VENTURE DRIVE LANDSCAPE PLAN Layout 3 (1)

 

 

LANDSCAPE MAINTENANCE SPECIFICATIONS LANDSCAPE PROPOSAL

Plant large screening shrubs and canopy trees to soften the 6m high concrete wall
Landscape works are to include the following: along the western boundary of the lot.

 

Trees near car parking areas shall be clear trunked to 1.2m
1. Organic mulch shall be spread around the plants to a depth of 150mm. All mulch is to be graded away from the trunk and planted at least 650mm away from the back of the kerb.
to avoid placement against green plant stems.
Mound planting beds slightly to improve drainage (falls are to be directed away from the building).
2. All new plantings with a pot size equal to or greater than 25 litre are to be tied and supported in accordance with the Provide hardwood timber edging between lawn areas and new planting beds.
NATSPEC SPECIFICATIONS and TYPICAL TREE PLANTING DETAIL (refer to Sheet 2).
Reinstate the existing garden bed on the verge, which is in a poor condition.
3. Plant quality shall be well presented, hardened-off NATSPEC approved nursery stock, grown in soil, well branched and well Replace one dead Banksia integrifolia with a new
foliated and true to species and variety. Trunks and branches shall be sturdy and uniformly distributed to form a well branched plant. Banksia integrifolia in 25 L (300mm) pot size. Eradicate all weeds und supply new mulch.
Scars shall be free from rot and pruning scars shall be clean cut to leave little or no protrusion from trunk or branch.

Leaves shall be normal size, shape and colour. PATHWAY MEL pai - ;
Ca Existing timber edge
4. Setting out of trees shall be in accordance with the detailed locations shown on the landscape plan. FIC) nod
El
5. All plantings must receive a slow release agri-form fertiliser tablet with water crystals. Existing Banksia integrifolia
6. Water thoroughly all planting stock and maintain incorporating best horticultural industry best practices. to be retained

7. Amaintenance period of 12 weeks includes monitoring of plant performance with remedial action as required.
Watering of plants and weeding as required .

1 dead Banksia integrifolia

to be replaced with a new healthy
Banksia integrifolia in 25 L
Existing Banksia integrifolia

to be retained

Existing timber edge

 

 

 

 

     

Existing

SCALE 1:100 BOLLARDS IN FRONT GARDEN

 

 

PROPOSAL:

SHRUBS AND GROUNDCOVER SHALL BE
PLANTED IN SUFFICIENT DENSITIES AND
ACHIEVE A NATURAL LOOK SIMILAR TO
THE PICTURES BELOW — PLANTS SHALL
NOT BE HEDGED IN ANY WAY.

 

 

Approx. location of street light

 

ing pedestrian path 1.5m wide

 

SCALE 1: 200

 

 

 

 

 

 

 

 

 

LANDSCAPE PROPOSAL

Install bollards to the front garden
as detailed below.

 

 

GRASS» CELLS

LOADIN
BAY

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

  

 

 

 

 

 

 

 

oe EXAMPLE OF A HARDWOOD TIMBER BOLLARD
- BY MOODIE OUTDOOR PRODUCTS.
Sor aeroMa vareBRArHICUA iw) INSTALL IN-SITU BOLLARDS AT 1.2m INTERVALS
2500 AS INDICATED ON THE LANDSCAPE PLANS SHEETS 1 & 3.
RETAIN A MINIMUM DISTANCE OF 500mm TO THE EDGES OF THE
SHRUBS WITH COLOURFUL LEAVES: 4 LOM con DRIVEWAY LOADING BAY AND THE DRIVEWAY,
CALLISTEMON ’GREAT BALLS OF FIRE & CROSS— BOLLARDS ARE TO BE 900mm HICH
DRIVEWAY OVER TO AND TO BE CONSTRUCTED WITH CONCRETE FOOTINGS
ENGINEER S TO ENGINEER’S SPECIFICATIONS & AUSTRALIAN STANDARDS.
DETAILS
5 BOLLARDS
Oo
1 90 ) Oo : ENVIRONMENTAL LANDSCAPE PLANNING. PROJECT: DRAWING TITLE: 3]
N © Principal: Mark Bizzell i OPERATIONAL WORKS LANDSCAPE | LANDSCAPE PLAN
Mount Coolum 4573 Qld -
N obi 0431 123 no AT No. 10 VENTURE DRIVE SPECIFICATIONS
LO con [email protected] L NOOSAVILLE, QLD DWG No._ LP - 03
ISSUE: A
CAL LJ | || Soprsonr: noreordusten oa rat SENT" GONSTRUCTIONS PTY LTD| SCALE:_AS SHOWN
i CU ana express written permission of the author. P DESIGNER: MB sree. soe