Attachment B - Proposal Plans · 51987.2898.03

                                   cover sheets                                                                                                                                                                                                                          COPYRIGHT: Drawings remain the Copyright of the Architect: Shaun                          ROOF DRAINAGE: All downpipes to be located as noted on the
                                   SD     000.00      perspective image                       G         26.03.19                                                                                                                                                         Lockyer                                                                                   drawings and sizes as scheduled. Allow to connect to in-ground storm
                                   SD     000.01      contents / lists / notes                G         26.03.19                                                                                                                                                                                                                                                   water drains with 90mmØ UPVC at 1:100 minimum grade. Allow for
                                                                                                                                                                                                                                                                         ALL WORKS shall be carried out in accordance with the Building Code                       I.O.'s at each change of direction and at 6000mm centres.
                                   existing photographs
                                   SD      010.00     site conditions                         H         26.03.19                                                                                                                                                         of Australia, Australian Standards, Local Council requirements, QDC
                                   SD      010.01     site conditions                         H         26.03.19                                                                                                                                                         guidelines and all other relevant by laws and authorities. In particular                  SITE DISCHARGE: All stormwater and sanitary plumbing to be
                                                                                                                                                                                                                                                                         refer Australian standards:                                                               connected to existing council system in accordance with the
                                   town plannig                                                                                                                                                                                                                          · site preparation A.S. 3798                                                              requirements of the relevant local authority.
                                   SD     010.02      site - town planning                    A         26.03.19                                                                                                                                                         · concrete construction A.S. 2870
                                                                                                                                                                                                                                                                         · timber construction and details A.S. 1684.2                                             WATER LINES: All hot water lines shall be fully insulated. All domestic
                                   town planning
                                                                                                                                                                                                                                                                         · steelwork AS 4100, AS 1111 and A.S. 1112                                                hot water to basins, showers and baths to have maximum temperature
                                   SD     010.03      basement - town planning                A         26.03.19
                                   SD     010.04      ground - town planning                  A         26.03.19
                                                                                                                                                                                                                                                                         . termite protection BCA and A.S. 3660.1                                                  of 50°C. Allow to supply and install tempering valves where required,
                                   SD     010.05      level 01 - town planning                A         26.03.19                                                                                                                                                         . artificial lighting & ventilation BCA parts 3.8.4/3.8.5 and A.S. 1680                   as nominated in the BCA and relevant standards.
                                                                                                                                                                                                                                                                         . fire safety BCA part 3.7
                                   sections                                                                                                                                                                                                                              . smoke alarms BCA part 3.7.2 and A.S. 3786                                               STAIR AND BALUSTRADES: All stair and balustrades shall comply
                                   SD     010.06      typical sections - town planning        A         26.03.19                                                                                                                                                         . glazing BCA part 3.6 and A.S. 1288 and A.S. 2047                                        with part 3.9 of the BCA. Steps to be provided where fall from dwelling
                                                                                                                                                                                                                                                                                                                                                                   exceeds 190mm.
                                   reference images                                                                                                                                                                                                                      APPROVAL: No building work shall be undertaken prior to Building
                                   SD     020.00      form and material                       H         26.03.19
                                                                                                                                                                                                                                                                         Approval by a registered Certifier.                                                       ALL PRODUCTS: To be installed to manufacturers requirements and
                                   SD     020.01      form and material                       H         26.03.19
                                                                                                                                                                                                                                                                                                                                                                   to be in accordance with manufacturers requirements for suitable
                                   material pallet                                                                                                                                                                                                                       CONSULTANTS: Drawings shall be read in conjunction with engineers                         exposure levels.
                                   SD     020.02      proposed materials - town planning      A         26.03.19                                                                                                                                                         drawings and computations. All structure to Engineers design.
                                                                                                                                                                                                                                                                         Hydraulic sizing and design to hydraulic engineers requirements. All                      PROPRIETARY ITEMS: Identification of a proprietary item does not
                                   perspective image                                                                                                                                                                                                                     drawings to be co-ordinated with consultant documentation prior to                        necessarily imply exclusive preference for the item so identified, but
                                   SD    050.00      perspective view                         H         26.03.19                                                                                                                                                         construction.                                                                             indicates the necessary properties of the item. If alternatives are
                                   SD    050.01      perspective view                         H         26.03.19
                                   SD    050.02      perspective view                         H         26.03.19
                                                                                                                                                                                                                                                                                                                                                                   proposed, submit proposed alternatives and include samples, available
                                   SD    050.03      perspective view                         H         26.03.19
                                                                                                                                                                                                                                                                         DIMENSIONS: Do not scale off drawings - use figured dimensions only.                      technical information, reasons for proposed substitutions and cost.
                                   SD    050.04      perspective view                         F         26.03.19                                                                                                                                                         Contractor shall verify all dimensions on site prior to construction. Any
                                   SD    050.05      perspective view                         F         26.03.19                                                                                                                                                         discrepancies or errors shall be referred to architect and client prior to                TILES: Expansion joints, walls: 5mm. Floors: 8mm. Fill both with
                                   SD    050.12      perspective view                         C         26.03.19                                                                                                                                                         installation / manufacture of any works. Confirm levels & RL's on site                    silicone rubber. Grout for wall: Epoxy based mildew resistant. Grout for
                                                                                                                                                                                                                                                                         prior to commencement of work.                                                            floors: prepared grout to be acid resistant. all wall tiles to have
                                   site plans
                                                                                                                                                                                                                                                                                                                                                                   fcsubstrate.
                                   SD      100.00     locality plans                          F         26.03.19
                                                                                                                                                                                                                                                                         SETOUT: Contractor to confirm exact siting and orientation prior to
                                   SD      100.01     site plan                               F         26.03.19
                                                                                                                                                                                                                                                                         construction setout. All building setout and confirmation of setbacks




