Original source · versioned page text
240314 AGLA Margit Crescent (11), Sunrise Beach DLP Issue B
LANDSCAPE NOTES
GENERAL NOTES TURF PODIUM PLANTERS IRRIGATION
A. ARCHITECTURAL WORKS INFORMATION SUBGRADE PREPARATION: TOPSOIL: Planting plan has been designed to survive without an automatic irrigation system. Water additives and water
Refer to Architect's drawings for all information contained within these documents related to and nominated as Turfed areas shall be prepared initially by removing all deleterious material Supply and install imported topsoil suitable for podium planters (UltraGrow Platinum Podium and Container retention elements, along with hardy water-wise plants will ensure an irrigation system is not imperative to the
Architectural Works. This includes all hardscape items such as paving, outdoor structures / shelters, walls and Cultivate subgrade surface by thoroughly ripping to a minimum depth of 150mm before spreading topsoil unless Mix.) Proposed topsoil must comply with Australian Standards AS4419-2003 and Australian Standards long-term maturation and survival of the proposed plants. If approved, install an automatic, fixed position, low
fencing. Architectural Works information contained within these documents are indicative only and not for otherwise directed (ie: no cultivation under trees to be retained) AS3743-2003 ‘Potting Mixes’ pressure sprinkler irrigation system to all landscaped areas shown on the drawings internal to the site only, to
construction or certification purposes. Provide certification of soil types delivered to site, as per AS3743-2003. Noosa Shire Council approval. The irrigation shall meet the following performance requirements and as per the
SOIL: manufacturers and/or installers specifications: ANDREW GOLD LANDSCAPE ARCHITECTURE
B. CIVIL WORKS INFORMATION Spread turf underlay topsoil to a minimum depth of 100mm unless otherwise directed. Proposed topsoil must TOPSOIL AERATION AND DECOMPOSITION: • Summer target application of 32mm
comply with Australian Standards AS4419-2003 and described as 'Soil blend'. Contractor must allow to maintain finished levels allowing for potential slumping and subsidence. Tamping • Fully automatic and metered PO BOX 5220
Refer to Civil Engineer's drawings for all information contained within these documents related to and MT GRAVATT EAST
nominated as Civil Works. Civil Works information contained within these documents are indicative only and not down and light wetting up of soil during placement on podium to ensure air pockets and voids are managed out. • Recycled water use (from rainwater tanks)
TURF: • Commercial quality fittings and fixtures QLD 4122
for construction or certification purposes.
To be fundamentally free from weeds and disease or other deleterious substances. FERTILIZER: • Mainlines
C. STRUCTURAL WORKS INFORMATION • On road reserve: Use "Wintergreen" Ensure soil nutrient and PH levels are suitable for specific plant species (ie. native or exotic species) • Dripline system under mulch T 07 3420 0006
Refer to Structural Engineer's drawings for all information contained within these documents related to and • Within subject site: Use "Sir Walter" Apply appropriate slow release fertilizer (ie. native / exotic species) to each plant as per manufacturer's • RPZ backflow prevention device M 0405 389 243
INSTALLATION: recommended rates. E [email protected]
nominated as Structural Works. This includes retaining walls. Structural Works information contained within
these documents are indicative only and not for construction or certification purposes. Turf shall be close turfed with staggered cross-joints and laid in straight lines, running perpendicular to the A slow or controlled release fertiliser organic or inorganic to be incorporated generally into the imported (or All design and documentation, materials supplied and work carried out should be in accordance with the current
direction of slope (and/or parallel to contours). excavated / site topsoil). We recommend the following: relevant Australian Standards and best practice.
D. ELECTRICAL WORKS INFORMATION Proposed topdressing soil to comply with Australian Standards AS4419-2003 and as described as
Refer to Electrical Engineer's drawings for all information contained within these documents related to and 'Topdressing'. Inorganic Slow or Controlled Release fertilisers: GENERAL NOTES:
nominated as Electrical Works. Electrical Works information contained within these documents are indicative All joints shall be filled with an approved topdress light soil or sand and the turf shall be lightly rolled. • Osmocote • All materials and worksmanship shall be to the relevant Australian Standards.
and not for construction or certification purposes. Finished levels shall be 3mm below surrounding surface levels to allow for future top dressing. Allowance • Nutricote • Where pipe work shown running parallel under paved surfaces, has been done so for clarity purposed only.
should be made for shrinkage and settling. • Macrocote • All pipe work is to be installed within soft landscaped areas only where possible.
