Whsmp · OPW16/0021

 

 

 

ULTIMATE POSITIONING GROUP PTY LTD
UPG ABN 12 135 812 903
33 Allison Streat
yp Bowen ills OLD 4006
P +617 3851 e300

F464 7 3282 1278
—E OLDoffice Bupgsoiutions com

 

Calibration Certificate

Trimble S6 3” DR Plus Total station with serial number 931 1 1394 was tested on the
30 June 2015 and complies with Trimble’s manufacturer specifications:

 

MANUFACTURERS SPECIFI CATION

Angle Measurement

Accuracy (Standard deviation based on DIN 18723): 3“
Automatic Level Compensator dual-axis with a working range of: +54?

Distance Measurement
ohlance Measurement

Accuracy SDV (without Reflector) according to ISO 17123-4 +2mm +2ppm
Accuracy SDV (with Reflector) according to ISO 17123-4 + 2mm +2ppm

UPG confirms the instrument mentioned was tested over established baselines at our T; timble Certified Service
Centers (TCSC), which are regularly checked using a Total Station calibrated at a NATA certified Government
baseline. As UPG baselines are regularly checked but are not a registered baseline, if required by your state
regulations, further checking at a Government Registered Baseline is recommended.

Trimble Certified Service Center. UPG will not assume liability after the unit has been transported from UPG’s
TCSC should the instrument lose calibration.

Trimble is a Quality Assured Company and is registered as a supplier under SS-EN ISO 9001.
UPG Service Centres work to AS/NZS ISO 10012:2004 guidelines, traceable to the National Standard,

All instruments are recorded under serial number and date of testing.

 

 

 

 

Yours faithfully,
Kenny Chu
www.upgsolutions.com Trimble.

Brisbane « Rockhamptori « Townsville « Sydney © Wollongong « telbourne « Adelaide * Darwin * Hobart « PNG