Original source · versioned page text
2017-06-06 - P&E Agenda Attachment 1 to Item 6 Draft Alignment Amendments Part 1 (Pages 1-907)
Very large file (18.9 MB): the original may take a few minutes to open or download. The page text below is quick to read.
Division 2—General provisions for assessment tables
Including amendments to 3 July 2017
The Noosa Plan
9.2 Assessment categories and types of developmentCategories of
development and assessment
The assessment categoriescategories of development and assessment for each type of
development are identified in column 2 of tables 9.1 to 9.10. The types of development
are as follows—
9.2.1 Tables 9.1 to 9.9 – making a material change of use for a defined use, or another use in a
defined use class, listed in column 1; or
9.2.2 Table 9.10 –development other than a material change of use, listed in column 1 and
including—
a) Carrying out building work not associated with a material change of use;
b) Carrying out building work if demolition, relocation or removal of a building and not
associated with a material change of use;
c) Placing an advertising device on premises;
d) Reconfiguring a lot;
e) Carrying out operational work associated with a material change of use where a
Development Permit for material change of use has been issued;
f) Carrying out operational work associated with reconfiguring a lot where a
Development Permit for reconfiguring a lot has been issued;
g) Carrying out operational works for the construction of a driveway for a Detached
house;
h) Carrying out operational works for prescribed tidal works;
i) Excavating or filling of land not associated with a material change of use; and
j) Other.
9.3 Relevant assessment criteriaAssessment benchmarks for
assessable development for self-assessable development and
assessable development in each zoneand requirements for accepted
development
9.3.1 The relevant assessment criteria benchmarks in each zone are referred to in column 3 of
Tables 9.1 to 9.9.
9.3.2 For self-assessableaccepted development development subject to requirements and
development requiring code assessment, the relevant assessment criteria benchmarks
3
and requirements for accepted development are the applicable codes .
9.3.3 For impact assessableImpact assessment development, the development is assessed
against the whole planning scheme.
3
Assessment criteria benchmarks will include matters prescribed by Sections 3.5.4 (Code Assessment) and 3.5.5 (Impact
Assessment) of IPA in addition to the provisions of this planning scheme.
9-4
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalLog in to download the original file
The download may take a few minutes. On mobile data, it is best to wait for Wi-Fi.