Council archive · source document
MCU15/0095 Air Quality Assessment
APPENDIX A: GLOSSARY OF AIR QUALITY TERMINOLOGY
Conversion of ppm to Where R is the ideal gas constant; T, the temperature in kelvin (273.16
+ T°C); and P, the pressure in mm Hg, the conversion is as follows:
mg/m3
g m-3 = (P/RT) x Molecular weight x (concentration in ppm)
= P x Molecular weight x (concentration in ppm)
62.4 x (273.2 + T°C)
For the purposes of the air quality assessment all conversions were
made at 25°C.
g/s Grams per second
mg/m3 Milligrams (10-3) per cubic metre. Conversions from mg/m3 to parts per
volume concentrations (ie, ppm) are calculated at 25 °C as required by
the SEPP(AQM).
μg/m3 Micrograms (10-6) per cubic metre. Conversions from g/m3 to parts per
volume concentrations (ie, ppb) are calculated at 25 °C.
ppb Parts per billion.
ppm Parts per million.
PM10, PM2.5, PM1 Fine particulate matter with an equivalent aerodynamic diameter of less
than 10, 2.5 or 1 micrometres respectively. Fine particulates are
predominantly sourced from combustion processes. Vehicle emissions
are a key source in urban environments.
50th percentile The value exceeded for 50 % of the time.
NOx Oxides of nitrogen – a suite of gaseous contaminants that are emitted
from road vehicles and other sources. Some of the compounds can react
in the atmosphere and, in the presence of other contaminants, convert
to different compounds (eg, NO to NO2).
VOC Volatile Organic Compounds. These compounds can be both toxic and
odorous.
Page 30 of 30
Synergy Property Partners Pty Ltd- Air Quality Assessment - Proposed Service Station, 123 Eumundi-Noosa Road, Noosaville
/Network/Projects/4484/Reporting/4484 Report02.odt
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalUsed in these records
MCU15/0095 Air Quality Assessment.pdfRelated documentApplication case desk ↗
About this file
- File size
- 1.1 MB (small file)
- File type
No other editions are linked here.