Council archive · source document
2017-06-06 - P&E Agenda Attachment 1 to Item 6 Draft Alignment Amendments Part 1 (Pages 1-907)
Very large file (18.9 MB): the original may take a few minutes to open or download. The page text below is quick to read.
column 1 column 2
Specific Outcomes Acceptable solutions (if self-
Including amendments to 3 July 2017
assessableaccepted development subject to
The Noosa Plan
requirements)
Probable solutions (if code assessablecode
assessment)
O4 All uses and works maintain an adequate No solution provided.
safe distance from electrical infrastructure
including substations, overhead powerlines,
power poles and transformers;
AND
O5 Structures are not constructed under
overhead electricity transmission lines, within
electricity transmission line easements.
14.79 Maximum total signface area for all signs on a site
O6 The maximum signface area of all S6.1 The total signface area of all advertising
advertising devices on a site does not unduly devices per tenancy does not exceed 0.75m² of
detract from a building, site or local area, signface area per linear metre of active street
including by:- facing building or 10m² whichever is the lessor.
a) visually dominating the appearance of a No solution provided.
building; or
being visually intrusive in the streetscape or
other setting in which it is located.
O7 The total signface area of all advertising
devices per tenancy does not exceed 0.75m² of
signface area per linear metre of active street
facing building or 10m² whichever is the lesser.
14.80 Illumination, lighting and movement
O8 An advertising device only incorporates S87.1 Illuminated signs are not located in a
illumination and lighting where it:- Residential Zone, Rural Zone or Open Space
a) is appropriate to its setting and is Conservation Zone.
compatible with the visual amenity of the
surrounding area; S87.2 Where the advertising device is
b) does not cause an environmental illuminated, it:-
nuisance or distraction; a) has a maximum luminance of 350
c) does not create glare, reflecting or flaring candelas per m²;
of colours; and b) does not incorporate flashing lights;
d) will not create a potential safety hazard, c) is switched off between 11:00pm and
including a traffic safety hazard. sunset of the following day; and
d) is limited to 1 sign per tenancy.
O9 An advertising device does not move or S98.1 No solution provided.
incorporate elements that give the impression of
movement.
Table 14-47 – Specific requirements for all types of advertising device
Column 1 Column 2
Advertising device type Specific requirements
Wall or Facade Sign Types
Business name plate (a) is limited to one sign per tenancy;
(b) is attached to a fence, wall or building face at street level;
93
Advertising Devices Code
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalUsed in these records
2017-06-06 - P&E Agenda Attachment 1 to Item 6 Draft Alignment Amendments Part 1 (Pages 1-907)(PDF, 18MB)Related documentPublic source context ↗Public source context ↗Public source context ↗
2017-06-06-p-e-agenda-attachment-1-to-item-6-draft-alignment-amendments-part-1-pages-1-907-pdfRelated documentPublic source context ↗
About this file
- File size
- 18.9 MB (very large file)
- File type
No other editions are linked here.
Original file
Log in to download the original file
The download may take a few minutes. On mobile data, it is best to wait for Wi-Fi.