Council archive · source document
Development Application part 2 of 2 plans - MCU13/0080
Plans and drawings: the text below has words only, no drawings.
Very large file (51.3 MB): may take a few minutes to open.
~
3’May2013
18Sunsee r Crose the certifier
Engineering Design Standards
-
Roads, Drainage and
Earthworks.
02 Maintenance access is S2.1 A registered easement in Not applicable
provided to all sewers, water favour of Council is created
mains, stormwater drains, over all underground
overland flow paths and infrastructure located in private
associated structures. property;
AND
S2.2 The width of the easement
is the greater of 3m or the width
of the zone of influence;
AND
S2.3 The easement is centred
over the centreline of the
infrastructure
Division 19 -
Waste Management Code
Specific Outcomes Probable Solutions Compliance
Waste separation S1.1 Construction, operational Household waste only is
01 Development that generates and demolition works are
proposed. Each unit has
several classes of waste is planned and managed
sufficient on ground area to
designed so waste is collected, in accordance PSP1131;
stored and disposed of in a safe AND provide individual bin areas.
and ecologically sustainable S1.2 Adequate area is provided
manner3O. for on-site for the collection and Relevant conditions can be
separate storage of hazardous included as part of the
materials in their specific waste
development permit.
streams during construction,
operational and demolition
The proposal complies.
works;
02Waste storage areas AND
provide for adequate S2.1 Waste storage areas allow
separation of all recyclable and for the separate storage of
non-recyclable materials. different waste materials
for reuse or recycling by-
a) providing sufficient area to
store all recyclable material and
recycling containers required;
and
b) sign posting the types of
waste stored.
Design and location of waste S3.1 Waste storage areas are There is sufficient ground level
storage areas designed and maintained in
private open space to provide
03Waste storage areas are accordance with PSP 9;
individual waste storage areas
located so that they are AND
for each unit.
42
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalUsed in these records
Development Application part 2 of 2 plans - MCU13/0080Related documentApplication case desk ↗
About this file
- File size
- 51.3 MB (very large file)
- File type
No other editions are linked here.
Original file
Log in to download the original file
The download may take a few minutes. On mobile data, it is best to wait for Wi-Fi.