Original source · versioned page text
BR1C10.LST
From the archive CALPUFF.zip (folder CALPUFF/AMG_NewPlan/BIOR1/BR1C10), inside D21030-2_NoosaSprings_Files ODOUR MODELLING - Part RFI.zip. File date in the archive: 2018-08-21 03:21.
yes
Sub-Grid TIBL module used for shore line?
Default: 0 ! MSGTIBL = 0 !
(MSGTIBL)
0 = no
1 = yes
Boundary conditions (concentration) modeled?
Default: 0 ! MBCON = 0 !
(MBCON)
0 = no
1 = yes, using formatted BCON.DAT file
2 = yes, using unformatted CONC.DAT file
Note: MBCON > 0 requires that the last species modeled
be 'BCON'. Mass is placed in species BCON when
generating boundary condition puffs so that clean
air entering the modeling domain can be simulated
in the same way as polluted air. Specify zero
emission of species BCON for all regular sources.
Individual source contributions saved?
Default: 0 ! MSOURCE = 0 !
(MSOURCE)
0 = no
1 = yes
Analyses of fogging and icing impacts due to emissions from
arrays of mechanically-forced cooling towers can be performed
using CALPUFF in conjunction with a cooling tower emissions
processor (CTEMISS) and its associated postprocessors. Hourly
emissions of water vapor and temperature from each cooling tower
cell are computed for the current cell configuration and ambient
conditions by CTEMISS. CALPUFF models the dispersion of these
emissions and provides cloud information in a specialized format
for further analysis. Output to FOG.DAT is provided in either
'plume mode' or 'receptor mode' format.
Configure for FOG Model output?
Default: 0 ! MFOG = 0 !
(MFOG)
0 = no
1 = yes - report results in PLUME Mode format
2 = yes - report results in RECEPTOR Mode format
Test options specified to see if
they conform to regulatory
values? (MREG) Default: 1 ! MREG = 0 !
0 = NO checks are made
1 = Technical options must conform to USEPA
Long Range Transport (LRT) guidance
METFM 1 or 2
AVET 60. (min)
PGTIME 60. (min)
MGAUSS 1
MCTADJ 3
MTRANS 1
MTIP 1
MRISE 1
MCHEM 1 or 3 (if modeling SOx, NOx)
MWET 1
MDRY 1
MDISP 2 or 3
MPDF 0 if MDISP=3
1 if MDISP=2
MROUGH 0
MPARTL 1
MPARTLBA 0
SYTDEP 550. (m)
MHFTSZ 0
SVMIN 0.5 (m/s)
!END!
-------------------------------------------------------------------------------
INPUT GROUP: 3a, 3b -- Species list
-------------------
------------
Subgroup (3a)
------------
The following species are modeled:
! CSPEC = ODOUR ! !END!
Dry OUTPUT GROUP
SPECIES MODELED EMITTED DEPOSITED NUMBER
NAME (0=NO, 1=YES) (0=NO, 1=YES) (0=NO, (0=NONE,
(Limit: 12 1=COMPUTED-GAS 1=1st CGRUP,
Characters 2=COMPUTED-PARTICLE 2=2nd CGRUP,
in length) 3=USER-SPECIFIED) 3= etc.)
! ODOUR = 1, 1, 0, 0 !
!END!
Note: The last species in (3a) must be 'BCON' when using the
boundary condition option (MBCON > 0). Species BCON should
typically be modeled as inert (no chem transformation or
removal).
-------------
Subgroup (3b)
-------------
The following names are used for Species-Groups in which results
for certain species are combined (added) prior to output. The
CGRUP name will be used as the species name in output files.
Use this feature to model specific particle-size distributions
by treating each size-range as a separate species.
Order must be consistent with 3(a) above.
-------------------------------------------------------------------------------
INPUT GROUP: 4 -- Map Projection and Grid control parameters
--------------
Projection for all (X,Y):
-------------------------
Map projection
(PMAP) Default: UTM ! PMAP = UTM !
UTM : Universal Transverse Mercator
TTM : Tangential Transverse Mercator
LCC : Lambert Conformal Conic
PS : Polar Stereographic
EM : Equatorial Mercator
LAZA : Lambert Azimuthal Equal Area
False Easting and Northing (km) at the projection origin
(Used only if PMAP= TTM, LCC, or LAZA)
(FEAST) Default=0.0 ! FEAST = 0.000 !
