Original source · versioned page text
Appendix A - Proposal plans
Attached to the e-mail Change to Development Approval - 51994.1353.01.
Plans and drawings
This document appears to be plans or drawings. Its page text below holds only the words printed on the drawings, without the drawings themselves, so it may be jumbled or hard to follow. To see the plans as drawn, choose Original above or download the file (both need you to log in).
Log in to see the plans as drawn GRILL'D
SHOP5/50 HASTINGS STREET, NOOSA HEADS
ISSUE No. 1 2 3 4 ISSUE No.
CLIENT CLIENT CLIENT CLIENT
PURPOSE OF ISSUE APPROVAL APPROVAL APPROVAL APPROVAL PURPOSE OF ISSUE
DATE 10.04.17 03.05.17 24.05.17 31.05.17 DATE
CURRENT CURRENT
DRAWING No. REVISION DRAWING TITLE REVISION STATUS DRAWING No. REVISION DRAWING TITLE REVISION STATUS
DA0000 C ISSUE SHEET A B C D
DA0001 C FINISHES SCHEDULE - - C D
DA0002 C LOCATION & SITE PLAN A B C D
DA0003 C REFERENCE PHOTOS 1/2 - - C D
DA0004 C REFERENCE PHOTOS 2/2 - - C D
DA0005 C EXISTING PLAN A B C D
DA0006 C MATERIALS BOARD - - C D
DA0101 C LAYOUT PLAN - GROUND FLOOR A B C D
DA0102 C RCP - GROUND FLOOR - B C D
DA0111 C LAYOUT PLAN - PERGOLA ROOF - - C D
DA0112 C RCP - PERGOLA ROOF - - C D
DA0201 C SHOPFRONT ELEVATIONS A B C D
DA0301 C SHOPFRONT SCREENING DETAIL - - C D
client notes D 31.05.17 PL FOR CLIENT APPROVAL drawing drawing no.
GRILL'D • All works to be in accordance with the Building Code of Australia, Australian standards, statutory regulations and local authority requirements.
C 24.05.17 PL FOR CLIENT APPROVAL DA0000
• Do not scale this drawing. All dimensions to be verified on site prior to construction. Any inconsistencies to be reported to Giant immediately. If in doubt please
ask Giant for clarification.
ISSUE SHEET
• Any variation from these drawings requires written approval from Giant.
• This drawing has been produced to illustrate design intent. All shop drawings are to be submitted to and sanctioned by Giant prior to manufacture or B 03.05.17 PL FOR CLIENT APPROVAL scale NTS @ A3
project construction. Contractor to confirm structural integrity, stability and feasibility of all units/components prior to manufacture.
Design Consultants SHOP 5/ 50 HASTINGS STREET • Contractor to liaise with third party suppliers to confirm exact requirements, including electrical, data, comms & hydraulic requirements a & access points.
Ground Floor, 3 Little Collins St • Contractor to ensure consistency between similar materials is maintained.
A 10.04.17 PL FOR CLIENT APPROVAL drawn by PL checked by CW
Surry Hills NSW 2010 NOOSA HEADS • Copyright © Giant. This drawing is the property of Giant, design and copyright are reserved by them. The drawing is issued upon condition it is not copied,
reproduced, retained or disclosed to any unauthorised person either wholly or in part without the prior consent in writing of Giant. All rights reserved
T 8045 2950 E [email protected] issue date initials revision details client approval issue D
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalLog in to download the original file
Large file: the download may take up to a minute.
Searchable page text hides email addresses. Original files are unchanged and may show email addresses.
Full text of pages 2 to 12 (of 13)
Page 2
CODE ITEM DESCRIPTION/ FINISH LOCATION SUPPLIER NOTES
CONCRETE BLOCKS BESSER BLOCK CENTER - STEVEN ESTIMATED QUANTITY:
BR1 PADDINGTON SCREEN WALL BREEZE BLOCK. 295 x 295 x 90mm. STANDARD GREY. SCREENS, FACADE, BANQUETTES
(02) 9982 2536 - PADDINGTON:
* QUANTITY FOR REFERENCE ONLY
- ALLOW FOR BREAKAGE
EP1 EPOXY NON-SLIP EPOXY FLOORING WITH R12 RATING, COLOUR - TBC FLOOR - KITCHEN/BAR CONTRACTOR
FA1 GREEN & WHITE STRIPED FABRIC CUSTOM STRIPED FABRIC - TBC AWNING, PITCHED ROOF, UPHOLSTERY MATERIALISED - SAM FENTON SAMPLE TO BE APPROVED BY GIANT
0414 179 938 DESIGN PRIOR TO FABRICATION
FA2 BLUE FABRIC CUSTOM FABRIC - TBC AWNING MATERIALISED - SAM FENTON SAMPLE TO BE APPROVED BY GIANT
0414 179 938 DESIGN PRIOR TO FABRICATION
SILVER MIRROR FINISH
MI MIRROR WALLS WHERE NOTED CONTRACTOR
MIRROR PANELS ON SUITABLE SUBSTRATE, ANGLE TO ALL CORNER JUNCTIONS
ARROW METAL SYSTEMS - GRAHAM SAMPLE TO BE APPROVED BY GIANT
MT1 WELDED WIRE MESH DESIGN SIZE: 100x100MM, WIRE DIAMETER: 6MM WM1001006 SIGNAGE DESIGN PRIOR TO CONSTRUCTION
OLSSON (02) 9748 2200
WALLS & CEILING GENERALLY, KITCHEN
PN1 PAINT - WHITE SOUTHERN ALPES NZ9H1 - TO MATCH PC2 DULUX
PASS THRU BULKHEAD
PN2 PAINT - GREEN PENCARROW NZ10B9 - TO MATCH PC3 KITCHEN PASS THRU BULKHEAD DULUX
PC1 POWDERCOAT - BLACK BLACK MATT 260-9129M TABLE BASES & LIGHTBOX SIGNAGE DULUX
TABLE BASES, SCREENS & PERGOLA
PC2 POWDERCOAT - WHITE WHITE SATIN 272-1139S (DLX0315) DULUX
STRUCTURE AS NOTED
SHOPFRONT PLANTER BOXES,
PC3 POWDERCOAT - GREEN TRANSFORMER GREY GLOSS 984-32186 (DLX1016) DULUX
FURNITURE
PC4 POWDERCOAT - BLUE INTENSITY STORM SATIN 900-89584 (DLX0317) JOINERY & FURNITURE AS NOTED DULUX
FEATURE CEILING - TIMBER T&G PORTER'S ORIGINAL PAINT - PAMELA SAMPLE TO BE APPROVED BY GIANT
SP1 SPECIAL PAINT WOOD WASH, PLAIN WHITE DESIGN PRIOR TO CONSTRUCTION
PANELLING FITZPATRICK 0407 668 220
SS1 STAINLESS STEEL LINISHED FINISH, COMMERCIAL CATERING GRADE KITCHEN/BAR CONTRACTOR
ECO OUTDOOR - ASHLEY EVANS
ST1 STONE IRREGULAR CRAZY PAVING, 20mm, BLUESTONE FLOORING (02) 8976 2300
ECO OUTDOOR - ASHLEY EVANS
ST2 STONE BLUESTONE PAVERS SHOPFRONT ENTRY STAIRS
(02) 8976 2300
