Council archive · source document
STP24-0253 Application for Operational Works Fire Trail - 80 Cooyar Street Noosa Heads · OPW24/0125
Very large file (58.9 MB): the whole original can take several minutes to open, especially on a phone. Text is quick to read.
Original PDF page 348, section 1. The text section number identifies this passage in the reader.
Residual
Responsible
Rating
Initial
Proposed Controls
HOC
Risk
Risk
Activity Hazards
(1/Elimination 2/Substitution 3/Isolation 4/Engineering 5/Administration 6/PPE) Person
- fall arrest systems
Use of fall Fall from heights EXTREME 5 Personal fall protection systems or catch systems used on site will be in accordance with AS 1891.4 and the Competent Person
protection systems manufacturer’s instructions must be employed wherever work is conducted near an unprotected edge. Sec3 WMSHP
Activity planning and EXTREME 5 Where fall arrest systems are used a SWMS for the activity is the address task hazards and controls. Site Management
hazard identification Contract Partner
Competent Person
Training and EXTREME 5 Competency requirements relating to the use, installation, inspection and testing facets of fall protection equipment is to Contract Partner
instruction align with the Site Management
All workers required to use personal fall protection equipment are to be competent in the inspection, use and
maintenance of such equipment – completed a Work at Height training course.
Failure of equipment EXTREME 5 Inspection Requirements for fall arrest equipment: Site Management
Contract Partner
Additional maintenance and testing requirements -
Application Activity
Personal equipment including harnesses, lanyard Inspection by operator before and after each use
assemblies, connectors and fall-arrest devises including
common use devices.
Fall arrest devices (external check only) 3 monthly inspections by a competent person
Belts, harnesses, lanyard assemblies and associated 6 monthly inspections by a competent person
personal equipment
- Permanently installed anchorages. 12 monthly inspection/ service by competent person.
- Fall-arrest devices (full service including dismantling
where indicated).
- Horizontal lifelines and rail, including integral
components and permanently installed mobile
attachment devices.
Fall from heights EXTREME 5 The following types of anchorage points are to be installed or verified for a fall arrest system: Site Management
Contract Partner
- engineer designed system.
- riggers pole attached to steel beam – installed by licensed rigger.
- anchor system or bracket that are designed by an engineer and installed by a suitable qualified person as per design.
- anchorage brackets attached to steel roofing material.
- anchorage bracket to framed steel structure.
- the above anchorage systems are installed by person that has completed a work safely at heights course
Project Hazard/Risk Assessment / Page 106 of 160
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalUsed in these records
STP24-0253 Application for Operational Works Fire Trail - 80 Cooyar Street Noosa Heads.pdfRelated documentApplication case desk ↗
About this file
- File size
- 58.9 MB (very large file)
- File type
No other editions are linked here.
Original file
Log in to download the original file
The download may take a few minutes. On mobile data, it is best to wait for Wi-Fi.