(FNORTH) Default=0.0 ! FNORTH = 0.000 !
UTM zone (1 to 60)
(Used only if PMAP=UTM)
(IUTMZN) No Default ! IUTMZN = 56 !
Hemisphere for UTM projection?
(Used only if PMAP=UTM)
(UTMHEM) Default: N ! UTMHEM = S !
N : Northern hemisphere projection
S : Southern hemisphere projection
Latitude and Longitude (decimal degrees) of projection origin
(Used only if PMAP= TTM, LCC, PS, EM, or LAZA)
(RLAT0) No Default ! RLAT0 = 0N !
(RLON0) No Default ! RLON0 = 0E !
TTM : RLON0 identifies central (true N/S) meridian of projection
RLAT0 selected for convenience
LCC : RLON0 identifies central (true N/S) meridian of projection
RLAT0 selected for convenience
PS : RLON0 identifies central (grid N/S) meridian of projection
RLAT0 selected for convenience
EM : RLON0 identifies central meridian of projection
RLAT0 is REPLACED by 0.0N (Equator)
LAZA: RLON0 identifies longitude of tangent-point of mapping plane
RLAT0 identifies latitude of tangent-point of mapping plane
Matching parallel(s) of latitude (decimal degrees) for projection
(Used only if PMAP= LCC or PS)
(XLAT1) No Default ! XLAT1 = 0N !
(XLAT2) No Default ! XLAT2 = 0N !
LCC : Projection cone slices through Earth's surface at XLAT1 and XLAT2
PS : Projection plane slices through Earth at XLAT1
(XLAT2 is not used)
----------
Note: Latitudes and longitudes should be positive, and include a
letter N,S,E, or W indicating north or south latitude, and
east or west longitude. For example,
35.9 N Latitude = 35.9N
118.7 E Longitude = 118.7E
Datum-region
------------
The Datum-Region for the coordinates is identified by a character
string. Many mapping products currently available use the model of the
Earth known as the World Geodetic System 1984 (WGS-84). Other local
models may be in use, and their selection in CALMET will make its output
consistent with local mapping products. The list of Datum-Regions with
official transformation parameters is provided by the National Imagery and
Mapping Agency (NIMA).
NIMA Datum - Regions(Examples)
------------------------------------------------------------------------------
WGS-84 WGS-84 Reference Ellipsoid and Geoid, Global coverage (WGS84)
NAS-C NORTH AMERICAN 1927 Clarke 1866 Spheroid, MEAN FOR CONUS (NAD27)
NAR-C NORTH AMERICAN 1983 GRS 80 Spheroid, MEAN FOR CONUS (NAD83)
NWS-84 NWS 6370KM Radius, Sphere
ESR-S ESRI REFERENCE 6371KM Radius, Sphere
Datum-region for output coordinates
(DATUM) Default: WGS-84 ! DATUM = WGS-84 !
METEOROLOGICAL Grid (outermost if nested CALMET grids are used):
Rectangular grid defined for projection PMAP,
with X the Easting and Y the Northing coordinate
No. X grid cells (NX) No default ! NX = 94 !
No. Y grid cells (NY) No default ! NY = 94 !
No. vertical layers (NZ) No default ! NZ = 12 !
Grid spacing (DGRIDKM) No default ! DGRIDKM = 0.05 !
Units: km
Cell face heights
(ZFACE(nz+1)) No defaults
Units: m
! ZFACE = .0, 20.0, 60.0, 100.0, 150.0, 200.0, 250.0, 350.0, 500.0, 800.0,
1600.0, 2600.0, 4600.0 !
Reference Coordinates
of SOUTHWEST corner of
grid cell(1, 1):
X coordinate (XORIGKM) No default ! XORIGKM = 505.985 !
Y coordinate (YORIGKM) No default ! YORIGKM = 7075.885 !
Units: km
COMPUTATIONAL Grid:
The computational grid is identical to or a subset of the MET. grid.
The lower left (LL) corner of the computational grid is at grid point
(IBCOMP, JBCOMP) of the MET. grid. The upper right (UR) corner of the
computational grid is at grid point (IECOMP, JECOMP) of the MET. grid.