ECO OUTDOOR - ASHLEY EVANS
ST3 STONE FREE FORM, KORORA SHOPFRONT WALLS
(02) 8976 2300
DITO, WHITE, 12x92MM SKHEME - MARYLIN
TL1 TILE- KIT-KAT MOSAIC JOINERY & WALLS AS NOTED
GROUT: MAPEI - 136 ULTRACOLOUR PLUS (OR EQUIVALENT). GROUT LINES TO BE AS MINIMAL AS POSSIBLE 0424 696 624
DITO, TEAL, 12x92MM SKHEME - MARYLIN
TL2 TILE- KIT-KAT MOSAIC JOINERY & WALLS AS NOTED
GROUT: MAPEI - 136 ULTRACOLOUR PLUS (OR EQUIVALENT). GROUT LINES TO BE AS MINIMAL AS POSSIBLE 0424 696 624
BRASS + STONE, CARRARA C, 130 x 130MM, NON-RECTIFIED EDGES, HONED FINISH KITCHEN PASS COUNTER & WALLS AS SKHEME - MARYLIN PLAIN TILES ARE SOLD BY THE
TL3 TILE METRE. MIX TILES (WITH THE
GROUT: MAPEI - 103 ULTRACOLOUR PLUS (OR EQUIVALENT). GROUT LINES TO BE AS MINIMAL AS POSSIBLE NOTED 0424 696 624
BRASS STRIPE) ARE SOLD BY THE
PIECE. CONTRACTOR TO
CONFIRM QUALITIES
JAZZ BLACK GLOSS, 100 X 300MM SKHEME - MARYLIN
TL4 TILE KITCHEN WALLS AS NOTED
GROUT: MAPEI - 103 ULTRACOLOUR PLUS (OR EQUIVALENT). GROUT LINES TO BE AS MINIMAL AS POSSIBLE 0424 696 624
FOR INTERIOR USE. AMERICAN OAK OR TASMANIAN OAK. SEALED WITH MATT POLYURETHANE SEALANT JOINERY WHERE NOTED CONTRACTOR SAMPLE TO BE APPROVED BY GIANT
TM1 TIMBER
DESIGN PRIOR TO CONSTRUCTION
OUTDURE
TM2 TIMBER RESORTDECK BOARD, SEA SALT, 138 X 4880MM PARAPET PERGOLA STRUCTURE
02 9098 8250
TM3 TIMBER TONGUE & GROOVE PANELING, SPECIAL PAINT FINISH TO BE APPLIED CEILING WHERE NOTED CONTRACTOR
client notes D 31.05.17 PL FOR CLIENT APPROVAL drawing drawing no.
GRILL'D • All works to be in accordance with the Building Code of Australia, Australian standards, statutory regulations and local authority requirements.
C 24.05.17 PL FOR CLIENT APPROVAL DA0001
• Do not scale this drawing. All dimensions to be verified on site prior to construction. Any inconsistencies to be reported to Giant immediately. If in doubt please
ask Giant for clarification.
FINISHES SCHEDULE
• Any variation from these drawings requires written approval from Giant.
• This drawing has been produced to illustrate design intent. All shop drawings are to be submitted to and sanctioned by Giant prior to manufacture or - - - - scale NTS @ A3
project construction. Contractor to confirm structural integrity, stability and feasibility of all units/components prior to manufacture.
Design Consultants SHOP 5/ 50 HASTINGS STREET • Contractor to liaise with third party suppliers to confirm exact requirements, including electrical, data, comms & hydraulic requirements a & access points.
Ground Floor, 3 Little Collins St • Contractor to ensure consistency between similar materials is maintained.
- - - - drawn by PL checked by CW
Surry Hills NSW 2010 NOOSA HEADS • Copyright © Giant. This drawing is the property of Giant, design and copyright are reserved by them. The drawing is issued upon condition it is not copied,
reproduced, retained or disclosed to any unauthorised person either wholly or in part without the prior consent in writing of Giant. All rights reserved
T 8045 2950 E [email protected] issue date initials revision details client approval issue A
D
Page 3
N
N
SITE LOCATION (SHOWN PINK): NOOSA DRIVE
SHOP 5 / 50 HASTINGS STREET
NOOSA HEADS QLD 4567
TENANCY LOCATION (SHOWN PINK):
SHOP 5 / 50 HASTINGS STREET NOOSA
HEADS QLD 4567
LOCATION PLAN 1.0 SITE PLAN 1.0
NTS - NTS -
client notes D 31.05.17 PL FOR CLIENT APPROVAL drawing drawing no.
GRILL'D • All works to be in accordance with the Building Code of Australia, Australian standards, statutory regulations and local authority requirements.
C 24.05.17 PL FOR CLIENT APPROVAL DA0002
• Do not scale this drawing. All dimensions to be verified on site prior to construction. Any inconsistencies to be reported to Giant immediately. If in doubt please
ask Giant for clarification.
LOCATION & SITE PLAN
• Any variation from these drawings requires written approval from Giant.
• This drawing has been produced to illustrate design intent. All shop drawings are to be submitted to and sanctioned by Giant prior to manufacture or B 03.05.17 PL FOR CLIENT APPROVAL scale NTS @ A3
project construction. Contractor to confirm structural integrity, stability and feasibility of all units/components prior to manufacture.
Design Consultants SHOP 5/ 50 HASTINGS STREET • Contractor to liaise with third party suppliers to confirm exact requirements, including electrical, data, comms & hydraulic requirements a & access points.
Ground Floor, 3 Little Collins St • Contractor to ensure consistency between similar materials is maintained.
A 10.04.17 PL FOR CLIENT APPROVAL drawn by PL checked by CW
Surry Hills NSW 2010 NOOSA HEADS • Copyright © Giant. This drawing is the property of Giant, design and copyright are reserved by them. The drawing is issued upon condition it is not copied,
reproduced, retained or disclosed to any unauthorised person either wholly or in part without the prior consent in writing of Giant. All rights reserved
T 8045 2950 E [email protected] issue date initials revision details client approval issue D
Page 4
PHOTO ABOVE SHOWS EXISTING SHOPFRONT (NOOSA DRIVE) - FROM WEST PHOTO ABOVE SHOWS EXISTING SHOPFRONT (NOOSA DRIVE) - FROM NORTH
REFERENCE PHOTO 2.0 REFERENCE PHOTO 3.0
NTS - NTS -
client notes D 31.05.17 PL FOR CLIENT APPROVAL drawing drawing no.
GRILL'D • All works to be in accordance with the Building Code of Australia, Australian standards, statutory regulations and local authority requirements.
