Compiled Approved plans MCU22/0087.01 & OPW22/0140.01

                                                                                                               Consult Arborist




                                 Figure 4: Base of the Bribie Island Pine approximately 1m from the edge of the road

                 A review of the site plans has been undertaken, and the Lower Ground Floor design for the
                 car parking is facilitated by the driveway exit onto Bottlebrush Avenue. As part of this frontage
                 redesign, the boundary wall and existing timber retaining wall located on the council verge
                 require removal. In the reconfiguration of the Lot level, the road reserve will be a slope that
                 can be relandscaped. This design will directly conflict with the existing trees thereby requiring
                 their removal.




                                         Figure 5: Existing timber retaining wall is proposed to be removed.



                 The existing trees on the Bottlebrush Ave frontage between the retaining wall and the
                 boundary wall have had their root systems restricted, reducing their ultimate growth size.
                 Having reached their potential in this location and circumstances, and with the trees displaying
                 slowed growth rates, their retention value does not warrant a major redesign.




                 22_12_01_AIA_Thynne_37 Bottlebrush Ave                                                                Page 9 of 21
Document Set ID: 24320610
                  22595441
Version: 1,
         2, Version Date: 20/11/2025
                          25/09/2023