Council archive · source document
51989.128.01Approved Plan
Plans and drawings: the text below has words only, no drawings.
-
NOOSA COUNCIL
APPROVED PLAN
51989.128.01 23 OCT 2015
[OCR of page images]
GENERAL SPECIFICATION
All works to be in accordance with the
BUILDING CODE OF AUSTRALIA
and all other Codes and Standards as required.
Some notes may not apply to all projects
1. All structural timbers to comply with AS 1684-2006
2. Brickwork shall comply with AS 3700.
All brickwork shall be solidly bonded and laid on a full bed of 10mm. mortar
with all joints filed, Wall ties spaced at 460mm. cts horizontally and 610mm.
cts vertically or vice-versa and within 300mm of articulation joints, to comply
with AS 2699.
3, Subtloor ventilation;
- 150mm. min. bearer to ground clearance for strip flooring.
200mm. min. bearer to ground clearance for sheet flooring,
- Minimum 7500mmé/Metre of external masonry veneer wall.
- Minimum 22000mm#/Metre of internal dwarf walls.
- Weep holes at max. 1200mm. centres to comply with AS 3700.
4. Damp-proof courses to be an approved waterproof cement mortar or
bituminous paper placed 75mm. below floor level
‘Assecond course to be laid 1 or 2 brick courses higher.
5. Firebox inserts shall be installed in accordance with manufacturers
specifications and in accordance with AS 2918
6. Top soil and all organic matter to be removed from under where a concrete
slab-on-ground is to be poured.
7, Structural steel and concrete to comply with the Structural Engineer's
design and computations and shall take precedence over instructions on this,
plan
8. Reinforced concrete to be min. 25MPa. complying with AS 2870 - 1996,
{unless directed otherwise by structural Engineer) and;
- Trench mesh for concrete footings to be lapped a min. 500mm. and have a
top and/or bottom cover of min. 50mm, unless directed otherwise by
Engineer.
- Fabric mesh to be lapped a minimum of 225mm. and have a minimum top
and/or bottom cover of 25mm, unless directed otherwise by Engineer.
9. Garages, Open Garages and Carports to have a maximum height of
3600mm,when measured from the ground level to the top of the roofing, at or
within 100mm, of the Title boundary, and shall not be constructed so as to
reduce the open-to-sky space to less than 1000mm. from the edge of the
guttering/barge board to a habitable room window on it's own site.
10. Excavation of trenches for footings, drainage, sewerage, etc., to be in
accordance with the requirements of the local Controlling Authorities.
11. Smoke detectors to comply with AS 3786 and must also comply with the
BCA 3.7.2.
12. Safety switches to be installed to the requirements of the local
Controlling Authority
13. All glazing to comply with AS 1288-2006.
14. From information provided, the design wind speed is N3 (41m/s)
15. Insulation to comply with Clause F6.1 (Building Code of Australia) with a
minimum rating of
Timber Floors
- R2.5 min. to new habitable roof and/or ceiling areas only.
- R1.5 min. double sided foil to new external walls.
- R1.5 min. double sided expandable foil to new timber floors.
Concrete Floors
~ R2.5 min. to new habitable roof andlor ceiling areas only.
- R1.3 min. double sided foil to new external walls.
16. No part of any building to encroach Site or Title boundaries,
17. Provide Bush fire preventative measures where required by local Council
18.Stair design;
~ Risers 190mm, Maximum
115mm, Minimum
Treads 355mm. Maximum
240mm. Minimum
- Risers and Treads to be constant in size throughout the flight.
- Ensure gap between treads does not exceed 125mm. or provide infills to
block
access if larger.
Min. 2000mm. vertical head clearance when measured from the nosing of the
tread.
+ Stair to be min. 750mm. wide when measured clear of all obstructions.
- Handrail to be a constant minimum 865mm high above the nosing of treads
and minimum 1000mm. high above all landings, balconies and the like that
exceed 1000mm. above the finished adjacent ground or floor level
- Balusters and rails, etc., to have max. spacing of 125mm.
- Wire balustrading to comply with Table 3.9.2.1 of the BCA,
19. Uniess noted otherwise, all brick veneer wall dimensions to be 230mm., stud
walls to be 7mm MGP with all other walls as noted on Floor Plan.