C 24.05.17 PL FOR CLIENT APPROVAL DA0003
• Do not scale this drawing. All dimensions to be verified on site prior to construction. Any inconsistencies to be reported to Giant immediately. If in doubt please
ask Giant for clarification.
REFERENCE PHOTOS 1/2
• Any variation from these drawings requires written approval from Giant.
• This drawing has been produced to illustrate design intent. All shop drawings are to be submitted to and sanctioned by Giant prior to manufacture or - - - - scale NTS @ A3
project construction. Contractor to confirm structural integrity, stability and feasibility of all units/components prior to manufacture.
Design Consultants SHOP 5/ 50 HASTINGS STREET • Contractor to liaise with third party suppliers to confirm exact requirements, including electrical, data, comms & hydraulic requirements a & access points.
Ground Floor, 3 Little Collins St • Contractor to ensure consistency between similar materials is maintained.
- - - - drawn by PL checked by CW
Surry Hills NSW 2010 NOOSA HEADS • Copyright © Giant. This drawing is the property of Giant, design and copyright are reserved by them. The drawing is issued upon condition it is not copied,
reproduced, retained or disclosed to any unauthorised person either wholly or in part without the prior consent in writing of Giant. All rights reserved
T 8045 2950 E [email protected] issue date initials revision details client approval issue D
Page 5
PHOTO ABOVE SHOWS EXISTING SHOPFRONT (NOOSA DRIVE) - FROM WEST PHOTO ABOVE SHOWS EXISTING SHOPFRONT - FROM EAST
REFERENCE PHOTO 4.0 REFERENCE PHOTO 5.0
NTS - NTS -
client notes D 31.05.17 PL FOR CLIENT APPROVAL drawing drawing no.
GRILL'D • All works to be in accordance with the Building Code of Australia, Australian standards, statutory regulations and local authority requirements.
C 24.05.17 PL FOR CLIENT APPROVAL DA0004
• Do not scale this drawing. All dimensions to be verified on site prior to construction. Any inconsistencies to be reported to Giant immediately. If in doubt please
ask Giant for clarification.
REFERENCE PHOTOS 2/2
• Any variation from these drawings requires written approval from Giant.
• This drawing has been produced to illustrate design intent. All shop drawings are to be submitted to and sanctioned by Giant prior to manufacture or - - - - scale NTS @ A3
project construction. Contractor to confirm structural integrity, stability and feasibility of all units/components prior to manufacture.
Design Consultants SHOP 5/ 50 HASTINGS STREET • Contractor to liaise with third party suppliers to confirm exact requirements, including electrical, data, comms & hydraulic requirements a & access points.
Ground Floor, 3 Little Collins St • Contractor to ensure consistency between similar materials is maintained.
- - - - drawn by PL checked by CW
Surry Hills NSW 2010 NOOSA HEADS • Copyright © Giant. This drawing is the property of Giant, design and copyright are reserved by them. The drawing is issued upon condition it is not copied,
reproduced, retained or disclosed to any unauthorised person either wholly or in part without the prior consent in writing of Giant. All rights reserved
T 8045 2950 E [email protected] issue date initials revision details client approval issue D
Page 6
EXISTING WALL EXISTING KITCHEN
DIVIDING TENANCIES - TO BE MODIFIED
SHOP 4 AND SHOP 5
PRO
THROUGH TO EXISTING BIN
PER
STORAGE, TOILETS &
CLEANERS SINK
TY B
OUN
DAR
Y
EXISTING PLANTER &
STONEWORK TO BE RETAINED
KITCH
COOL
ROOM
EN
ER
LOCK
EXISTING GLAZED SLIDING
DOORS TO BE RETAINED LOCK
ER
ER
LOCK
NING
CLEA
P.
EQUI
EXISTING STRUCTURAL
COLUMNS TO BE RETAINED
LOA
DIN
G ZO
NE
UP
BAR AREA
EXISTING CHAIR STORAGE
EXISTING STAIRS AT ENTRY TO TO BE RETAINED
TENANCY TO BE RETAINED
EXISTING BAR TO BE
EXISTING ROLLER SHUTTER REMOVED
TO REMAIN
NOO
EXISTING GAS BOTTLE
STORAGE TO REMAIN
SA
DRIV
PAR
K
ING
E
BAY
EXISTING UMBRELLAS
TO BE REMOVED
SAIL AWNING TO
ADJACENT PROPERTY
TO REMAIN AS IS
FLOOR PLAN 1.0
0 1 2 3M
SCALE 1:100 -
N
client notes D 31.05.17 PL FOR CLIENT APPROVAL drawing drawing no.
GRILL'D • All works to be in accordance with the Building Code of Australia, Australian standards, statutory regulations and local authority requirements.
C 24.05.17 PL FOR CLIENT APPROVAL DA0005
• Do not scale this drawing. All dimensions to be verified on site prior to construction. Any inconsistencies to be reported to Giant immediately. If in doubt please
ask Giant for clarification.
EXISTING PLAN
• Any variation from these drawings requires written approval from Giant.
• This drawing has been produced to illustrate design intent. All shop drawings are to be submitted to and sanctioned by Giant prior to manufacture or B 03.05.17 PL FOR CLIENT APPROVAL scale 1:100 @ A3
project construction. Contractor to confirm structural integrity, stability and feasibility of all units/components prior to manufacture.
Design Consultants SHOP 5/ 50 HASTINGS STREET • Contractor to liaise with third party suppliers to confirm exact requirements, including electrical, data, comms & hydraulic requirements a & access points.
Ground Floor, 3 Little Collins St • Contractor to ensure consistency between similar materials is maintained.
A 10.04.17 PL FOR CLIENT APPROVAL drawn by PL checked by CW
Surry Hills NSW 2010 NOOSA HEADS • Copyright © Giant. This drawing is the property of Giant, design and copyright are reserved by them. The drawing is issued upon condition it is not copied,
reproduced, retained or disclosed to any unauthorised person either wholly or in part without the prior consent in writing of Giant. All rights reserved
T 8045 2950 E [email protected] issue date initials revision details client approval issue D
Page 7
FA2 FA1 BR1 ST3 PC3 PC2 TM2
PHOTO ABOVE SHOWS PROPOSED BESSER BLOCK
(BR1) DESIGN INSTALLED
REFERENCE PHOTO 4.0
TL1 TL2 TM1 TL3
NTS -
TL4 ST1
PHOTO ABOVE SHOWS EXISTING STONEWORK. PROPOSED
STONEWORK (ST3) TO SHOPFRONT IS TO MATCH THE TONE
OF EXISTING
NOTE:
MATERIALS 2.0 REFERENCE PHOTO 3.0
TO BE READ IN CONJUNCTION WITH FINISHES
SCHEDULE (DWG NO. 0001)
NTS - NTS -
client notes D 31.05.17 PL FOR CLIENT APPROVAL drawing drawing no.