E. HYDRAULIC WORKS INFORMATION Turf shall be adequately watered once installed, refer Management Plan/s. • E-Scape PRO by eCo-Enviroment • Pipe hops over mainlines not shown. All connections to mainlines only to solenoid valve locations.
Refer to Hydraulic Engineer's drawings for all information contained within these documents related to and Ensure protection from trampling. • Contractor shall undertake the radius adjustment of all rotor sprinklers as required.
nominated as Hydraulic Works. Hydraulic Works information contained within these documents are indicative Lay turf within 36 hours of being cut. Organic slow release: • For all sprinkler heads to back of road kerbs, water supply lateral to be installed minimum of 500mm off
only and not for construction or certification purposes. • Dynamic Lifter back of kerb.
FERTILISER: • Organic Link by Plant of Health • All pipe work under concrete paving to be installed in sleeves.
Fertiliser to be applied to the turf at the rates and period of time from installation as recommended by the • All pipe work under removable paving may be pre-laid prior to paving works.
LANDSCAPE SPECIFICATION NOTES • All pipe work under retained area to be pre-laid prior to retaining wall construction.
supplier. If no starter Fertiliser supplied by the supplier, we recommend: PLANTING:
Dynamic Lifter Turf Starter: To locations as shown on the plan and to the sizes and numbers as shown on the schedule. • Irrigation mainline alignments in verges to be in standard alignment zone for trees i.e. 2.5m to 3m from
LEVELS - GENERAL NOTES
http://www.yates.com.au/products/fertilising/organic-based/dynamic-lifter-turf-starter/#tbCQXOZuFJZ01z1B.97 property boundary,unless otherwise noted.
Lawn Builder™ Seed & Turf Starter Slow Release Lawn Fertiliser: INORGANIC MULCH: • Cross-stacking of pipe fittings is not allowed.
When setting out lines and levels ensure the accurate formation of grades and crossfalls leading to drains to
https://www.scottsaustralia.com.au/scotts-brands/lawn-builder/lawn-builder-slow-release- Where specified, spread River Washed 'Coastal Mix' to a minimum depth of 100mm entirely over planting bed • Lateral pipe work routed parallel to mainlines shall not be installed directly above mainlines. Laterals must be
enable surplus water to reach the drainage system and to prevent potential erosion channels. Ponding is
lawn-fertilisers/lawn-builder-seed-turf-starter-slow-release-lawn-fertiliser/ areas, unless otherwise shown in the details.. horizontally offset by a minimum of 300mm from mainlines.
unacceptable.
• All pipe work shall be routed around any existing trees and no closer than tree canopy 'drip line'. All tree
SOIL WETTING AGENT: DRAINAGE CELLS: roots smaller than 50mm diameter which are damaged during excavation shall be cleanly cut with a saw or
Minimum crossfalls are as follows:
We recommend the application of a soil wetting agent wetting agent (ie: non biodegradable detergent not Use drainage cells to podium planters secateurs. Any tree roots 50mm or greater encountered are not to be damaged and pipe trench shall be
• Paving and artificial grass 1:75
crystals) to stop hydrophobia if not already in the starter fertiliser supplied with the turf, at the rates hand-excavated, thrust bored (plunked) or air-drilled (either pressure and/or suction).
• Grassed and mulched garden areas 1:50
recommended by the manufacturer: Horizontal Application: • A minimum length of 200mm of pipe shall be provided between fittings in lateral pipe work.
• Scotts Hydraflow Wetta Soil Install VersiCell 30mm (https://elmich.com.au/products/versicell-subsoil-drainage/) or similar drainage cell, • Please note that this drawing is to be read in conjunction with the detail drawing and the specifications.
