Original source · versioned page text
Stormwater Management Plan - Rev 1
The original of this document is very large (12.7 MB). Opening the original or downloading it may take a few minutes. Please be patient and don't click again. The page text is quick to read. If you are on mobile data, it is best to wait until you are on Wi-Fi.
This document appears to be plans or drawings. Its page text below holds only the words printed on the drawings, without the drawings themselves, so it may be jumbled or hard to follow. To see the plans as drawn, choose Original above or download the file (both need you to log in).
Log in to see the plans as drawn 2. Gully Pit Cover Removal
Opening a Hinged Pit Cover
CHAPTER 4
A. Insert the lifting hooks beneath the grate
B. Check hinge points are not damaged and debris is not
caught in the hinge area
C. Fully open pit grate, ensuring that the grate will stay in the
open position without any external forces applied. Grates that
do not remain open without being held, should be removed
or secured during maintenance activities.
Opening a Non-Hinged Pit Cover
A. Place lifting hooks beneath grate, where possible in the four
corners of the grate. Concrete lids may have Gatic lifting points,
a key arrangement or holes in the lid, which may require special
equipment such as Gatic lifters. Alternatively if safe to do so grip
the grade with your hands.
B. Position each person on either side of the grate.
C. Lift the grate, ensuring that good heavy lifting posture is used at
all times.
D. Place the grate on angle on the gutter, to allow for the lifting
hooks to be removed.
E. For extremely heavy one-piece grates and concrete Gatic covers,
insert the lifters in place and slide the lids back.
7 SPEL StormSack | Operations & maintenance www.spel.com.au
[OCR of page images]
2. Gully Pit Cover Removal
Opening a Hinged Pit Cover
A.
B.
C.
Insert the lifting hooks beneath the grate
Check hinge points are not damaged and debris is not
caught in the hinge area
Fully open pit grate, ensuring that the grate will stay in the
open position without any external forces applied. Grates that
do not remain open without being held, should be removed
or secured during maintenance activities.
Opening a Non-Hinged Pit Cover
A.
Place lifting hooks beneath grate, where possible in the four
corners of the grate. Concrete lids may have Gatic lifting points,
a key arrangement or holes in the lid, which may require special
equipment such as Gatic lifters. Alternatively if safe to do so grip
the grade with your hands.
Position each person on either side of the grate.
Lift the grate, ensuring that good heavy lifting posture is used at
all times.
Place the grate on angle on the gutter, to allow for the lifting
hooks to be removed.
For extremely heavy one-piece grates and concrete Gatic covers,
insert the lifters in place and slide the lids back.
SPEL StormSack | Operations & maintenance
ase
www.spel.com.au
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalVery large file: the download may take a few minutes. If you are on mobile data, it is best to wait until you are on Wi-Fi.
Searchable page text hides email addresses. Original files are unchanged and may show email addresses.