GRILL'D • All works to be in accordance with the Building Code of Australia, Australian standards, statutory regulations and local authority requirements.
C 24.05.17 PL FOR CLIENT APPROVAL DA0006
• Do not scale this drawing. All dimensions to be verified on site prior to construction. Any inconsistencies to be reported to Giant immediately. If in doubt please
ask Giant for clarification.
MATERIALS BOARD
• Any variation from these drawings requires written approval from Giant.
• This drawing has been produced to illustrate design intent. All shop drawings are to be submitted to and sanctioned by Giant prior to manufacture or - - - - scale NTS @ A3
project construction. Contractor to confirm structural integrity, stability and feasibility of all units/components prior to manufacture.
Design Consultants SHOP 5/ 50 HASTINGS STREET • Contractor to liaise with third party suppliers to confirm exact requirements, including electrical, data, comms & hydraulic requirements a & access points.
Ground Floor, 3 Little Collins St • Contractor to ensure consistency between similar materials is maintained.
- - - - drawn by PL checked by CW
Surry Hills NSW 2010 NOOSA HEADS • Copyright © Giant. This drawing is the property of Giant, design and copyright are reserved by them. The drawing is issued upon condition it is not copied,
reproduced, retained or disclosed to any unauthorised person either wholly or in part without the prior consent in writing of Giant. All rights reserved
T 8045 2950 E [email protected] issue date initials revision details client approval issue D
Page 8
98 SEATS
INTERNAL FOH: 25m2
BOH: 38m2
EXTERNAL: 77m2
PRO
THROUGH TO EXISTING BIN
STORAGE, TOILETS &
PER
CLEANERS SINK
TY B
OUN
PREP FRIDGE
DAR
1286W
MENS STAFF
Y
0 TOILET
610x60 LOCATION OF EXTERNAL
FREEZER/FRIDGE CUPBOARDS
460x13
GAST.
TRAY
ING
O/H SHELV
TIER
OL)
50
2
LCOH
U/B (A FRIDGE
2 DR
DRINKS 00
FRIDGE
310x12
MEAT
TOAS
EXISTING COOLROOM TO
UB
COOL
2.0
0201
BE CONVERTED TO
460x10
TE
FRIDGE
DRINKS FREEZER ROOM 4m2
R
3 DR
460x13
SECURITY CAGE
FREE M
EXISTING GARDEN TO REMAIN.
POS
ROOM
50
ORDER
450x1050
ROO
EXISTING PALM TREE TO BE RETAINED - POINT / EXISTING STORAGE CUPBOARDS &
50
NEW HIGH QUALITY ARTIFICAL PLANTS BAR LOCKERS TO REMAIN
Z ER
POS
460x90
FOR LOW LEVEL PLANTING ER
LOCK
COLD
ER
SECURITY CAGE
DRES
0
POS LOCK PROPOSED NEW COOLROOM
600mm
460x13
STOR W
450x1050
POS
LOCATION 4.9m2
S FRID UNDER
U/B BIN
1850
ER
INFILL
0x1200 LOCK
AGE
PROPOSED NEW COUNTER 31
50
GE W
NING
LOCATION CLEA
P.
50 EQUI
/
310x13 SECURE DRINKS STORAGE
SECURITY CAGE
450x1050
EXHA
UST HO
EXISTING GLAZED SLIDING DOORS & SERVICE & BOH AREA TO HAVE
310x12
OD OV
ROLLER SHUTTER DOOR TO BE RETAINED. ANTI-SLIP FLOOR TILES WITH
MATCHING 100mm HIGH COVING
ER
SIGNAGE TO CENTRAL COLUMN - REFER TO
00
LOA
ELEVATION (DWG NO. 0201) TILES TO WALL AND FLOOR
UB AD
DRAW W
JUNCTIONS
DIN
240L
1100
HEAT
310x10
ANDE
ERS
G ZO
LAMP
EXISTING ENTRY STAIRS TO REMAIN HAND BASIN SET DOWN 50mm
2 TIER O/H SHELVING
OVER
50
NE
AND BE RE-FINISHED W/ NEW FLOOR FROM BENCH LEVEL.
HWB
TILE AUTOMATIC TAP WITH SOAP &
PREP
UP PAPER TOWEL DISPENSER
1286W
FRIDGE
NEW FINISH TO STRUCTURAL
COLUMN - 200x300MM EXISTING CHAIR STORAGE
EXHAUST STEAM HOOD
OVER
TO REMAIN
U
MEN
OIL TROLLEYS STORAGE
DW
SAFE
3 TIER O/H
3 TIER O/H SHELVING SHELVING 2 TIER O/H SHELVING
NEW ILLUMINATED MENU PLINTH
& NEON SIGNAGE
NEW WALLS TO BE OF SOLID
CONSTRUCTION. ALL GAPS TO
BE FILLED IN WITH INJECTION
GAS BOTTLES
NEW TILE FINISH TO FOAM TO COMPLY WITH FOOD
EXISTING WALL STANDARD
NOO
NEW PLANTER BOXES & BESSER
BLOCK BALUSTRADE W/ TIMBER
BENCH. NEW HIGH QUALITY EXISTING GAS BOTTLE
ARTIFICIAL PLANTS TO PLANTER STORAGE TO REMAIN
SA
PROPOSED NEW TERRACE
DRIV
SEATING
PAR
K
ING
E
BAY
EXISTING SLAB TO REMAIN AND BE
3.0 RE-FINISHED W/ NEW FLOOR PAVING
0201
NEW STRUCTURAL COLUMNS
(100x100MM) - SHOWN BLUE
EXISTING GARDEN TO REMAIN. SAIL AWNING TO EXISTING RENDERED NEW IRREGULAR
NEW HIGH QUALITY ARTIFICIAL ADJACENT PROPERTY BUILDING FACADE TO STONEWORK TO
PLANTS. NEW PAINT FINISH. TO REMAIN AS IS REMAIN - TO RECEIVE EXISTING WALLS -
NEW PAINT FINISH PROPOSED STONEWORK
TO MATCH EXISTING ON
SITE
NEW BESSER BLOCK
BALUSTRADE W/ TIMBER
CAPPING TO SIDE FACADE. NEW FLOOR PLAN 1.0
POWDERCOATED SCREENING
ABOVE - CLEAR BLINDS TO BE
0 1 2 3M INSTALLED TO ALLOW FOR
PROTECTION WHEN WEATHER IS SCALE 1:100 -
N INCLEMENT
client notes D 31.05.17 PL FOR CLIENT APPROVAL drawing drawing no.
GRILL'D • All works to be in accordance with the Building Code of Australia, Australian standards, statutory regulations and local authority requirements.
C 24.05.17 PL FOR CLIENT APPROVAL PROPOSED GROUND DA0101
• Do not scale this drawing. All dimensions to be verified on site prior to construction. Any inconsistencies to be reported to Giant immediately. If in doubt please
ask Giant for clarification. FLOOR PLAN
• Any variation from these drawings requires written approval from Giant.
