Council Report - MCU25 0118 (As Published) · MCU25/0118

               PLANNING & ENVIRONMENT COMMITTEE MEETING REPORT                                 10 FEBRUARY 2026


                      Street Identification
               10.    The street address of the development must be clearly visible and discernible from the
                      primary frontage (eastern frontage) of the site by the provision of a street number and, where
                      appropriate, the building name.
                      Water & Sewer Connections
               11.    An underground connection to reticulated water and sewerage must be provided to the
                      premises in accordance with the standards and requirements of Northern SEQ Distributor–
                      Retailer Authority (Unitywater).
               12.    A Certificate of Completion from the Northern SEQ Distributor–Retailer Authority (Unitywater)
                      must be submitted to Council that certifies an underground connection to reticulated water
                      and sewerage has been provided to the premises.
                      Building Appearance
               13.    External design features, materials and finishes must be as shown on the Approved Plans,
                      with no inclusions or alterations made without approval in writing by Council.
               14.    External finishes of the building must be a mix of lightweight and textured external finishes,
                      with masonry areas incorporating a variety of textured finishes to break up the surface.
               15.    All deck and balcony areas must not be enclosed with shutters, louvres, glass panelling or
                      the like thus remaining as open structures.
               16.    External colours and finishes must be of an understated colour scheme and low-reflective
                      roofing and cladding materials.
               17.    All air conditioning units or other mechanical equipment must be fully enclosed or screened
                      such that they are not visible from the street frontages nor adjoining properties.
               18.    Waste storage areas, clothes drying areas and external storage areas must be screened
                      from view of the street.
               19.    Each unit must be provided with access to an outdoor clothesline which is screened from
                      public view (external to the development site) and where achievable, internal to the
                      development.
               20.    A privacy fence must be constructed along the southern and western boundaries and must
                      not exceed 2 metres in building height.
                      Waste Management
               21.    A waste storage area must be provided in accordance with Planning Scheme Policy 9, Waste
                      Management and the Noosa Plan’s Waste Management Code, including an external
                      imperviously paved area correctly sized for all refuse and recycling containers and suitably
                      screened from public places and neighbouring properties.
               22.    A waste storage area must be designed and maintained in accordance with Planning
                      Scheme Policy PSP9 Waste Management and the Noosa Plan’s Waste Management Code.
                      The waste storage area must be:
                      a.      imperviously paved and correctly sized for all refuse and recycling containers;
                      b.      bunded and graded so that wastewater and bin leakage drain to the sewer;
                      c.      provided with a conveniently located hosecock and backflow prevention device,
                              connected to a water supply to service the area; and
                      d.      roofed or otherwise covered.




Document Set ID: 24496425
Version: 5, Version Date: 29/01/2026