Original source · versioned page text
OPW14/0307 - Application for Prescribed Tidal Works
Very large file: it may take a few minutes
The original of this document is very large (18.8 MB). Opening the original or downloading it may take a few minutes. Please be patient and don't click again. The page text is quick to read. If you are on mobile data, it is best to wait until you are on Wi-Fi.
excess of 10m is essential to safely access
the jelly.
14.173 Design, Construction and Safety ..:.Boat Ramps
010 Boat ramps are designed and constructed 510.1Where there is an existing revetment C10.Notapplicable.
to- wali-
a) allow access by a wheeled boat trailer; a) the levels of a boat ramp
b) ensure that unacceptable risks to personal surface at the revetment
and public safety are unlikely to be caused; wall is no more than 150mm
c) avoid c1ullering of the watercourse; above the top of the wall,
d) avoid excessive traffic volumes within not more than 500mm
for.eshore areas and adjoining lands; and below the top of the wall
e) ensure that visual amenity of the foreshore is and not more than 200mm
maintained. above the existing beach;
and
b) The ramp extends into the
watercourse no more than
9m from a revetment wall;
AND
510.2 The ramp is constructed at a uniform
grade and no steeper than 1 in 5 (20%);
AND
510.3 The outer end of the ramp is no more
than 1OOmm above the level of the beach;
AND
510.4 No part of the ramp is to extend closer
than 1m to the prolongation of the
boundaries. (Refer Figure 14-33)
Fi lire 14-33
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalLog in to download the original file
Very large file: the download may take a few minutes. If you are on mobile data, it is best to wait until you are on Wi-Fi.
Searchable page text hides email addresses. Original files are unchanged and may show email addresses.