200394 - 161 Cooroy Belli Creek Road, COOROY - Engineering Plans - Dwelling

  The building has not been designed for the deflection limitations of
  plasterboard. Although plasterboard may be used as internal wall and roof
  linings, excessive cracking is likely to occur should the plasterboard joints be
  set. When plasterboard is used, dado rails or expansion beads etc. should be
  considered as an alternative to setting the joints. If it is desired to line any part
  of the building with plasterboard, then the builder should consult their
  plasterboard supplier for expert advice. A suitable internal lining would be a
  plywood wall panel, eg. Rezilience 2.7mm Interior Wall Paneling or similar.
  Any linings and the fixings for any linings are to be provided by others.The
  selected wall and ceiling panel should have a weight of no more than 10kg/m2.
  Refer to manufacturer's fixing specifications for your chosen product and
  provide additional fixings as required.

  BUILDING CONSTRUCTION REQUIREMENTS
  The Purchaser/Owner is to be ensured that all building construction complies
  with:
  Workplace Health and Safety requirements for the particular State or Territory
  Building Code of Australia(current edition at time of approval) and all
  subsequent amendments and standards contained therein, including:
         • All glazing to comply with NCC Volume 2 Part 3.6
         • Smoke alarms(consumer mains power) to be installed in accordance with
         NCC Volume 2 Part 3.7.5.2
         • Provide lift-off hinges to doors of enclosed sanitary compartments in
         accordance with NCC Volume 2 Part 3.8.3.3
         • All stairs and balustrades to comply with NCC Volume 2 Part 3.9. Stairs are
         provided by owner and designed by others.

  MOISTURE MANAGEMENT
  It is the responsibility of the Builder to ensure appropriate Moisture
  Management is provided during wall construction through effective use of
  flashings, sealants and vapour permeable membrane such as vapour
  permeable sarking, building wraps, vapour retarders and damp-proof course.
  Before installing cladding, all wall openings, penetrations, intersections,
  connections, window sills, head and jambs must incorporate appropriate
  flashing and water proofing materials. Components and their installation that
  are used to manage moisture in wall construction must, at a minimum, comply
  with the requirements of relevant standards, building codes and
  manufacturer's specifications.




Revision           Date         Initial                                                                                                                                                       Apex Engineering Group PTY LTD
                                             Purchaser Name: Kari Goerlitz                                                                                                                    ACN 632 588 562
                                                                                                                        General Notes                Seller: Sheds n Homes Gympie             MIE Aust. (Registered NER Structural) 5276680
                                                                                                                                                                                              QLD : RPEQ No. 24223; TAS : 185770492; VIC : EC67493; N.T : 303557ES;
                                                                                                                    NOT FOR CONSTRUCTION             Name: Ultra Steel Structures Pty Ltd     Practising Professional Structural & Civil Engineers
                                             Site Address: 161 Cooroy Belli Creek Rd Cooroy QLD 4563 Australia                                       Phone: (07) 5408 2777

                                                                                                                              Page 2 of 2            Fax:
                                                                                                                                                                                              Signature:                         J. Ronaldson
                                                                                                                      ©Copyright Steelx IP Pty Ltd   Email: [email protected]
                                                                                                                                                                                                                                 Date: 03/12/20
                                             Drawing # SGYM200126 - 2                     Print Date:   3/12/2020