2019-12-11 SM Agenda - Item 1 - Attachment 7 - Final New Noosa Plan - Part 8-10 Schedule Appendix - Clean version

Performance outcomes                                                   Acceptable Outcomes
Access Design
PO8                                                                    AO8.1
The design, management and maintenance of the access                   Driveways and crossovers are designed to comply with Council's
facilitates:                                                           standard drawings RS­049, RS­050, RS­056 and addendum as
(a)   safe and convenient use for vehicles, pedestrians and            applicable.
      cyclists;
                                                                       AO8.2
(b)   vehicles negotiating without contacting the driveway or
                                                                       Where a footpath exists, the driveway meets the road reserve at
      crossover surface; and
                                                                       the level of the existing footpath.
(c)   stormwater disposal without any negative impacts on the
      surrounding area.                                                AO8.3
                                                                       Driveways within the property:
                                                                       (a)   have a maximum gradient of 20% and vertical curves to
                                                                             ensure no scraping for a standard vehicle; or
                                                                       (b)   have a maximum gradient of 25% provided–
                                                                              (i)    the length of the driveway steeper than 20% does
                                                                                     not exceed 6 metres; and
                                                                              (ii)   there is a change in gradient not less than 2 metres
                                                                                     in length and not greater than 12:5% at the ends of
                                                                                     the 25% section of the driveway.

PO9                                                              AO9
The driveway and crossover design avoids using structures within The driveway and crossover i s designed without significant
the road reserve.                                                alteration to the existing road reserve whereby the finished surface
                                                                 level of the driveway is consistent in height with the existing height
                                                                 of the road reserve.

                                                                       Editor’s Note—Should the design not comply with the standard
                                                                       drawings, including any cut or fill within the road reserve, an
                                                                       operational works application to Council for a non­standard
                                                                       driveway is required.
Materials
PO10                                                                   AO10
Driveways and crossovers are to be able to withstand loadings          No pavers or permeable pavement systems are used within the
from vehicles and the use of pavers is avoided.                        road reserve.

                                                                       Editor’s Note—Examples of the types of pavers to avoid include
                                                                       clay, concrete and permeable pavement products.
Surface water
PO11                                                                   AO11
Driveways are designed to:                                             Driveways have a minimum grade of 1% away from any adjoining
(a)   prevent water from ponding or entering buildings;                buildings and are formed to drain to landscaped areas.

(b)   provide an opportunity for filtering of stormwater prior to it
      leaving the site; and
(c)   not reduce the stormwater carrying capacity of roadways.

Protection of infrastructure
PO12                                                                 AO12
Driveways do not damage or interfere with the location, function of, Driveways are located not less than 1.0 metre from stormwater
or access to Council infrastructure.                                 infrastructure.

                                                                       Editor’s Note—If the driveway covers or is within 1.0 metre of
                                                                       stormwater infrastructure, an operational works application to
                                                                       Council for a non­standard driveway is required.



  **FINAL DRAFT ­ Post Consultation 2019**
                                                                                                                                 Page 5 of 8