response to information request 17 bottlebrush · MCU26/0001

3. Revise plans demonstrating compliance with the building height provisions of the
   Zone Code. This may include but is not limited to:
      a. Reduce the number of storeys.
      b. Clearly detail finished ground level on elevation plans. This will allow for
          accurate measurement of the building in regard to AO6.2 of the Zone Code.
      c. Remove the arbor from the rooftop terrace.
      d. Revise section plans to show ground level of adjoining properties, enabling
          assessment of wall and fence heights, and the potential impacts on
          neighbouring properties.

The survey is included as part of the application material with the design complying with the
12m height limit. The basement is also restricted to one entrance less than 6m wide and
backfilled on the sides to ensure the carparking area is not visible from neighbours and
backfilled around the visitor bay, so as not to be visually dominant when viewed from the
Bottlebrush Ave. A detailed landscape plan is also included with the proposal showing retention
of the mounded levels and planting of a feature bottlebrush in front of the development.

The arbor has been removed from the rooftop terrace and the lobby to the lift and stairwell does
not constitute a storey. The roofed pool equipment is also located on top of the stairs below
and does not constitute 4 storeys in this section. Additional detail is also provided of the
adjoining fences and finished heights to ensure landscaping is provided around fencelines and
edges of the building.




                                                                                  Page 3 of 5