The grid spacing of the computational grid is the same as the MET. grid.
X index of LL corner (IBCOMP) No default ! IBCOMP = 1 !
(1 <= IBCOMP <= NX)
Y index of LL corner (JBCOMP) No default ! JBCOMP = 1 !
(1 <= JBCOMP <= NY)
X index of UR corner (IECOMP) No default ! IECOMP = 94 !
(1 <= IECOMP <= NX)
Y index of UR corner (JECOMP) No default ! JECOMP = 94 !
(1 <= JECOMP <= NY)
SAMPLING Grid (GRIDDED RECEPTORS):
The lower left (LL) corner of the sampling grid is at grid point
(IBSAMP, JBSAMP) of the MET. grid. The upper right (UR) corner of the
sampling grid is at grid point (IESAMP, JESAMP) of the MET. grid.
The sampling grid must be identical to or a subset of the computational
grid. It may be a nested grid inside the computational grid.
The grid spacing of the sampling grid is DGRIDKM/MESHDN.
Logical flag indicating if gridded
receptors are used (LSAMP) Default: T ! LSAMP = T !
(T=yes, F=no)
X index of LL corner (IBSAMP) No default ! IBSAMP = 1 !
(IBCOMP <= IBSAMP <= IECOMP)
Y index of LL corner (JBSAMP) No default ! JBSAMP = 1 !
(JBCOMP <= JBSAMP <= JECOMP)
X index of UR corner (IESAMP) No default ! IESAMP = 94 !
(IBCOMP <= IESAMP <= IECOMP)
Y index of UR corner (JESAMP) No default ! JESAMP = 94 !
(JBCOMP <= JESAMP <= JECOMP)
Nesting factor of the sampling
grid (MESHDN) Default: 1 ! MESHDN = 1 !
(MESHDN is an integer >= 1)
!END!
-------------------------------------------------------------------------------
INPUT GROUP: 5 -- Output Options
--------------
* *
FILE DEFAULT VALUE VALUE THIS RUN
---- ------------- --------------
Concentrations (ICON) 1 ! ICON = 1 !
Dry Fluxes (IDRY) 1 ! IDRY = 0 !
Wet Fluxes (IWET) 1 ! IWET = 0 !
2D Temperature (IT2D) 0 ! IT2D = 0 !
2D Density (IRHO) 0 ! IRHO = 0 !
Relative Humidity (IVIS) 1 ! IVIS = 0 !
(relative humidity file is
required for visibility
analysis)
Use data compression option in output file?
(LCOMPRS) Default: T ! LCOMPRS = T !
*
0 = Do not create file, 1 = create file
QA PLOT FILE OUTPUT OPTION:
Create a standard series of output files (e.g.
locations of sources, receptors, grids ...)
suitable for plotting?
(IQAPLOT) Default: 1 ! IQAPLOT = 1 !
0 = no
1 = yes
DIAGNOSTIC PUFF-TRACKING OUTPUT OPTION:
Puff locations and properties reported to
PFTRAK.DAT file for postprocessing?
(IPFTRAK) Default: 0 ! IPFTRAK = 0 !
0 = no
1 = yes, update puff output at end of each timestep
2 = yes, update puff output at end of each sampling step
DIAGNOSTIC MASS FLUX OUTPUT OPTIONS:
Mass flux across specified boundaries
for selected species reported?
(IMFLX) Default: 0 ! IMFLX = 0 !
0 = no
1 = yes (FLUXBDY.DAT and MASSFLX.DAT filenames
are specified in Input Group 0)
Mass balance for each species
reported?
(IMBAL) Default: 0 ! IMBAL = 0 !
0 = no
1 = yes (MASSBAL.DAT filename is
specified in Input Group 0)
NUMERICAL RISE OUTPUT OPTION:
Create a file with plume properties for each rise
increment, for each model timestep?
This applies to sources modeled with numerical rise
and is limited to ONE source in the run.
(INRISE) Default: 0 ! INRISE = 0 !
0 = no
1 = yes (RISE.DAT filename is
specified in Input Group 0)
LINE PRINTER OUTPUT OPTIONS:
Print concentrations (ICPRT) Default: 0 ! ICPRT = 0 !
Print dry fluxes (IDPRT) Default: 0 ! IDPRT = 0 !
