Council archive · source document
Crossover application for Standard Application · OPW18/0094
Attached to the e-mail Operational Works Application OPW18/0094 - 2 Witta Circle Noosa Heads.
Standard Vehicle Crossover Application Section 75 Local Government Act (2009) If access to your property is from a Queensland Government controlled road, you will require approval from the Department of Transport and Main Roads to complete your crossover construction. Do not submit this application. A vehicle crossover can only be classified as self-assessable providing that it complies with all of the attached conditions and the appropriate standard drawings — RS-049 and RS-050 (residential type) or RS-056 (rural type). This is af . If you answer ‘no’ to any of the following condition requirements, or are constructing a crossover that is in an urban area and not concrete or asphalt/bitumen, this application will not be self assessable and an Operational Works approval is required. is required to be submitted. 1. Applicant details (Applicant must be the property owner or provide written authority to act on behalf of the Surname M= DoniALD GivenNames MK/S ROBERT + GAYE Postal Address 2B WITTA CIRCLE Suburb Neos HEADS State QLO Postcode 4567 Business Phone AIH Phone Mobile O4 © 7 O17 oy Email Address necrevisTa@ ketmail .com Fax w/a Pa dco) ona CLIC) StreetAddress 2 Wt7TR CURCLE Suburb NoosA HERDS State O20 Postcode 45% Property Number (from Rates Notice) LotandRP LOT (22 on N2/84.5 3. Type of crossover to be constructed JA Urban residential crossover (removal/alteration of kerb) — must be constructed as per standard drawing RS-049 and RS-050 O Rural crossover (pipe crossing) — must be constructed as per standard drawing RS-056 (Gravel) RPK OH al=Ce1 I) a el mol) ri Is the crossover to be constructed from concrete (includes plain, coloured or exposed aggregate concrete), asphalt or bitumen? Stenciled or raised edges are considered as Non Standard. A yes O1No Is this going to be the only crossover for this property? YES. EXISTING CRESSNER To BE WIDENED Yes [3No Is the crossover access located so as to provide a clear view of passing pedestrians and vehicles? Yes (1No Is the crossover in a location where there are no painted or concrete traffic islands on the road in front of the crossover? & Yes T] No Is the crossover at least 1.0 metre clear of the nearest stormwater pit or power pole? TL Yes O No Is the crossover in a location where there are no road signs or trees in the way? f@ Yes O No Is the crossover in a location where its construction will not disturb a survey mark? &l Yes O No Is the crossover, in a location where there are no water meters, fire hydrants or valves in the path of the crossover? - 8 Yes 0 No Is the crossover in a location where it will not cover the water supply pipe between the main and 2 the meter? Yes 0 No Is the crossover in a location where there are no sewerage or stormwater manholes in the path of the crossover? Yes DINo Will the crossover levels match the existing concrete footpaths (if present)? Yes ONo
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalFull text of the other 2 pages
Page 2
RE re ala ec) Is the crossover outside of a prohibited location as shown in Standard Drawings number RS-049 and RS-050 or for rural crossover Standard Drawing number RS-056? Yes No Is the crossover in a location where it will not be within 10 metre of the approach side of a bus stop? El Yes ONo Is the crossover in a location where it will not be built over a council easement? Ef Yes O No Will the crossover be constructed in accordance with the appropriate Standard Drawings — RS-049 and RS-050 or RS-056 (including levels and grades)? f Yes O No For a residential crossover is it under 25 metres in length within the road reserve? Yes O No For a rural crossover is it under 45 metres in length within the road reserve? SSN/A Yes DINo If you are on a corner, will the crossover be constructed in the road described in your street address?%, N/A Yes O No Note: If you have answered ‘ NO ’ to any of the above condition requirements, the application will not be self-assessable and an Operational Works approval is required. 4. Declaration of applicant We have read, understood and hereby agree to comply with the attached conditions. We understand that the construction of a crossover is the responsibility of the property owner. \We understand that the construction of the crossover is at the risk of the owner. We understand that the removal and reinstatement of the impacted section of the kerb and channel is considered to be part of the construction of the crossover and therefore the responsibility of the property owner. \We understand that if excavation is required I/we should contact “Dial Before You Dig” on 1100. We understand that any damage caused by my activity or damage not notified to council prior to commencing work will be repaired at my expense. We understand that Noosa Shire Council has the discretion to remove or modify any crossover not constructed or maintained to council's satisfaction or if a reasonable objection is raised by a public utility provider or others and that any such modification will be at my expense. We understand that if I/we do not comply with the standard drawings, conditions and requirements, council may direct me to undertake modifications of the crossover at my expense. We understand that if I/we fail to comply with a direction from council regarding my crossover, council may attend to any modifications necessary to ensure compliance with its standard drawings, conditions and requirements at my expense. We agree to indemnify Noosa Shire Council against any claims in negligence or breach of contract relating to the crossover that I/we construct and maintain. - We understand where our crossover is required to be removed or modified by Noosa Shire Council or a public utility provider there is no expectation or requirement to reinstate the crossover as constructed but rather only to reinstate to a standard compliant with the standard drawings. We agree that if and when we sell the property, I/We will advise the new owner of the conditions described in this document, which will then apply to the new owner. | agree to maintain the vehicular crossover in a safe condition to the satisfaction of the Noosa Shire Council's Civil Works Services Manager. If I/we fail to do so or a reasonable objection to the crossover is raised by others, Council may issue a direction to bring the vehicular access into compliance with Council's standards. Should there be further non-compliance; penalties under section 75 of the Local Government Act (2009) may apply. We, the applicant, declare that the above information is correct in all respects, at the time of lodgment of this application with the Noosa Shire Council. Should any of the details given in relation to this application be changed in the future, the applicant shall advise the Noosa Shire Council in writing prior to any such change being implemented. Signature Cy ; (munepy Lyons OEsIeN) Date UW Bills ON HALF OF MRIS ReBSERT v Gare ME DosAnp
Page 3
Site Diagram including proposed dimensions must be provided az" oe" o&" ~Ssie5 LINE & ‘i 4 « Application no. Amount paid Receipt no. Initial Date stamp Nil N/A Privacy Council will use any personal information provided for the intended purpose only and for remaining in contact with you. Council is authorised to collect this information in accordance with the Local Government Act 2009 and other Local Government Acts. Your personal information is only accessed by persons authorised to do so. Your personal information is dealt with in accordance with council's privacy policy.
Used in these records
Crossover application for Standard Application.pdfRelated documentApplication case desk ↗
About this file
- File size
- 1.4 MB (small file)
- File type
No other editions are linked here.