• This drawing has been produced to illustrate design intent. All shop drawings are to be submitted to and sanctioned by Giant prior to manufacture or B 03.05.17 PL FOR CLIENT APPROVAL scale 1:100 @ A3
project construction. Contractor to confirm structural integrity, stability and feasibility of all units/components prior to manufacture.
Design Consultants SHOP 5/ 50 HASTINGS STREET • Contractor to liaise with third party suppliers to confirm exact requirements, including electrical, data, comms & hydraulic requirements a & access points.
Ground Floor, 3 Little Collins St • Contractor to ensure consistency between similar materials is maintained.
A 10.04.17 PL FOR CLIENT APPROVAL drawn by PL checked by CW
Surry Hills NSW 2010 NOOSA HEADS • Copyright © Giant. This drawing is the property of Giant, design and copyright are reserved by them. The drawing is issued upon condition it is not copied,
reproduced, retained or disclosed to any unauthorised person either wholly or in part without the prior consent in writing of Giant. All rights reserved
T 8045 2950 E [email protected] issue date initials revision details client approval issue D
Page 9
LIGHTING LEGEND
S/STEEL EXHAUST HOOD OVER
Symbol Description Quantity Watts COOKING LINE. HOOD CONNECT TO
LESSORS EXTRACTION SYSTEM
TBC.CONTRACTOR CONFIRM SIZE TO
IP RATED CAN LIGHT SUIT EQUIPMENT BELOW
L1 GREEN TRIM FINISH WITH FROSTED
COVER 14 -
LAMP: WARM WHITE 3000K 2100 AFFL
SUPPLIER: TBC
ROLLED STEEL 'COW SIGN'
IP RATED CAN LIGHT TO BE CONCEAL FIXED TO STRIPED PAINT FINISH TO
L1 WHITE TRIM FINISH WITH FROSTED COVER STONE CLAD WALL BULKHEAD ABOVE
LAMP: WARM WHITE 3000K 3 - KITCHEN PASS THRU
SUPPLIER: TBC
NEON SIGNAGE TO 2100 AFFL
RIBBON BULKHEAD
WALL MOUNTED LIGHT - UP & DOWN
L3 BLACK TRIM FINISH WITH FROSTED COVER
LAMP: WARM WHITE 3000K 4 -
LIGHTS TO BE DIMMABLE, WARM WHITE,
ON SEPERATE CIRCUIT
SUPPLIER: TBC
IP44 RATED LED RECESSED DOWNLIGHT
PRO
L5 REF: 22W LED, WHITE FINISH
LIGHTS ARE TO BE WARM WHITE, ON 6 -
PER
SEPERATE CIRCUIT
SUPPLIER: TBC
TY B
OUN
L6 SURFACE MOUNTED (WITHIN EXHAUST LOWEST POINT OF EXISTING ROOF
3 84w
PREP FRIDGE
HOOD) T5 FLUORESCENT (28W)
DAR
(2040mm AFFL). CONTRACTOR TO
1286W
SPEC & QUANTITY TBC BY HOOD
CONFIRM ON SITE PRIOR TO MENS STAFF
Y
SUPPLIER: TBC CONSTRUCTION - SHOWN FOR 610x60
0 TOILET
REFERENCE ONLY
460x13
GAST.
TRAY
L7 FREEZER/ COOLROOM LIGHT
OL)
50
ON SEPERATE CIRCUIT 7 - LCOH
U/B (A FRIDGE
2 DR
00
FRIDGE
DRINKS
310x12
MEAT
TOAS
UB
COOL
L8
460x10
IN FLOOR UPLIGHT
TE
IDGE
DRINKS FR
3W LED 24 DEGREE BEAM, WARM WHITE
R
3 DR
460x13
15 -
SECURITY CAGE
FREE M
SUPPLIER: TBC SC 2000 AFFL
POS
ROOM
50
ORDER
450x1050
ROO
POINT /
50
LOW LEVEL - LINEAR LED STRIP BAR COOLROOM & FREEZER
ZER
POS
460x90
ER ROOM CEILING. LIGHTING BY
TEMP: 2700K. 10w PER METER W/ ALU LOCK
EXTRUSION W/ OPAL DIFFUSER 4.2m - COOLROOM CONTRACTOR
COLD
ER
SECURITY CAGE
DECORATIVE TO HAVE DIFFUSER WHERE
DRES
0
LOCK
3600
POS
NOTED, NO SPOTTING, ENSURE EVEN
600mm
460x13
STOR W
450x1050
POS
S FRID UNDER
U/B BIN
DISTRIBUTION
1850
ER
INFILL
LINEAR LED LIGHTING TO 310x12
00 LOCK
AGE
READ IN CONJUCTION WITH DETAIL
50
GE W
DRAWINGS FOR ALL LOCATIONS ORDER POINT/BAR FRONT S/P CLEA
NING
DRIVER FOR LED TO BE LOCATED CLOSE 50 EQUI
P.
/
310x13
EXHA
TO LED, LIGHTS TO BE DIMMABLE, ON
SECURITY CAGE
SEPERATE CIRCUIT SC 2400 AFFL
450x1050
UST
SUPPLIER: TBC
1050
310x12
S/P PAINT FINISH TO NEW
HOOD
IT GYPROCK CEILING TO
TOTAL WATTS EX
00
BOH AREA
WATTS PER M2
UB AD
DRAW W
2445 AFFL
240L
ACCE R
EXIT
1100
LADD
QTY
310x10
ANDE
ERS
SS
E
POWERCOAT FINISH TO
50
EXIT
I BEAM BORDER
SC SURFACED MOUNTED SECURITY CAMERA IN BLACK
FINISH . (CONTRACTOR TO SUPPLY AND INSTALL) , 3
HWB
SPEC TO BE APPROVED BY CLIENT PRIOR TO
PREP
INSTALLATION
1286W
FRIDGE
SURFACE MOUNTED CEILING SPEAKER ,
BLACK FINISH, CLIENT SUPPLY, CONTRACTOR TO 5
1000
CONDENSER
INSTALL , CONFIRM SPEC WITH CLIENT HOOD
U
MEN
2100 AFFL
DW
1000
SAFE
EXIT S/STEEL CONDENSER HOOD OVER
EMERGENCY LIGHTING DISHWASHER (1000X1000MM-TBC).