Print wet fluxes (IWPRT) Default: 0 ! IWPRT = 0 !
(0 = Do not print, 1 = Print)
Concentration print interval
(ICFRQ) in timesteps Default: 1 ! ICFRQ = 1 !
Dry flux print interval
(IDFRQ) in timesteps Default: 1 ! IDFRQ = 1 !
Wet flux print interval
(IWFRQ) in timesteps Default: 1 ! IWFRQ = 1 !
Units for Line Printer Output
(IPRTU) Default: 1 ! IPRTU = 3 !
for for
Concentration Deposition
1 = g/m**3 g/m**2/s
2 = mg/m**3 mg/m**2/s
3 = ug/m**3 ug/m**2/s
4 = ng/m**3 ng/m**2/s
5 = Odour Units
6 = TBq/m**3 TBq/m**2/s TBq=terabecquerel
7 = GBq/m**3 GBq/m**2/s GBq=gigabecquerel
8 = Bq/m**3 Bq/m**2/s Bq=becquerel (disintegrations/s)
Messages tracking progress of run
written to the screen ?
(IMESG) Default: 2 ! IMESG = 2 !
0 = no
1 = yes (advection step, puff ID)
2 = yes (YYYYJJJHH, # old puffs, # emitted puffs)
SPECIES (or GROUP for combined species) LIST FOR OUTPUT OPTIONS
---- CONCENTRATIONS ---- ------ DRY FLUXES ------ ------ WET FLUXES ------ -- MASS FLUX --
SPECIES
/GROUP PRINTED? SAVED ON DISK? PRINTED? SAVED ON DISK? PRINTED? SAVED ON DISK? SAVED ON DISK?
------- ------------------------ ------------------------ ------------------------ ---------------
! ODOUR = 0, 1, 0, 0, 0, 0, 0 !
Note: Species BCON (for MBCON > 0) does not need to be saved on disk.
OPTIONS FOR PRINTING "DEBUG" QUANTITIES (much output)
Logical for debug output
(LDEBUG) Default: F ! LDEBUG = F !
First puff to track
(IPFDEB) Default: 1 ! IPFDEB = 1 !
Number of puffs to track
(NPFDEB) Default: 1 ! NPFDEB = 1 !
Met. period to start output
(NN1) Default: 1 ! NN1 = 1 !
Met. period to end output
(NN2) Default: 10 ! NN2 = 10 !
!END!
-------------------------------------------------------------------------------
INPUT GROUP: 6a, 6b, & 6c -- Subgrid scale complex terrain inputs
-------------------------
---------------
Subgroup (6a)
---------------
Number of terrain features (NHILL) Default: 0 ! NHILL = 0 !
Number of special complex terrain
receptors (NCTREC) Default: 0 ! NCTREC = 0 !
Terrain and CTSG Receptor data for
CTSG hills input in CTDM format ?
(MHILL) No Default ! MHILL = 2 !
1 = Hill and Receptor data created
by CTDM processors & read from
HILL.DAT and HILLRCT.DAT files
2 = Hill data created by OPTHILL &
input below in Subgroup (6b);
Receptor data in Subgroup (6c)
Factor to convert horizontal dimensions Default: 1.0 ! XHILL2M = 1.0 !
to meters (MHILL=1)
Factor to convert vertical dimensions Default: 1.0 ! ZHILL2M = 1.0 !
to meters (MHILL=1)
X-origin of CTDM system relative to No Default ! XCTDMKM = 0 !
CALPUFF coordinate system, in Kilometers (MHILL=1)
Y-origin of CTDM system relative to No Default ! YCTDMKM = 0 !
CALPUFF coordinate system, in Kilometers (MHILL=1)
! END !
---------------
Subgroup (6b)
---------------
1 **
HILL information
HILL XC YC THETAH ZGRID RELIEF EXPO 1 EXPO 2 SCALE 1 SCALE 2 AMAX1 AMAX2
NO. (km) (km) (deg.) (m) (m) (m) (m) (m) (m) (m) (m)
---- ---- ---- ------ ----- ------ ------ ------ ------- ------- ----- -----
---------------
Subgroup (6c)
---------------
COMPLEX TERRAIN RECEPTOR INFORMATION
XRCT YRCT ZRCT See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the original