Development Assessment Report - 193 Sankeys · MCU25/0022

                                                                                                Proposed Development




Figure 5 Perspective of house



The dwelling is proposed to be constructed from typical materials and building methods and includes traditional
suspended floor on steel posts and sub-floor beams, steel frame and cladding, skillion roof as well as roofed balconies.
Further details on the dwelling house will be provided as part of the building approval process.

4.2       Shed
Figure 6 below shows the shed position relative to the rear property boundary, shared with 195 Sankeys Road property
(Lot 12 on RP216727) and demonstrates the sheds relationship with the existing features including the access track,
electrical easement and riparian buffer.
The shed is proposed to be located with an offset to the rear boundary of 4.6m which is less than the 10m specified in
the planning scheme. This location has been chosen as a best fit outcome given the existing constraints of the electrical
easement, access easement and riparian buffer zone. The Performance Outcome PO8 is addressed in Section 6.2.2 of
this report.
In terms of design, the shed is 12m in length by 8m wide and 5m in height consisting of slab on ground construction,
with retaining walls on both the upper and lower sides of the shed due to site constraints. See Figure 7.
In terms of access, the shed will utilise the existing access easement with minor earthworks to facilitate access to the
shed.




 DEVELOPMENT ASSESSMENT REPORT            Internal Ref. 2022026-RPT-001
 193 Sankeys Road, Federal                21 February 2025                                                            9
 Prepared for Lachlan Robins