Council archive · source document
Minor Change Existing Approval MCU19/0149 02 (AS PUBLISHED) · MCU19/0149.02
Building Height
9. The maximum height of the development must not exceed 8 metres above the finished
ground level and the natural ground level.
10. Certification must be submitted to Council from a Licensed Surveyor which certifies that the
building does not exceed the maximum height requirement of this Decision Notice.
Building Appearance
11. Ground floor premises provide a minimum of 50% transparent glazing to shopfronts to create
active building fronts.
12. All mechanical equipment and other service infrastructure located on the site must be:
a. located not less than 2 metres from a property boundary; and
b. fully enclosed or screened such that they are not visible from the street frontages nor
adjoining properties.
13. Roof materials must be non-reflective and designed with colours and styles to minimise the
visual impact of the development.
Weather Protection
14. Street awnings must be provided along the full length of the Elm Street frontage, as shown
on the Approved Plans. The awnings must:
a. be cantilevered over the road reserve to a maximum height of 3m, with any posts to be
timber and non-structural;
b. have a minimum width of 2 metres from the building line along Elm Street and must
not extend further into the road reserve than the location of the existing public footpath
located within the road reserve;
c. deleted;
d. be designed and constructed to allow for the unencumbered growth of street trees; and
e. be designed to provide continuous solar and rain protection and promote all weather
activity.
Advertising Devices
15. Any advertising devices proposed on the site must comply with the provisions of The Noosa
Plan and any relevant Council advertising devices policies.
Public Safety
16. Ground floor premises provide a minimum of 50% transparent glazing to shopfronts to create
active building fronts. All shopfront glazing must be protected against vandalism by the use
of a form of safety glass such as toughened or laminated glass.
Outdoor Lighting Devices
17. Lighting associated with the use must be designed, sited, installed and tested to comply with
Table 2.1 & 2.2 of Australian Standard AS4282-1997 “Control of the obtrusive effects of
outdoor lighting” using a control level of 1.
18. Certification must be submitted to Council from a qualified person which certifies that all
outdoor lighting devices comply with the requirements of this Decision Notice at the time of
commissioning.
Landscaping
19. The development site must be landscaped. The works must be undertaken in accordance
with an Operational Works approval and Planning Scheme Policy PSP 3 – Landscaping
Plants and Guidelines and must include in particular:
Page 3 of 11
Document Set ID: 23199036
Version: 3, Version Date: 16/08/2024
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalUsed in these records
Minor Change Existing Approval MCU19/0149 02 (AS PUBLISHED)Related documentApplication case desk ↗
About this file
- File size
- 183 KB (small file)
- File type
No other editions are linked here.