Approved Plans MCU20-0074 · MCU20/0074

                          -                                                                                                                                                                                                                                                                        Z:\14_Nigel's Backup\STUFF\107\LOT 107 WKG
                                                                                                                                                                                                                                                                                                          DWG'S Stage 1 Rev D 201016.pln
  NOOSA COUNCIL
  APPROVED PLAN
                                                                                                                                                                                                    Height
                                                                                                                                                                                                                                                                                                          REVISION A
MCU20/0074 7 DEC 2020                                                                                                                                                                     8.5m Max.
                                                                                                                                                                                                                                         Colorbond metal sheet roof @ 14° pitch
                                                                                                                                                                                                                                         Fixed in accordance with manufacturers specification

                                                                                                                                                          PREFABRICATED TIMBER ROOF TRUSSES TO BE
                                                                                                                                                       FIXED IN A/W MANURFACTURE'S SPECIFICATIONS,


                                                                                                                                Bulkhead                                                                                                                                                            ABODE SOLUTIONS
                                                                                                                                                                                                                                                                                                             Design & Drafting
                                                                                                                                                                                                                                                                                                               0400 799 146




                                                               2,700 CL
                                                                          2,100 JL
                                                                                                   Terrace                    Kitchen                              Dining           Half height wall
                                                                                                                                                                                                                           Mastersuite
                                                                                                                                                                                                                                                     Subfloor as per Structural
                                                                                                                                                                                                                                                     Engineers drawings
       Front boundary




                                                                                     RL - 119.40                                RL - 119.40




                                                                                                                                                                                                                                                          Rear boundary
                                                               2,400 CL
                                                                          2,100 JL
                                                                                                                                                                                                                     Rumpus
                                                       3,600


                                                                                                                                 Garage
                                                                                     RL - 116.70                                                                                                             RL - 116.70
                                 Driveway and                                                                                                                                                                                                     FGL
                              crossover as per Civil
                              Engineer's drawings                                                                                                                                                      NGL
                                                                                     RL - 115.50                                   RL - 115.50


                        1,500          1,500                               5,400                      1,500
                         1 IN 8         1 IN 6                                1 IN 5                   1 IN 8      CONCRETE SLAB & FOOTINGS TO BE CONSTRUCTED
                                                                                                      Roll Over   IN ACCORDANCE WITH ENGINEER'S SPECIFICATIONS

      RL - 114.20


                                                          9,900
                                                                                                                   1                          Section/Driveway
                                                                                                                                                          1:100