Maximum crossfalls are as follows:
• Searle’s Penetraide installed to manufacturer’s recommendations.
• Paving 1:40
• Plant of Health Soils Soaker Ensure all corners and sharp edges are removed and tapped to avoid damaging the waterproof membrane. WATER BUDGET AND CONSUMPTION NOTES
• Grassed areas 1:5
Apply final layer of geofabric/ filter fabric (refer below) over entire drain cell area. Lap material minimum 400mm • Irrigation area is for current project works stage only and is approximate. The area has been calculated from
• Mulched garden areas 1:3
WEEDS, PESTS DISEASE MANAGEMENT: at junctions or joins. Turn fabric up walls and service risers minimum 300mm. Ensure neat holes cut in around the valve data able as a function of flow rate and nominal precipitation rate.
Weeds are required to be removed by physical or chemical (non-residual Glyphosate or other herbicides) services with minimum 15mm clearance. • Operator to be aware of any water usage restrictions which may be applicable, such as total exclusion
Finish organic mulch surfaces adjacent paving surfaces and / or edging. Finish lawn surfaces flush with
means. If chemical means, as per the manufacturer recommendations. Refer to the following reference for periods (e.g. June to August inclusive) and/or restrictions on the number of cycles per week (e.g.
adjacent paving surfaces and / or edging. Ensure adequate falls in finished surface levels away from buildings
guideline on weeds, pest and disease management Vertical Application (to planter walls): groundwater - 3 cycles per week, potable scheme water - 2 cycles per week).
to drainage collection points (eg, field inlets, etc).
Install to manufacturer's specifications to all podium planter garden bed walls over 400mm in height. Lapping
REFERENCE: joins and junctions by minimum 100mm. PLANT ESTABLISHMENT / CONTINUING MAINTENANCE
SUBSOIL DRAINAGE - GENERAL NOTES
http://thelawnguide.com.au
GEOFABRIC: Allow a 12 WEEK for internal landscape and 12 MONTH for Streetscape for Plant Establishment Period from
Ensure adequate subsoil drainage elsewhere by installing suitable agricultural drainage systems where
STREET TREE IN TURF Install Filterwrap (https://www.geofabrics.co/products/filterwrap™) as per Geosystems Australia details and Practical Completion to the satisfaction of the Landscape Architect.
necessary, and especially in areas subjected to site excavation works including retaining walls.
specifications. • Maintain adequate watering regime
ORGANIC MULCHING • Remove weed growth from all mass planting beds and turfed areas
Lay subsoil drains in: -
Proposed mulch must comply with Australian Standards AS4454-2003. Spread Aged Forest Mulch to a VOID FILLER: • Keep landscape areas tidy and free of litter and debris
• Garden beds that are adjacent to buildings surrounded on all sides by pavements or in any garden
minimum depth of 100mm. Install polystyrene blocks cut to size to podium planters as shown on details. Contact Polystyrene Products (or • Fertilise (as per the notes above)
beds where water is likely to pond;
similar) for space fillers. Ensure geofabric is installed over, to separate soil media from the polystyrene product. • Weed control (as per the notes above)
• In any grassed areas where water is likely to sit and be unable to disperse quickly
Mulch shall be free from material such as stones, clay lumps, sticks, tree roots, rubbish, rubble or any other (https://www.polystyreneproducts.com.au) • Prune planting, control pest and disease management (as per the notes above) to maintain healthy growth
• Behind retaining walls and raised kerbs
deleterious material. • Replenish mulch material where necessary
• In locations as shown on the drawings
IRRIGATION: • Replace dead / dying plant material
PLANTING BEDS Ensure irrigation is provided as per specification. • Reinstate stakes, ties and marker stakes where necessary
Unless otherwise specified, all subsoil drains shall be corrugated, 90mm slotted PVC contour pipe, wrapped in
• Reinstate erosion control matting and other erosion control measures as necessary
Bidum V14 filter cloth or equal equivalent. Filter gravel to be 10mm clean washed aggregate. Lay drainpipe in
SUBGRADE PREPARATION: GRAVEL • Make good any disturbance to surfaces and mulch
continuous lengths where possible with minimum 1:100 falls. Discharge pipes into stormwater system.