                                                                                                                                                                                                                                            general construction notes
      architectural drawing list




                                                                                                                                                                                                                                                                                                                                                                   INTERNAL PAINTING: Unless noted otherwise paint system to be
                                   existing plans                                                                                                                                                                                                                        and height to be carried out by a Licensed Surveyor. No footing, or wall                  Dulux approved 3 coat system - low sheen finish. Colours to be
                                   SD      180.00     basement floor                          G         26.03.19                                                                                                                                                         to encroach the title boundary.                                                           supplied by Architect during contract and applied as per Dulux's
                                   SD      180.01     ground floor                            G         26.03.19                                                                                                                                                                                                                                                   recommendations and guidelines.
                                   SD      180.02     first floor                             C         26.03.19                                                                                                                                                         TERMITE PROTECTION: Termite protection by means of termimesh
                                                                                                                                                                                                                                                                         s.s. mesh hysical barrier in accordance with A.S. 3660.1/2000 and                         JOINERY ITEMS SHALL INCLUDE: Manufactured casework items,
                                   floor plans                                                                                                                                                                                                                           installed in strict accordance with current manufacturers specifications.                 including: kitchen cabinets and cupboards; bathroom cabinets; robes.
                                   SD      200.00     basement floor                          H         26.03.19
                                   SD      200.01     ground floor                            H         26.03.19
                                   SD      200.02     first floor                             C         26.03.19                                                                                                                                                         STRUCTURAL STEEL: Unless noted otherwise all exposed                                      SANITARY COMPARTMENTS: Provide removable hinges to doors of
                                                                                                                                                                                                                                                                         structuralsteel, anchor bolts and other attachments shall be hot dip                      sanitary compartments to comply with BCA 3.8.3.3 and be readily
                                   elevations                                                                                                                                                                                                                            galvanised. A cold gal painted finish shall be applied to any field                       removable from outside unless there is a clear space of at least
                                   SD      300.00     east elevation - south                  F         26.03.19                                                                                                                                                         welding to existing or new steelwork. All steel work cast in concrete                     1200mm b/w closet pan within the sanitary compartment and the
                                   SD      300.01     east elevation - north                  F         26.03.19                                                                                                                                                         footings or slab shall have a bitumen finish applied to full extent of cast               nearest part of the doorway.
                                   SD      300.02     elevations                              F         26.03.19                                                                                                                                                         in concrete steel. Check all dimensions on site prior to fabrication of
                                                                                                                                                                                                                                                                         steelwork.                                                                                APPLIANCES & EQUIPMENT: Builder to co-ordinate all appliance and
                                                                                                                                                                                                                                                                                                                                                                   equipment locations on site and with joiner. installation and final
                                                                                                                                                                                                                                                                         RETAINING WALLS: All retaining walls to structural engineers details.                     connection by the contractor.
                                                                                                                                                                                                                                                                         Provide rubble backfill and agg drainage to all retaining walls. Builder to
                                                                                                                                                                                                                                                                         provide tanking where required.                                                           WEATHERSTRIPS: All external doors to contain weather stripping
                                                                                                                                                                                                                                                                                                                                                                   (type to be confirmed by Architect prior to manufacture)
                                                                                                                                                                                                                                                                         SLAB & FOOTINGS: All slabs and footings to structural engineers
                                                                                                                                                                                                                                                                         details. A polyethylene moisture barrier shall be lapped 200mm and                        DOCUMENTATION: The contractor shall carry out works in
                                                                                                                                                                                                                                                                         fully taped under any habitable concrete slab and shall extend 100mm                      accordance with the signed drawings and schedules and anything
                                                                                                                                                                                                                                                                         onto the perimeter footing.                                                               reasonable inferred, and with the Conditions of Contract, and in
                                                                                                                                                                                                                                                                                                                                                                   accordance with the directions and to the satisfaction of the Architect,
                                                                                                                                                                                                                                                                         ARTICULATION JOINTS: Provide articulation joints to comply with                           whose interpretation of the contract documents shall be final. The
                                                                                                                                                                                                                                                                         "Cement and Concrete Association Construction Note TN9".                                  drawings and specifications/schedules shall be considered
                                                                                                                                                                                                                                                                                                                                                                   complementary, and any
                                                                                                                                                                                                                                                                         EROSION CONTROLS: All building works to comply with local                                 work and/or materials absent from one but present or implied in the
                                                                                                                                                                                                                                                                         authorities Erosion and sediment control standards.                                       other shall be furnished as if they were present in both.

