Council archive · source document
140307 Noosa Dunes · MCU14/0024
Attached to the e-mail MCU14/0024 Detached House 23/512 David Low Way Noosa Dunes.
5m 4 3 2 1
REV DESCRIPTION DATE
A Body Corp Issue 06/04/2014
CONSULTANTS
Surveyor
Max Watterson & Associates
P : 5442 6121 F : 5442 5125
A B C D Geotechnical
SCG Consulting Engineers
P : 5455 5604 F : 5455 5696
Structural Engineer
SCG Consulting Engineers
P : 5455 5604 F : 5455 5696
A
3.1 Hydraulic Engineer
SCG Consulting Engineers
P : 5455 5604 F : 5455 5696
Pool Fence
NOOSA DUNES BODY CORP COMPLIANCE
FLOOR AREAS m2
Frameless glass panels with 100 x 50mm INTERNAL FLOOR AREA 317
recessed channel, neoprene setting block MANAGER'S OFFICE 25
Pool Fence
Pool Fence
25mm wide x 10mm thick, 1000mm long EXTERNAL COVERED 4
strips @ 750mm cts, non-shrink grout and TOTAL 346
6,051
21
one topping to be in accordance with Swimming pool to be in accordance with
manufacturers specifications to form pool BUILDING ENVELOPE 208
engineers design and detail. Pool to have tiled MAX HEIGHT 8m
fence in accordance with the Building Act coping and selected waterline tile and tiled
1975, Building Regulation 2006, AS 1926 STOREYS 2
steps. Pool finish typical to have selected Crystal SITE COVERAGE APPROX. 32%
and Queensland Development Code MP finish. All pool construction to be in accordance
3.4-Swimming pool barriers. Pool fence to with manufacturers/installers specifications. Pool
be min. 1200mm high above adjoining SETBACKS FRONT - 5.1m
to have suitable pumps and filters located in SIDE - 2.0m
finished surface level and have 900mm accordance with manufactures/installers
non climbing zone as specified in pool 2,064 REAR 6.0m
specifications. Pool to have separate balance
legislation. tank.
6 6
Frameless glass panels with 100 x 50mm
LAP POOL recessed channel, neoprene setting block 25mm
Beadcrete wide x 10mm thick, 1000mm long strips @
RL 23.800 750mm cts, non-shrink grout and one topping to
be in accordance with manufacturers
Concrete steps to be in accordance with specifications to form pool fence in accordance
Underwater
structural engineers design and detail. pool with the Building Act 1975, Building Regulation
Steps to have selected slip resistant steps 2006, AS 1926 and Queensland Development
22
external tiles laid in accordance with Code MP 3.4-Swimming pool barriers. Pool
manufacturers specifications. Tiles shall fence to be min. 1200mm high above adjoining
comply with NCC 3.9.1.
FALL
POOL Rise: 175 x 18 finished surface level and have 900mm non
climbing zone as specified in pool legislation.
EQUIPMENT Going: 250 x 17
5 5
8
7
6
5
4
3
2
1
Rise: 138 x 8 RL 22.750 Concrete steps to be in accordance with
Going: 250 x 7 structural engineers design and detail. Steps to
have selected slip resistant external tiles laid in
accordance with manufacturers specifications.
4 MANAGERS
OFFICE BBQ
Tiles shall comply with NCC 3.9.1. 4
Tiles
FALL
L
RL 24.000
L
FA
TERRACE Concrete slab and footings to be in accordance
Brush fence to site boundary as required. Tiles with structural engineers design and detail.
Brush fence to be 1500mm above natural Provide fall away from building in accordance
RL 23.850
ground line. with NCC 3.1.2.3. Concrete to have selected slip
resistant external tiles laid in accordance with
manufacturers specifications.
3 shr
3
23
Robe
BASEMENT
SERVICES BED 3
Natural ventilation to un-enclosed Tiles
basement - for air-con & water heaters RL 24.000
BATH Carpet Existing brush side boundary fence
Tiles RL 24.000
RL 24.000
ENTRY
2 Tiles
RL 24.000 2
2,100 Rise: 139 x 9
LAUNDRY
Extg. Brush Fence to boundary
Going: 275 x 8
Tiles Timber stairs to be in accordance with structural
engineers design and detail. Finishes details to
1
RL 24.000
SERVICE architects future specifications. Stair to comply
2
with NCC 3.9.1. Provide frameless glass panels
3
DUCT 4
to form balustrade and 50mm dia. 316 stainless
Store
5
steel CHS handrail fixing brackets.
Lift
6
7
8 Store
9
Concrete block retaining wall in
24
accordance with structural engineers BACKFILL
design and detail. Apply Rockcote acrylic
render system with sponge finish &
painted with selected colour in Rise: 179 x 7
accordance with final colour selections. Going: 275 x 6
Refer to Rockcote for full coating system Concrete block wall to be in accordance with
details. Tank & waterproof in accordance
with Australian Standards
GARAGE structural engineers design and detail. Provide
Rockcote acrylic render system with sponge
Epoxy Floor Finish
finish and painted with selected colour in
RL 25.250 accordance with final colour selections. Refer to
Rockcote for full coating system details.
Selected random non-permanent sandstone
Line of floor over pavers set in pebble path.
(dashed)
1 1
RAMP
Grated Drain
Aluminium slated fence and gate. Powdercoat
1:10
290mm Concrete block retaining wall in
accordance with structural engineers finish
design and detail. Apply Rockcote acrylic
25
render system with sponge finish &
painted with selected colour in
accordance with final colour selections.
Refer to Rockcote for full coating system
details.
Selected concrete driveway to be in accordance
phil quayle architects
RAMP
6,000
1:4
with AS2890.1 and structural engineers design
26
and detail. Ph: 5473 0188 Fax: 5473 0199
PO Box 1235, Noosa Heads Q 4567
27
[email protected]
28
project:
29
RAMP
1:10
RESIDENCE
for
NOTE: Where change of level exceeds
1m, the retaining wall is to be extended to
give a min. 1m high balustrade to comply
A
with BCA.
3.1 Ingrid & Rob Aitken
Floor Plan - Ground Lot 23 Marcus Dunes Court
1:100 Castaways Beach
LOT NO. 23
PLAN NO. SP111721
DRAWN MD
SCALE (A2)
PROJECT NO.
1512-03
DRAWING NO.
1.2
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalUsed in these records
140307 NOOSA DUNES.PDFRelated documentApplication case desk ↗
About this file
- File size
- 1.6 MB (small file)
- File type
No other editions are linked here.