CONNECTED TO LESSORS EXTRACT
S/P ELECTRICAL CONTRACTOR TO ADVISE FINAL 3 IN FLOOR UPLIGHT TO SYSTEM (TBC). CONTRACTOR TO
LOCATIONS & CO-ORDINATE FINAL LAYOUT,
INSTALL AS PER RELEVANT BCA STANDARDS SHINE UP ONTO BESSER CONFIRM SIZE TO SUIT DISHWASHER
BLOCK BALUSTRADE BELOW
GAS BOTTLES
SLIMLINE EDGE-LIT CLEAR PERSPEX EXIT SIGN
EXIT ELECTRICAL CONTRACTOR TO ADVISE FINAL 6
EXIT
LOCATIONS & CO-ORDINATE FINAL LAYOUT, NEON SIGNAGE TO WALL
INSTALL AS PER RELEVANT BCA STANDARDS 2635 AFFL
SPECIAL PAINT FINISH TO 2470 AFFL
GENERAL NOTES: NEW GYPROCK CEILING
PAINT FINISH TO T&G
ALL LIGHTS TO BE ON DIMMABLE CIRCUITS PANELLING TO FOH
AREA
1. FIRE SPRINKLERS TO BE INSTALLED TO SATISFY RETRACTABLE FABRIC AWNING FIXED TO
FACADE - LOGO TO FRONT FACE. SC
AS2118 (CHECK WITH LANDLORD/CERTIFIER)
2. EWIS SPEAKERS TO BE INSTALLED TO SATISFY AWNING TO ASSIST WITH AFTERNOON
AS2118 (CHECK WITH LANDLORD/CERTIFIER) SUN SHADE TO RESTAURANT DINING
3. SHOPFITTER IS REQUIRED TO CHECK ALL LEAD AREA. PROPOSED AWNING TO ALIGN
TIMES AND AVAILABILITY OF LIGHTS IMMEDIATELY TO WITH EX. LAGUNA JACKS AWNING
AVOID ANY DELAYS. LEAD TIMES MAY BE MORE THAN 12
WEEKS. SHOPFITTER IS TO TAKE LEAD TIMES INTO
ACCOUNT AND ORDER ON TIME.
4. CONTRACTOR TO SUPPLY AND INSTALL EXIT
SIGNAGE
NEW ACCESS LADDER TO POTTED HANGING PLANTS 3 x WALL MOUNTED
EXISTING CEILING STORAGE - CENTRAL TO TABLES LIGHTBOX SIGNAGE -
AREA ABOVE BOH/KITCHEN. BELOW. HIGH QUALITY CENTRAL TO TABLES
CONTRACTOR TO CONFIRM ARTIFICIAL PLANTS TO BE
SPEC & LOCATION PRIOR TO USE
CONSTRUCTION
RCP 1.0
SCALE 1:100 -
client notes D 31.05.17 PL FOR CLIENT APPROVAL drawing drawing no.
GRILL'D • All works to be in accordance with the Building Code of Australia, Australian standards, statutory regulations and local authority requirements.
C 24.05.17 PL FOR CLIENT APPROVAL PROPOSED GROUND DA0102
• Do not scale this drawing. All dimensions to be verified on site prior to construction. Any inconsistencies to be reported to Giant immediately. If in doubt please
ask Giant for clarification. FLOOR RCP
• Any variation from these drawings requires written approval from Giant.
• This drawing has been produced to illustrate design intent. All shop drawings are to be submitted to and sanctioned by Giant prior to manufacture or B 03.05.17 PL FOR CLIENT APPROVAL scale 1:100 @ A3
project construction. Contractor to confirm structural integrity, stability and feasibility of all units/components prior to manufacture.
Design Consultants SHOP 5/ 50 HASTINGS STREET • Contractor to liaise with third party suppliers to confirm exact requirements, including electrical, data, comms & hydraulic requirements a & access points.
Ground Floor, 3 Little Collins St • Contractor to ensure consistency between similar materials is maintained.
A 10.04.17 PL FOR CLIENT APPROVAL drawn by PL checked by CW
Surry Hills NSW 2010 NOOSA HEADS • Copyright © Giant. This drawing is the property of Giant, design and copyright are reserved by them. The drawing is issued upon condition it is not copied,
reproduced, retained or disclosed to any unauthorised person either wholly or in part without the prior consent in writing of Giant. All rights reserved
T 8045 2950 E [email protected] issue date initials revision details client approval issue D
Page 10
ORDER COUNTER ON GROUND
LEVEL SHOWN GREYED FOR
REFERENCE
PRO
PER
TY B
OUN
PREP FRIDGE
DAR
1286W
MENS STAFF
Y
2800mm AFFL HEIGHT OF EX. 610x60
0 TOILET
ROOF AT THIS POINT
460x13
GAST.
TRAY
OL)
50
LCOH
U/B (A FRIDGE
2 DR
00
FRIDGE
DRINKS
310x12
MEAT
TOAS
UB
460x10
TE
IDGE
DRINKS FR
R
3 DR
460x13
SECURITY CAGE
EXISTING PLANTER ON GROUND
POS
50
LEVEL SHOWN GREYED FOR
450x1050
ED
PITCH
50
REFERENCE ROOF
POS
460x90
ER
LOCK EXISTING ROOF TO
UP
KED
COLD
G RA
CEILIN ER REMAIN
SECURITY CAGE
DRES
0
POS LOCK
600mm
BESSER BLOCK PARAPET W/ PLANTER
460x13
STOR W
450x1050
POS
S FRID UNDER
D UP
U/B BIN
KE
1850
BOXES TO RAISED PERGOLA ROOF G RA ER
INFILL
CEILIN
310x12
00 LOCK
AGE
SECTION. HIGH QUALITY ARTIFICIAL
50
GE W
NING
CLEA
PLANTS TO BE USED 50 EQUI
P.
/
310x13
SECURITY CAGE
PITCHED
ROOF
450x1050
EXISTING CEILING STORAGE TO
REMAIN (INTERIOR HIGH LEVEL)
310x12
FRONT SECTION OF NEW SHOWN RED HATCHED
PERGOLA ROOF RAISED (370mm)
00
LOA
TO SIT ABOVE EX. ROOF
UB AD
DRAW W
DIN
240L
ACCE R
1100
LADD
310x10
ANDE
ERS
G ZO
SS
E
EXISTING HIGH LEVEL
50
NE
WINDOWS TO REMAIN
HWB
PROPOSED ILLUMINATED SIGNAGE
PREP
UP
TO BE FIXED TO FRONT FACADE -
1286W
FRIDGE
SHOWN DASHED
2640mm AFFL (HEIGHT OF LOWER
PERGOLA ROOF)
U
MEN
DW
SAFE
RETRACTABLE FABRIC AWNING FIXED TO
FACADE - LOGO TO FRONT FACE.
AWNING TO ASSIST WITH AFTERNOON
SUN SHADE TO RESTAURANT DINING
AREA. PROPOSED AWNING TO ALIGN
WITH EX. LAGUNA JACKS AWNING
ROOF PITCHED UP
NOO
3010mm AFFL (HEIGHT OF UPPER
PERGOLA ROOF)
SA
PROPOSED ILLUMINATED SIGNAGE
DRIV
TO BE FIXED TO FRONT FACADE
PAR
PITCHED ROOF ABOVE SHOWN
K
ING
DASHED FOR REFERENCE ONLY
E
BAY
EXISTING PLANTER ON GROUND NEW PITCHED ROOF - STRIPED
LEVEL SHOWN GREYED FOR FABRIC - 10 DEGREE PITCH
REFERENCE
FLOOR PLAN 1.0
0 1 2 3M
SCALE 1:100 -
N
client notes D 31.05.17 PL FOR CLIENT APPROVAL drawing drawing no.
