Reference Document OPW19 0098 Acid Sulphate Investigation · OPW19/0098

 

 

 

EXPLANATION OF NOTES, ABBREVIATIONS & TERMS
:. USED ON BOREHOLE AND TEST PIT REPORTS

 

DRILLING/EXCAVATION METHOD

AS* Auger Screwing RD Rotary blade or drag bit HQ Diamond Core - 63 mm

AD* Auger Drilling RT Rotary Tricone bit NMLC Diamond Core - 52 mm

vv V-Bit RAB _ Rotary Air Blast NQ Diamond Core - 47 mm

‘T TC-Bit, e.g. ADT RC __ Reverse Circulation BH Tractor Mounted Backhoe
HA Hand Auger PT Push Tube EX Tracked Hydraulic Excavator
DTC _Diatube Coring cT Cable Toot Rig EE Existing Excavation

WB Washbore or Bailer JET Jetting HAND Excavated by Hand Methods

 

PENETRATION/EXCAVATION RESISTANCE
L Low resistance. Rapid penetration possible with little effort from the equipment used.
M Medium resistance. Excavation/possible at an acceptable rate with moderate effort from the equipment used.

H ‘High resistance to penetration/excavation. Further penetration is possible at a slow rate and requires
significant effort from the equipment.

R Refusal or Practical Refusa!. No further progress possible without the risk of damage or unacceptable wear to
the digging implement or machine.

These assessments are subjective and are dependent on many factors including the equipment power, weight, condition
of excavation or drilting tools, and the experience of the operator.

 

 

 

 

 

 

 

 

 

WATER .
YW Water level at date shown <j Partial water loss
c= Water inflow ~<q Complete water loss
GROUNDWATER NOT The observation of groundwater, whether present or not, was not possible due to drilling
OBSERVED ‘water, surface seepage or cave in of the borehole/est pit.
GROUNDWATER NOT The borehole/test pit was dry soon after excavation. However, groundwater could be
ENCOUNTERED present in less permeable strata. inflow may have been observed had the borehole/test pit
been left open for a longer period.
SAMPLING AND TESTING
SPT Standard Penetration Test to AS1289.6.3.1-1993
47,11 N=18 4,7,11 = Blows per 150mm. _N = Blows per 300mm penetration following 150mm seating
30/80mm Where practical refusal occurs, the blows and penetration for that interval are reported
RW Penetration occurred under the rod weight only
HW + Penetration occurred under the hammer and rod weight only
HB Hammer double bouncing on anvil
DS Disturbed sample
BDS Bulk disturbed sample
G Gas Sample *
Ww Water Sample
FP Field permeability test over section noted >
FV. Field vane shear test expressed as uncorrected shear strength sy
PID . Photoionisation Detector reading in ppm
PM - Pressuremeter test over section noted
PP Pocket penetrometer test expressed as instrument reading in kPa
U63 Thin wailed tube sample - number indicates nominal sample diameter in millimetres
Ranking of Visually Observable Contamination and Odour (for specific soil contamination assessment projects)
R=0 No visible evidence of contamination R=A No non-natural odours identified
R=1 Slight evidence of visible contamination R=B Slight non-natural odours identified
R=2 Visible contamination R=C Moderate non-natural odours identified
R=3 Significant visible contamination R=D Strong non-natural odours identified
ROCK CORE RECOVERY 4
TCR = Total Core Recovery (%) SCR = Solid Core Recovery (%) RQD = Rock Quality Designation (%)
= Length of core recovered , gq _ Length of cylindrical core recovered , |, _ Axial langths of core > 100mm 149
Length of core run Length of core run Length of core run

 

 

GAP Form No. 6
. RL3