        Water Conservation
        PERFORMANCE CRITERIA
        The volume of water used in toilet cisterns in a new Class 1 building and a sole-occupancy of an
                                                                                                                                                     Materials
        existing class 2 building where toilets are replaced dnot exceed the volume of necessary for the                                             Roofing                      COLORBOND SHEET METAL ROOF - PITCH AS PER ELEVATIONS
        proper funcioning and operation of the toilet                                                                                                Roof Trusses                 ENGINEER DESIGNED ROOF TRUSSES - PITCH AS PER ELEVATIONS
        Where the following symbol         appears on any part of the attached documentation, the relevant
        contractor must ensure that the guidelines for Water Conservation are adhered to, as outlined                                                Ceiling Battens              22mm TOP HAT CEILING BATTENS INTERNALLY TO HOUSE
        below in "Acceptable Solutions"                                                                                                                                           35x42mm AIR DRIED PINE CEILING BATTENS TO EXTERNAL CEILINGS & SOFFITTS
                                                                                                                                                                                  FIX AT MAX. 450mm CRS.
        ACCEPTABLE SOLUTIONS                                                                                                                         Roof Battens                 50mm TOP HAT ROOF BATTENS BATTENS AT 900mm CRS. & 450mm CRS. AT EDGES
        In a new Class 1 building and a sole-occupancy unit of a new Class 2 building, and in an
        existing class 1 building or a sole-occupancy unit of an existing Class 2 building where toilets
                                                                                                                                                     Insulation                   65mm ANTICON ROOF INSULATION FIXED IN ACCORDANCE WITH MANUFACTURES SPECIFICATIONS
        are replaced, toilet cisterns have dual flush capability that does not exceed 6 litres on full flush                                         Gutters                      'LYSAGHT' 150mm WIDE QUAD GUTTERS OR SIMILAR
        and 3 litres on half flush                                                                                                                   Fascias                      METAL COLORBOND FASCIAS & BARGE BOARDS
                                                                                                                                                     Soffits                      'JAMES HARDIES' ECLIPSA OR HARDIFLEX EAVES LININGS OR SIMILAR
        RELEVANT CONTRACTORS COMPLIANCE - WATER CONSERVATION
                                                                                                                                                     Wall Framing                 EXTERNAL WALLS-70mm MPG12 STUD WALL FRAMING
        NOTE TO RELEVANT CONTRACTOR: please list the product(s) used that conform to the
                                                                                                                                                                                  INTERNAL WALLS-70mm MPG12 STUD WALL FRAMING                                                                   The designs and drawings shown on these plans
        "Acceptable Solutions" as described above.                                                                                                                                                                                                                                                are copyrighted and remain the property of
                                                                                                                                                     External                    LIGHTWEIGHT CLADDING PRODUCT - AS DESIGNATED ON ELEVATIONS
                                                                                                                                                                                                                                                                                                Abode Solutions, Unauthorized copy/distribution
        Hot Water Supply                                                                                                                             Wall Cladding                                                                                                                                        of these plans is prohibited.
                                                                                                                                                     Internal                     10mm PLASTERBOARD WALL & CEILING LININGS
                                                                                                                                                                                                                                                                                                Client Name
        PERFORMANCE CRITERIA                                                                                                                         Wall Linings                 6mm VILLABOARD TO WET AREA WALLS
        A new class 1 building must use hot water systems that have a low greenhouse gas emissions impact.                                                                                                                                                                                      Mr M Tarrant
                                                                                                                                                     Flooring                     ENGINEER DESIGNED CONCRETE SLAB
                                                                                                                                                                                                                                                                                                Project Name
        Where the following symbol HWS appears on any part of the attached documentation,
        the relevant contractor must ensure that the guidelines for Hot Water Supply are adhered to,                                                 Floor Coverings              REFER TO FLOOR PLAN
        as relevant contractor must ensure that the guidelines for Hot Water Supply are adhered to,
                                                                                                                                                                                                                                                                                                Proposed New Residence
        as outlined below in "Acceptable Solutions".                                                                                                                                                                                                                                            Lot 107, Tewantin Road,,
                                                                                                                                                     Entry Door                   SOLID CORE 2040 X 820 AS PER SPEC
                                                                                                                                                                                                                                                                                                Cooroy, Qld, 4563
                                                                                                                                                     Internal Doors               HAG 12 HOLLOW CORE
        Acceptable Solutions                                                                                                                         Cornice                      90mm CORNICES
        In a new Class 1 building, a hot water supply is provided by:
        (a) A heat pump or a solar hot water system that is eligible to receive:                                                                                                                                                                                                                Drawing Title:
                    (i) In a building with 3 or more bedrooms, at least 22 Renewable Energy
        Certificates; or                                                                                                                                                                                                                                                                                       SECTION
                    (ii) In a building with 1 or 2 bedrooms, at least 14 Renewable Energy Certificates;
                    or
                                                                                                                                                                                                                                                                                                Scale:
        (b) A gas hot water system with a five star energy rating.                                                                                                                                                                                                                                As Shown @ A3 Size       Date: 18.10.2020
        Note: Renewable Energy Certificates are issued under the Commonwealth Government's
                                                                                                                                                                                                                                                                                                Status:                   Checked By: NPH
        Mandatory Renewable Energy Target.                                                                                                                                                                                                                                                                   CD
        RELEVANT CONTRACTORS COMPLIANCE - HOT WATER SUPPLY                                                                                                                                                                                                                                      Project No:               Drawing No.:
        NOTE TO RELEVANT CONTRACTOR: please list the product(s) used that conform to the
        "Acceptable Solutions" as described above.
                                                                                                                                                                                                                                                                                                CDP107                     SD10
                                                                                                                                                                                                                                                                                                Plot Date:                            19/10/2020