RFI - Screen Brochure

     MOUDLDED GRATING
     PRODUCT GUIDE



40
     1 6 . 3 J C L I P S | I N STA L L AT I O N
     J-Clips are designed to secure FRP Moulded Grating to the supporting structure by gripping the underside
     of the grating bars. These clips help prevent grating uplift and ensure stability, making them ideal for
     industrial, marine, and corrosive environments. The details below illustrates standard installation methods
     that can be applied to moulded grating. Clip and fastening selections should be made according to the
     substrate material in use.

     Fasteners                     J CLIP | 38x38 STANDARD GRATING ASSEMBLY


                M8x40                                        1
              Soc Cap Bolt

                                                        2
      1



                 M Clip
               CM3820-38

                                                             3
      2
                                                             4
                                                             5                                  CLIP ASSEMBLED

                  J Clip          Please note the above illustrations are simply a guide that show one example
                   CJ3838
                                  of how each clip can be installed. Clips can be paired with several types of
                                  grating and fasteners. Select the most appropriate method according to
      3                           design.



                                  13x13 Heel Guard & 19x19 Mini Mesh
                     M8                                                                                   M8x80
            SPRING WASHER         The installation process for J-Clips is the same                          CSK Bolt
                                  when working with both 13x13 and 19x19 Moulded
      4
                                  Grating. The only adjustment required is swapping            1
                                  the standard fasteners for an M8 Countersunk Bolt
                                  paired with a CR24-8-CS Washer.
                     M8
             SQUARE NUT           Note: When installing into 13x13 Moulded Grating,
      5                           you may need to drill out the hole slightly due to the              CR24-8-CS
                                  gritted surface to properly fit the M8 bolt.

                                                                                               2



     GRP-BR-02-REV02                                                                  M O U L D E D G R AT I N G 2 0 2 5