and the surrounding area through:
                                     (a)    limiting the vertical
                                            distance between the
                                            ground and thelowest
                                            suspended floor to no
                                            more than 3 metres;
                                     (b)    limiting the length of any
                                            external wall in one plane
                                            to 15metres; and
                                     (c)    ensuring each external
                                            wall includes at least one
                                            design element such as
                                            verandahs, external stairs,
                                            window           openings,
                                            awnings or porches.
Garage and Carports                 AO11.1                                   Complies
PO11                                Covered car parking spaces are not
Garage doors and carports do not
                                    located between the buildingand
dominate the street or the building
design.                             the road frontage.

                                     AO11.2                                  Complies
                                     Garages and covered car parking
                                     are integrated with the line and
                                     plain of the building

                                     AO11.3                                  Not Applicable
                                     Where multiple garages face the
                                     street, they are separated by a
                                     minimum of 2 metres or are
                                     staggered in setback by a minimum
                                     of1 metre.

Log in to download the original (Att 1 - Code Assessment.pdf)

Searchable page text hides email addresses. Original files are unchanged and may show email addresses.

The supporting record

Open full page ↗

Source document

Analyse documents ↗Open full page ↗

My Comparisons

Choose two to four records of the same kind. Drag using a handle or use the “Compare” buttons.

Your selected records are saved in this browser for your account. Results use the filters on the page where you choose “Compare selected”.