Council archive · source document
Development Application Part 2 - Environmental & Stormwater Management Plans · OPW11/0335
Plans and drawings: the text below has words only, no drawings.
Very large file (49.6 MB): may take a few minutes to open.
9. MONITORING AND EVALUATION OF WATER QUALITY AGAINST TARGETS
A draft water quality monitoring program has been developed to measure the performance of
the proposed stormwater treatment train against targets (Table 1). The objective of the
monitoring program is to quantitatively show whether or not the nominated water quality targets
are being met.
The key water quality indicators are total suspended solids, total nitrogen, total phosphorus and
pH (Table 1). Other relevant water quality parameters include microbiological parameters
(faecal coliforms, Escherichia colt), chemical and physical parameters (dissolved oxygen,
turbidity), and herbicides if they are used within the development site. The following water
quality indicators are recommended (Table 10):
• Microbiological: Faecal coliforms, Escherichia coli
• Physical: Biological Oxygen demand, dissolved oxygen, suspended solids, turbidity,
pH;
• Chemical: Total suspended solids, total nitrogen, total phosphorus; and
• Herbicides: If herbicides are used to control weeds on the development site, then
they should be included in the suite of water quality indicators.
Table 10: Summary of Test Methods for Ambient Surface Waters
S&B
Internal
Sample Preparation
Parameter Test Sample Analysis Method
Method
Method
Number
WC250 &
Nutrients - total Heated persulphate digestion SEAL A02 discrete analyser
WC270
E coli WB302 Membrane filtration EC Broth or EC-MUG medium
Faecal coliforms WB302 Membrane filtration M-FC Agar
BOD5 WC265 Incubation Membrane electrode in Wheaton Bottles
Suspended solids WP100 Membrane filtration Gravimetric
Dissolved oxygen F260 None Membrane electrode
pH F090 None Membrane electrode
Turbidity F170.1 None Photometer
Herbicides 00022 Solvent extraction #GC/MS
#GCMS - Gas Chromotograph/Mass Spectrometer
It is recommended that the water quality of the terminal wetland is represented by four (4)
sampling points per sampling event (i.e. 4 spatial replicates): two (2) from the Constructed
Wetland System and two (2) more from the heath on the west of the terminal wetland (adjacent
to Noosa National Park). The recommended sample points are indicated in Table 11, which
lists the location of sample points during the construction phase and the operational phase.
Monitoring needs to commence during the construction phase, and continue during the
operational phase.
02011 Simmonds & Bristow Ply Ltd Pacific Plumbing - Scanlon Property Group Pty Ltd J-1109-155 - 8 September 2011
I %CLIENTFILES%Contrast Consvwbons\1109-ISSc - Essence of Peregian SCEP Stage 1 UpdaI W9_Outpul OocumentsU-1109-155c_SMP Scanbn Property
Group SECP_ge_ta_ 11090S.d0c Page 14 of 21
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalUsed in these records
Development Application Part 2 - Environmental & Stormwater Management PlansRelated documentApplication case desk ↗
About this file
- File size
- 49.6 MB (very large file)
- File type
No other editions are linked here.
Original file
Log in to download the original file
The download may take a few minutes. On mobile data, it is best to wait for Wi-Fi.