2018-05-17 Ordinary Meeting Agenda

ORDINARY MEETING AGENDA                                                              17 MAY 2018


         e.    Each tank fill point is to be provided with spill containment of at least 15 litre
               capacity per spill point.
         f.    All fill and vapour recovery points are to be earthed in accordance with AS 1020.0
               The control of undesirable static electricity and AS 3000 Electrical installations.
    Submit certification
    33   Prior to the commencement of the use certification by a suitably qualified person that
         the pipework has been constructed and installed in accordance with the above
         requirements must be submitted to Council.
    Leak detection for underground tanks
    34   Prior to the commencement of the use underground petroleum storage tanks shall be
         monitored for leaks in accordance with the following:
         a.    Establish a statistical inventory analysis system that is rated to detect a release
               of 0.76 litres/hour (or a release of 18 L/day), with greater than 95% confidence
               (and less than 5% false positive) or install automatic tank gauging that is rated to
               detect a release of 0.76 litres/hour (or a release of 18 L/day), with greater than
               95% confidence (and less than 5% false positive).
         b.    Install a tank pit observation well at the lowest point of each tank excavation pit.
    Submit certification
    35   Prior to the commencement of the use certification from a suitably qualified person that
         the leak detection system was installed and was verified as meeting the above leak
         detection performance standard using the current United States Environmental
         Protection Agency (USEPA) protocol must be submitted to Council.
    Leak detection for pipework
    36   Prior to the commencement of the use product pipework shall be monitored for leaks
         in accordance with the following:
         a.    Install electronic line leak detection for pressure piping that is rated to detect a
               release of 0.76 litres/hour (or a release of 18 L/day), with greater than 95%
               confidence (and less than 5% false positive); or
         b.    Install ‘safe suction’ design for suction piping in compliance with cl 4.3.4 AS 4897.
               The design, installation and operation of underground petroleum storage
               systems.
    Submit certification
    37   Prior to the commencement of the use certification from a suitably qualified person that
         the leak detection system was installed and was verified as meeting the above leak
         detection performance standard using the current United States Environmental
         Protection Agency (USEPA) protocol must be submitted to Council, or
    38   Prior to the commencement of the use certification from a suitably qualified person that
         the safe suction design has been installed and tested to comply with cl 4.3.4 AS 4897.
         The design, installation and operation of underground petroleum storage systems must
         be submitted to Council.
    Fuel dispensing areas
    39   Prior to the commencement of the use fuel dispensing areas shall be constructed and
         installed in accordance with the following:
         a.    All ground surfaces within the fuel dispensing area are to be constructed of
               impermeable materials such as waterproofed, reinforced concrete that is free of
               gaps and/or cracks. Impermeable, hydrocarbon resistant jointing material is to be
               used between treated concrete slabs.

                                                                                    Page 21 of 29