                                                                                                                                                                                                                                                                         WATERPROOFING: All wet areas and walls to be waterproofed in                              FINAL CERTIFICATE: At completion of work, Builder to obtain and
                                                                                                                                                                                                                                                                         accordance with the BCA 3.8 & AS 3740. Builder to provide certificate                     supply a Certificate of Classification from a Building Certifier.
                                                                                                                                                                                                                                                                         of installation and compliance.
                                                                                                                                                                                                                                                                                                                                                                   POOL: Contractor to confirm heights/depths/steps and
                                                                                                                                                                                                                                                                         CONCEALMENT OF SERVICES: All services shall be concealed in                               plumbing/electrical requirements and locations prior to construction
                                                                                                                                                                                                                                                                         walls or ducts. Where services are exposed they must be confirmed by
                                                                                                                                                                                                                                                                         the Designer on site prior to installation unless noted otherwise.

                                                                                                                                                                                                                                                                         LICENSED TRADESPERSONS: All services to be installed by licensed
                                                                                                                                                                                                                                                                         tradespersons in accordance with local authority and with current
                                                                                                                                                                                                                                                                         manufacturers specifications.




                                                                                                                                                                      DRAWN     REV      DATE           ISSUE                                               PROJECT                                       CLIENT                                        DRAWING NAME                                      PHASE         DWG NO               REV
                                                                                                                                                                                                                                                                                                                                                                                                                                                        PROJECT NO 0270
                                                                                                                                                                      MN
                                                                                                                                                                      MN
                                                                                                                                                                                D
                                                                                                                                                                                E
                                                                                                                                                                                         01.02.19
                                                                                                                                                                                         12.02.19
                                                                                                                                                                                                        revised concept issue
                                                                                                                                                                                                        revised concept issue
                                                                                                                                                                                                                                                            21-23 Webb Road,                              David and Elena                               cover sheets                                     SD              000.01              G          SCALE       1:1
                                                                                                                                                                                                                                                                                                                                                        contents / lists / notes
                                                                                                                                                                      MN        F        14.02.19       revised concept issue                               Sunshine Beach                                Russell
                                                                                                                                                                      DL        G        26.03.19       for approvals                                                                                                                                                                                             schematic design
                                                                                                                                                                                                                                                                                                                                                                                                                                                        1:1 @        A3
Do not scale from drawings. Dimensions are to be checked on site prior to commencement of work. Discrepancies to be brought to the attention of the author. Any dimensions not nominated must be referred to the Architect for confirmation. The concepts and information contained in this document are the copyright of Architect. Use or copying of the document in whole or in part without the written permission of the Architect constitutes an infringement of copyright.