Cultivate subgrade surface by thoroughly ripping to a minimum depth of 150mm before spreading topsoil.
Install feature gravel to a minimum of 75mm in the locations as indicated on the drawings. Continue maintenance works beyond Plant Establishment Period as required.
Where grades are not sufficient to carry water out of the landscape area adequately and safely, supply and
TOPSOIL:
install drainage sump/ to catch excess water.
Spread topsoil to a minimum depth of 300mm unless otherwise directed. Proposed topsoil must comply with Supplier: Centenary Landscaping Supplies Ph (07) 3373 4999 or equal approved. MANAGEMENT PLAN/S:
Australian Standards AS4419-2003 and described as 'Soil blend'.
Sumps are to be fitted with a heelguard no-slip grate and connected to the stormwater system. Refer to
Provide certification of soil types delivered to site, as per AS4419-2003. Gravel to be River Washed Gravel 'Coastal Mix'. The turfed areas shall be throughly watered on the day of turf installation and then as follows at the equivalent
Hydraulic and Civil Engineer’s drawings for drainage pit specifications and connections.
of 5l/m², including natural rainfall, or as required to maintain active healthy growth.
PLANTS: Ensure filter fabric is installed to manufacturer's specification under the gravel (over the topsoil).
EXISTING TREE/S
Mature tree stock shall be properly prepared for transport with adequate measures taken to protect against Weeks 1-3: Twice a week
shock and wind damage. Gravel is subject to client approval. Weeks 3-12: Once a week or as necessary
Protect from damage all trees which are shown to be retained, are beyond the limits allowed to the Contractor,
Ensure sequencing with site foreman to avoid delays planting mature tree stock.
or need not be removed or damaged for construction operations.
CONCRETE GARDEN EDGE If no irrigation, apply the above rates to the mass planting beds. Watering to use rainwater tanks if possible.
FERTILIZER:
Prior to commencement of any works, Tree Protection Fencing is to be erected around the tree/s. The VPF
Ensure soil nutrient and PH levels are suitable for specific plant species (ie. native or exotic species) Supply and install concrete edging in the locations and extents as shown on the drawings and as detailed. SPECIAL NOTE
(Vegetation Protection Fence) shall comprise 1.8m high temporary chainwire fence and signage in accordance
Apply slow release fertilizer to each plant as per manufacturer's recommended rates.
with AS4970 Protection on Trees on Development Sites. This barrier should be monitored and maintained on a
A slow or controlled release fertiliser organic or inorganic to be incorporated generally into the imported (or Ensure construction joints at max 1800mm centres and/ or at changes of curvature/ direction. Accord particular diligence to the following prime items:
regular basis and remain in place until the completion of the works.
excavated / site topsoil). We recommend the following:
Flush concrete edge – 100 x 100mm concrete edge with pencil round profile. Concrete edge is to finish flush TOPSOIL QUALITY and SUBGRADE PREPARATION as specified.
Tree protection fencing needs to be reinstated following any inspection or works supervised by the arborist
Inorganic Slow or Controlled Release fertilisers: with adjoining surfaces.
under trees to be protected.
• Osmocote PLANT QUANTITY: Use only consistently well nurtured nursery stock from an approved supplier. Check with
• Nutricote SPADE CUT GARDEN EDGE Landscape Architect where species substitutions must be made.
There is to be no filling, dumping, excavation works, or stockpiling of materials inside tree protection area or
• Macrocote
within the dripline of trees to be retained except as approved by the Project Arborist for the purpose of
• E-Scape PRO by eCo-Enviroment Install to the locations as indicated on the drawing and as per the details. MAINTENANCE: Ensure a continuing maintenance program, including weed/disease, fertilising, watering (but
construction.
beware of over-watering) and replacement of ailing plant material.
Organic slow release: IRRIGATION CONDUITS
Any works within the tree protection area involving motorised equipment, digging, pruning or raking are only to
• Dynamic Lifter GUARANTEE
be performed in accordance with the written direction of the Project Arborist.