GRILL'D • All works to be in accordance with the Building Code of Australia, Australian standards, statutory regulations and local authority requirements.
C 24.05.17 PL FOR CLIENT APPROVAL PROPOSED PERGOLA DA0111
• Do not scale this drawing. All dimensions to be verified on site prior to construction. Any inconsistencies to be reported to Giant immediately. If in doubt please
ask Giant for clarification. ROOF PLAN
• Any variation from these drawings requires written approval from Giant.
• This drawing has been produced to illustrate design intent. All shop drawings are to be submitted to and sanctioned by Giant prior to manufacture or B 03.05.17 PL FOR CLIENT APPROVAL scale 1:100 @ A3
project construction. Contractor to confirm structural integrity, stability and feasibility of all units/components prior to manufacture.
Design Consultants SHOP 5/ 50 HASTINGS STREET • Contractor to liaise with third party suppliers to confirm exact requirements, including electrical, data, comms & hydraulic requirements a & access points.
Ground Floor, 3 Little Collins St • Contractor to ensure consistency between similar materials is maintained.
A 10.04.17 PL FOR CLIENT APPROVAL drawn by PL checked by CW
Surry Hills NSW 2010 NOOSA HEADS • Copyright © Giant. This drawing is the property of Giant, design and copyright are reserved by them. The drawing is issued upon condition it is not copied,
reproduced, retained or disclosed to any unauthorised person either wholly or in part without the prior consent in writing of Giant. All rights reserved
T 8045 2950 E [email protected] issue date initials revision details client approval issue D
Page 11
LIGHTING LEGEND
Symbol Description Quantity Watts
IP RATED CAN LIGHT
L1 GREEN TRIM FINISH WITH FROSTED
COVER 6 -
LAMP: WARM WHITE 3000K
SUPPLIER: TBC
L4 WOVEN LIGHT SHADE
SHADE: TBC
GLOBE: TBC 3 -
FABRIC CORD: TBC
LIGHTS TO BE DIMMABLE, ON SEPERATE
CIRCUIT
SUPPLIER: CONTRACTOR
GRILL'D MULTI-COLOURED
IP44 RATED LED RECESSED DOWNLIGHT NEON SIGNAGE (2 OFF) FIXED
L5 REF: 22W LED, WHITE FINISH TO RIBBON BULKHEAD.
LIGHTS ARE TO BE WARM WHITE, ON 3 - CONCEAL FIXED
SEPERATE CIRCUIT
SUPPLIER: TBC
HIGH LEVEL - LINEAR LED STRIP
TEMP: 2700K. 10w PER METER W/ ALU
EXTRUSION W/ OPAL DIFFUSER -
DECORATIVE TO HAVE DIFFUSER WHERE
NOTED, NO SPOTTING, ENSURE EVEN 16.7m
DISTRIBUTION
READ IN CONJUCTION WITH DETAIL
DRAWINGS FOR ALL LOCATIONS
DRIVER FOR LED TO BE LOCATED CLOSE
PRO
TO LED, LIGHTS TO BE DIMMABLE, ON
SEPERATE CIRCUIT
PER
SUPPLIER: TBC
TY B
TOTAL WATTS
OUN
WATTS PER M2
DAR
QTY
Y
LOWEST POINT OF EXISTING ROOF
(2040mm AFFL). CONTRACTOR TO
SC SURFACED MOUNTED SECURITY CAMERA IN BLACK
FINISH . (CONTRACTOR TO SUPPLY AND INSTALL) , CONFIRM ON SITE PRIOR TO
SPEC TO BE APPROVED BY CLIENT PRIOR TO
1
CONSTRUCTION - SHOWN FOR
INSTALLATION
REFERENCE ONLY
SURFACE MOUNTED CEILING SPEAKER ,
BLACK FINISH, CLIENT SUPPLY, CONTRACTOR TO 1
INSTALL , CONFIRM SPEC WITH CLIENT
BESSER BLOCK WALL
ABOVE RIBBON BULKHEAD
GRILL'D MULTI-COLOURED 'RELAX' & KITCHEN PASS THRU
NEON SIGN ABOVE FRIDGE.
CONCEAL FIXED KED
UP
GENERAL NOTES: CEILIN
G RA
NEW PAINT FINISH TO EXISTING UP
ALL LIGHTS TO BE ON DIMMABLE CIRCUITS RAKED CEILING. MAKE GOOD CEILIN
G RA
KED
WHERE NECESSARY EXISTING CEILING STORAGE TO
1. FIRE SPRINKLERS TO BE INSTALLED TO SATISFY REMAIN (INTERIOR HIGH LEVEL)
AS2118 (CHECK WITH LANDLORD/CERTIFIER) SHOWN RED HATCHED
2. EWIS SPEAKERS TO BE INSTALLED TO SATISFY
AS2118 (CHECK WITH LANDLORD/CERTIFIER)
3. SHOPFITTER IS REQUIRED TO CHECK ALL LEAD WOVEN PENDANT LIGHTS TO BE
TIMES AND AVAILABILITY OF LIGHTS IMMEDIATELY TO SUSPENDED FROM RAKED
AVOID ANY DELAYS. LEAD TIMES MAY BE MORE THAN 12 CEILING (2480-3035mm AFFL)
WEEKS. SHOPFITTER IS TO TAKE LEAD TIMES INTO NEW ACCESS LADDER TO EXISTING
ACCOUNT AND ORDER ON TIME.
ACCE R
CEILING STORAGE AREA ABOVE
LADD
4. CONTRACTOR TO SUPPLY AND INSTALL EXIT BOH/KITCHEN. CONTRACTOR TO
SIGNAGE 2400 AFFL
SS
E
CONFIRM SPEC & LOCATION PRIOR TO
775mm HIGH RIBBON BULKHEAD WITH CONSTRUCTION
PLANTER. LED LIGHTING TO SHINE UP
TOWARDS RAKED CEILING
SC EXISTING BEAMS TO REMAIN.
MAKE GOOD WHERE
3850 AFFL NECESSARY. NEW PAINT FINISH
BOTTOM OF
EXISTING BEAM
4900 AFFL PITCHED FABRIC ROOF
SHOWN GREYED FOR
ROOF PITCHED UP
BOTTOM OF REFERENCE
EXISTING BEAM
RETRACTABLE FABRIC
AWNING SHOWN GREYED
FOR REFERENCE
RCP 1.0
0 1 2 3M
SCALE 1:100 -
N
client notes D 31.05.17 PL FOR CLIENT APPROVAL drawing drawing no.
GRILL'D • All works to be in accordance with the Building Code of Australia, Australian standards, statutory regulations and local authority requirements.
