Original source · versioned page text
Attachment 7 - Acoustic Report
Rw Ratings QDC Glazing
Acoustic seals
Entry door
Glazing*
Glazing*
Floors
QDC
Roof
Wall
Lot Level
Category
First 1 35 35 27 28 - 4mm float yes
216-229 Ground 0 - - - - - 4mm float no
First 0 - - - - - 4mm float no
230-232 Ground 0 - - - - - 4mm float no
First 1 35 35 27 28 - 4mm float yes
*If the total glazing area of a habitable room (living areas/bedrooms) is less than 1.8m2, glazing with minimum Rw 24
(4mm float with standard weather seals) can be used for QDC Noise Category 1 and glazing with minimum Rw 32 (6.38mm
laminate glass with acoustic seals) can be used for Noise Category 2.
Note: As there are currently no plans available for any proposed dwellings, all residential lots were
assessed in accordance with QDC. Once dwelling locations and plans are finalised an additional
assessment for each dwelling should be conducted to determine if QDC Noise Categories can be
further reduced.
9.2.2 Alternative Ventilation
We recommend that all locations nominated in Table 14 as QDC Noise Category 1-2 have the
provision for an alternative ventilation system similar to air-conditioning or mechanical ventilation to
allow windows and doors to be closed.
2019253 R01A Lot 2 & 3 Myall Street, Cooroy RTN ENV.docx © Acoustic Works 2019 Page 24
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalLog in to download the original file
Large file: the download may take up to a minute.
Searchable page text hides email addresses. Original files are unchanged and may show email addresses.