• Organic Link by Plant of Health To the locations as shown on the drawings. To be PVC pipe 80mm dia. Failure to adequately address these items, best practice and relevant Australian Standards WILL result in a
sub-standard landscape outcome.
Hand digging and tunneling is to be carried out wherever necessary, generally to avoid cutting roots greater
than 50mm in diameter, and especially within the tree drip zone. Where necessary, damaged roots should be WETTING AGENT:
saw cut back to a clean cut.Trenches dug under the tree drip zone are to remain open for as short a time as A wetting agent and / or soil ameliorant including a wetting agent is required to all mass planting beds:
possible. • Scotts Hydraflow Wetta Soil
• Searle’s Penetraide Plant of Health Soils Soaker
Disturbed areas are to be carefully backfilled, consolidated and watered to eliminate voids. • Multipro by eCo-Enviroment
Trees specified to be retained and requiring arboricultural works shall be treated by a qualified Arborist PLANTING:
compliant with AS4373 Pruning of Amenity Trees. A suitably qualified arborist (ACF Level 5 min.) will be To locations as shown on the plan and to the sizes and numbers as shown on the schedule.
required to undertake any pruning works and will be nominated or approved by the Superintendent or his/her B 14/03/24 SUBMISSION TO NSC
representative. ORGANIC MULCHING: A 01/03/24 DRAFT FOR REVIEW
Proposed mulch must comply with Australian Standards AS4454-2003. 'Composts, soil conditioners and
mulches'. Spread an even cover of 1" Hoop Bark to a minimum depth of 100mm entirely over planting bed
PLANTS ISSUE DATE REASON
areas where organic mulch is specified.
Rake smooth to finish flush with surround levels. Do not place in contact with stems of plants.
• NATSPEC shall apply to trees where Council requires this certification.
Any mulch used must be free of peanut shell or other irritant material. THIS DRAWING HAS BEEN PREPARED WITH ALL CARE FROM BASE INFORMATION AVAILABLE
• Trees must meet AS 2303:2018 Tree Stock for Landscape Use AT THE TIME OF PREPARATION. ALL EXISTING AND RETAINED ELEMENTS ARE SHOWN
• Plants are to be good quality nursery stock from a NIASA Accredited nursery INDICATIVELY ONLY. THE LOCATION OF THESE ELEMENTS ARE BASED FROM SURVEY
• They shall be fundamentally free of pest and diseases, vigorous, well established, hardened off, of good form INFORMATION. ALL PLANS AND DETAILS ARE TO BE READ IN CONJUNCTION WITH ALL
RELEVANT CONSULTANT'S DOCUMENTATION PACKAGES, INCLUDING (BUT NOT LIMITED TO)
consistent with species or variety, not soft or forced with large healthy root systems with no evidence of ARCHITECTURAL, CIVIL, STRUCTURAL, HYDRAULIC, ELECTRICAL, LIGHTING AND SIGNAGE
having been restricted or damaged. Trees shall have a single leading shoot. DOCUMENTATION. ALL ABOVE AND BELOW GROUND SERVICE LOCATIONS ARE SHOWN
• Provide plants of a height and spread appropriate to the specified pot size and species. INDICATIVELY. REFER TO THE RELEVANT ENGINEERS DRAWINGS AS REQUIRED. ALL
DIMENSIONS ARE TO BE VERIFIED ON SITE.
• Mature tree stock shall be properly prepared for transport with adequate measures taken to protect against
shock and wind damage.
• Ensure sequencing with site foreman to avoid delays planting mature tree stock.
• After installation they shall be thoroughly watered.
• Trees to be single-trunked canopy shade tree species able to attain a clear trunk height of 1800mm on
maturity.
PROPOSED DUPLEX
11 MARGIT CRESCENT,
SUNRISE BEACH
LANDSCAPE NOTES
JOB No. DWG No. ISSUE DRAWN BY CHECKED BY
24.040 001 B PD/ DS AG
NOT FOR CONSTRUCTION
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalLog in to download the original file
The download may take up to a minute.