C 24.05.17 PL FOR CLIENT APPROVAL PROPOSED PERGOLA DA0112
• Do not scale this drawing. All dimensions to be verified on site prior to construction. Any inconsistencies to be reported to Giant immediately. If in doubt please
ask Giant for clarification. ROOF RCP
• Any variation from these drawings requires written approval from Giant.
• This drawing has been produced to illustrate design intent. All shop drawings are to be submitted to and sanctioned by Giant prior to manufacture or B 03.05.17 PL FOR CLIENT APPROVAL scale 1:100 @ A3
project construction. Contractor to confirm structural integrity, stability and feasibility of all units/components prior to manufacture.
Design Consultants SHOP 5/ 50 HASTINGS STREET • Contractor to liaise with third party suppliers to confirm exact requirements, including electrical, data, comms & hydraulic requirements a & access points.
Ground Floor, 3 Little Collins St • Contractor to ensure consistency between similar materials is maintained.
A 10.04.17 PL FOR CLIENT APPROVAL drawn by PL checked by CW
Surry Hills NSW 2010 NOOSA HEADS • Copyright © Giant. This drawing is the property of Giant, design and copyright are reserved by them. The drawing is issued upon condition it is not copied,
reproduced, retained or disclosed to any unauthorised person either wholly or in part without the prior consent in writing of Giant. All rights reserved
T 8045 2950 E [email protected] issue date initials revision details client approval issue D
Page 12
EXISTING BUILDING SHOWN EXISTING GLAZED
GREYED BEYOND FOR REFERENCE SLIDING DOORS
ONLY - TO REMAIN AS IS TO BE RETAINED
PROPOSED ILLUMINATED
SIGNAGE TO BE FIXED TO
FACADE
BESSER BLOCK PARAPET W/
PLANTER BOXES TO RAISED
PERGOLA ROOF SECTION. HIGH
QUALITY ARTIFICIAL PLANTS TO
EX. SIGNAGE BE USED
3770mm AFFL
3010mm AFFL (HEIGHT OF
880
UPPER PERGOLA ROOF)
EX. SIGNAGE
2640mm AFFL (HEIGHT OF 1250 RETRACTABLE FABRIC AWNING
LOWER PERGOLA ROOF) FIXED TO FACADE - LOGO TO
H EALT HY B UR G E RS
FRONT FACE
BESSER BLOCK
BALUSTRADE W/ TIMBER
BENCH
FFL
EXISTING GARDEN TO
REMAIN - STONEWORK
NEW FLOOR TILES
TO EXISTING
PROPOSED PLANTER
BOXES TO EITHER SIDE OF
SHOPFRONT - WEST ELEVATION 2.0
TO BE RETAINED ENTRY STIARS SHOPFRONT ENTRY
STAIRS. HIGH QUALITY
ARTIFICIAL PLANTS TO BE SCALE 1:100 0101
POWERCOAT FINISH TO USED
STRUCTURAL I BEAMS.
COMPOSITE TIMBER
EXISTING BUILDING SHOWN FINISH BETWEEN BEAMS
NEW ILLUMINATED
GREYED BEYOND FOR MENU PLINTH &
REFERENCE ONLY - TO REMAIN NEON SIGNAGE
AS IS
BESSER BLOCK PARAPET W/ PLANTER EXISTING HIGH LEVEL
BOXES TO RAISED PERGOLA ROOF WINDOWS TO REMAIN
SECTION. HIGH QUALITY ARTIFICIAL
PLANTS TO BE USED
RETRACTABLE FABRIC AWNING FIXED TO
FACADE - LOGO TO FRONT FACE.
AWNING TO ASSIST WITH AFTERNOON PROPOSED PITCHED ROOF -
SUN SHADE TO RESTAURANT DINING STRIPED FABRIC - 10 DEGREE
AREA. PROPOSED AWNING TO ALIGN 820 PITCH
WITH EX. LAGUNA JACKS AWNING
3770mm AFFL
820
3010mm AFFL (HEIGHT OF
UPPER PERGOLA ROOF)
2640mm AFFL (HEIGHT OF NEW IRREGULAR STONEWORK TO
LOWER PERGOLA ROOF) EXISTING WALLS. STONEWORK TO
MATCH THE TONE OF EX.
STONEWORK - REFER TO DWG NO.
EXISTING GARDEN & STONEWORK TO 0006
REMAIN. EXISTING PALM TREE TO BE
770
RETAINED - NEW HIGH QUALITY POWDERCOATED STEEL GATE
ARTIFICAL PLANTS FOR LOW LEVEL TO GAS BOTTLE STORAGE
PLANTING AREA. GATE TO LOCKABLE.
500
NEW PAINT FINISH
FFL
NEW NEON SIGNAGE (BOTH SHOPFRONT - SOUTH ELEVATION 3.0
SIDES OF PLINTH) &
ILLUMINATED MENU NEW POWDERCOATED NEW BESSER BLOCK EXISTING RENDERED
PROPOSED ILLUMINATED
SIGNAGE TO BE FIXED TO SCREENING TO SIDE BALUSTRADE W/ BUILDING FACADE TO SCALE 1:100 0101
FRONT FACADE FACADE. REFER TO TIMBER CAPPING REMAIN - TO RECEIVE
DETAIL (DWG NO. 0301) NEW PAINT FINISH
client notes D 31.05.17 PL FOR CLIENT APPROVAL drawing drawing no.
GRILL'D • All works to be in accordance with the Building Code of Australia, Australian standards, statutory regulations and local authority requirements.
C 24.05.17 PL FOR CLIENT APPROVAL DA0201
• Do not scale this drawing. All dimensions to be verified on site prior to construction. Any inconsistencies to be reported to Giant immediately. If in doubt please
ask Giant for clarification.
SHOPFRONT ELEVATIONS
• Any variation from these drawings requires written approval from Giant.
• This drawing has been produced to illustrate design intent. All shop drawings are to be submitted to and sanctioned by Giant prior to manufacture or B 03.05.17 PL FOR CLIENT APPROVAL scale 1:100 @ A3
project construction. Contractor to confirm structural integrity, stability and feasibility of all units/components prior to manufacture.
Design Consultants SHOP 5/ 50 HASTINGS STREET • Contractor to liaise with third party suppliers to confirm exact requirements, including electrical, data, comms & hydraulic requirements a & access points.
Ground Floor, 3 Little Collins St • Contractor to ensure consistency between similar materials is maintained.
A 10.04.17 PL FOR CLIENT APPROVAL drawn by PL checked by CW
Surry Hills NSW 2010 NOOSA HEADS • Copyright © Giant. This drawing is the property of Giant, design and copyright are reserved by them. The drawing is issued upon condition it is not copied,
reproduced, retained or disclosed to any unauthorised person either wholly or in part without the prior consent in writing of Giant. All rights reserved
T 8045 2950 E [email protected] issue date initials revision details client approval issue D
The text continues on page 13.