Council archive · source document
001511C5.001
Text sections not matched to the original PDF pages. See original document to check page numbers.
column 1 fel Seni wy4 Column 3
Specific Outcomes Probable solutions {if code assessable) Compliance
topography and minimise the need for cut and fill. a) Have a maximum distance of 3m between
the ground and the lowest part of the floor
of the building or the building incorporates
undercroft skirting or screening (eg. timber
battens) to the full height of any undercroft
area higher than 3m above ground level at
the perimeter of the building;
b) are of split level design that step down the
. slope or have suspended floor
construction;
c) limit the amount of cut or fill to less than
1.5m in depth; and
d) donot result in the spread of fill beyond
the footprint of the building and associated
batters.
Wall length and detailing
016 Within the Semi-attached Housing, §16.1 The maximum wall length is 15m; Complies -It is noted that there are four two storey
Attached Housing and Visitor Mixed Use Zones | AND blade walls approximately 3.5 metres in length that
buildings and other structures provide for visual $16.2 Wall planes incorporate design elements | do not have specific design elements. The rest of
interest and amenity by— to add visual interest and amenity, such as the building is well articulated and these walls
a) staggering or separating continuous walls _ | windows, pergolas, sun shading devices and provide strong vertical features for the building.
into smaller sections to vary the elevation; variations in balcony styles. These blade walls are to be treated in ‘feature
and Honed Polished blockwork’
b) providing well articulated building forms with
strong vertical design features.
Table Error! No text of specified style in document.-2 — For Multiple housing Type 2 - Duplex
column 1 column 2 Column 3
Specific Outcomes Probable solutions (if code assessable) Compliance
Built Form: __: , -
Garages and carports... :
O17 Garages, carport structures and vehicle $17.1 Where lock up garages are included— Complies
manoeuvring areas are designed and sited to— a) garages are stepped back a minimum of
a) provide for resident and visitor parking; 600mm from each other, in relation to the
b) visually integrate with the building and to not” frontage; and
dominate the street front; b) atleast one open visitor carpark is,
c) allow opportunity for landscaping to screen provided between the building and the
vehicle parking and manoeuvring areas; frontage and is not restricted by gates, ‘
_|d) — minimise the number of driveway accesses; security screens or other obstacles;
and ANDSee the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalUsed in these records
001511C5.001.pdfRelated documentPublic source context ↗
07/0799 - MCU - Multiple Housing Type 2 Duplex [As Published]Related documentApplication case desk ↗
About this file
- File size
- 4.5 MB (large file)
- File type
No other editions are linked here.
Original file
Log in to download the original file
The download may take up to a minute.