Development Application - Part 1 of 2 - IDAS Forms 1 & 6 - OPW13/0066

A statement about how the proposed development addresses the local                  D Confirmed
government’s planning schemes and any other planning documents relevant
to the application.


Applications for building work (including extensions and assessable demolition)
Floor plans drawn to an appropriate scale (1:50,1:100 or 1:200 are                  D Confirmed
recommended scales) which show the following:
                                                                                    D Not applicable
.   the north point
.   the intended use of each area on the floor plan (for commercial, industrial
    or mixed use   developments only)
.   the room layout (for residential development only) with all rooms clearly
    labelled
.   the existing and the proposed built form (f r extensions only)
.   the qross floor area of each proposed floor area.

Elevations drawn to an appropriate scale (1:100,1:200 or 1 :500 are                 D Confirmed
recommended scales) which show plans of all building elevations and
                                                                                    D Not applicable
facades, clearly labelled to identify orientation (e.g. north elevation).

Plans showing the size, location, proposed site cover, proposed maximum             D Confirmed
number of storeys, and proposed maximum height above natural ground
                                                                      level
                                                                                    D Not applicable
of the proposed new building work.

Plans showing the extent of any assessable demolition.                               D Confirmed
                                                                                     D Not applicable
Applications for operational work involving earthworks (filling and excavating)

drawings showing:                                                                    D Confirmed
.   existing and proposed contours                                                   D Not applicable
.areas     to be cut and filled
.   the location and level of any permanent survey marks or reference
    stations used as datum for the works
.   the location of any proposed retaining walls on the relevant land and their
    height
 .  the defined flood level (if applicable)
 .  the defined fill level (if applicable).

Applications for operational work involving roadworks

 Drawings showing:                                                                   D Confirmed
 .  existing and proposed contours                                                   D Not applicable
 .  the centreline or construction line showing chainages, bearings, offsets if
    the construction line is not the centreline of the road and all intersection
    points
 .  information for each curve including tangent point chainages and offsets,
                  length,
    curve radii, arc       tangent length, superelevation (if applicable) and
    curve widening(if applicable)
 .kerb lines including kerb radii (where not parallel to centreline)
                                                                     and

  tangent point changes (where     not parallel to centreline)
 .  edge of pavement where kerb is not constructed
 .   position and extent of channelisation
 .   location and details of all traffic signs, guideposts, guardrail and other
     street furniture
 .pavement markings including details on raised pavement markers
 .catchpit, manhole and pipeline locations


 .drainage details (if applicable)
 .cross road drainage culverts (if applicable)



3                                                  IDAS form 6-Building or operational work assessable against a planning scheme
                                                                                                   Version 2.017 December 2012