20. Glass bricks to be laid in 3:1 mortar mix using fatty sand & waterproofing
agent with 6mm@. reinforcing rods every horizontal course. Set into jambs
1mm. min., perimeter panels to be sealed with silicon and/or foam expansions in
channel.
21. Figured dimensions shall always take precedence over scale
22. Termite prevention works must be in accordance with AS 3660.1 - 2000.
23. For buildings in close proximity to the sea, ensure that all steelwork, brick
cavity ties, steel lintels, etc. that are embedded or fixed into masonry, be
protected in accordance with AS 1650 or AS 3700-1988 Table 2.2, hot dipped
galvanised iron, stainless steel or cadmium coated,
24. The Builder to take all measures necessary to ensure the stability of new
and/or existing structures during construction and generally ensure the
watertightness of all works during construction
25. These plans have been prepared for the exclusive use of the customer and,
only for the purpose expressly notified to the author. Any other person who uses
or relies on these
plans without the written consent of Southern Cross Design & Drafting does so at
their own risk and no responsibilty is accepted by Southern Cross Design &
Drafting for such use and/or reliance.
26. DO NOT SCALE OFF DRAWINGS.
The Owner/Builder and/or subcontractor to confirm all dimensions, setbacks and
levels prior to commencing construction, ordering materials or preparing shop.
drawings and shall be responsible for ensuring that all building works conform to
the Building Code of Australia, AS codes (current editions) Building regulations,
local by-laws and Town Planning requirements. All discrepancies must be
referred to this office for clarification.
27. © COPYRIGHT WARNING.
This plan is the exclusive property of Southern Cross Design & Drafting and must
not be used, reproduced or copied, wholly or in part. Any infringement of the
Copyright will result in legal action being taken against both the Owner and/or
Builder.
28. These notes are neither exhaustive nor a substitute for regulations, statutory
requirements, building practice or contractual obligations and unless expressly
stated otherwise, are provided only as a guide.
No responsibility is accepted for their use.
29. These Drawings are to be used in conjuction with Engineering Drawings.
ISSUES.
Rev, Date —_ Description
DAIO1 05405-2015 PreliminaryDrawings
DAI02 20-05-2015 DevelopmentApplicaton
DAI03 04-06-2015 DevelopmentApplication
\ SOUTHERN CROSS aur Bl
design & drafting 22.23.
Commercial Residential Industrial
Scan here
OLS tm tm pgs
Se et iacwe
ciecmrmioennt
Soar
Ss crereen neater,
load anna pa shal ty overs
‘A >)
PROPOSED HALL EXTENSION
for
ANGLICAN CHURCH
at
LOT 2 BICENTENNIAL DRIVE, SUNSHINE BEACH
NN J
(- ~
PLAN SCHEDULE
A101 WD Cover Sheet
A102 Site Plan
A103 Floor Plan
A104 Elevations
A105 Elevations
A106 Section
A107 Slab Plan / Post Layout Plan
A108 Typical Wall Detail
NOOSA COUNCIL
APPROVED PLAN
51989.128.01 23 OCT 2015
X J
Drawn By: Pc PROPOSED HALL EXTENSION Sheet Number.)
Designed By: scopD Alol
Orig. Sheet Size: A3.
cong 20-8016 Lot 2 BICENTENNIAL Drive, WD Cover SHEET
SUNSHINE BEACH
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalFull text of the other 6 pages
Page 2
-
NOOSA COUNCIL
APPROVED PLAN
51989.128.01 23 OCT 2015
[OCR of page images]
— PROPOSED HALL
EXTENSION
r~ New Gully Pit
Toe of bank ——— New Gully Pit
“RL:
— New grated drain
EXISTING SHEDS
under new roof
New swale
drain. ———-}
Toe of bank
|
EXISTING |
CHURCH
BUILDING
Remove Gully
_ Pit
——~ 3 0"
87°43 ag» 36
3.106 m
SITE PLAN
SCALE: 1: 500
—— EXISTING DISABLED
PARK
54° 28' 01
45224 00° = 49.400 m
et 80
04g 08
NOOSA COUNCIL
APPROVED PLAN
51989.128.01 23 OCT 2015
w 080'St 1.
00 PY €ZE
RPD
Lot 2 on RP198277
PARISH of WEYBA
COUNTY of MARCH
AREA: 10528m?
GENERAL NOTES
- All survey pegs are to be sited in position
prior to the commencement of construction.
~
The dwelling is not to exceed 8.5m above the
Natural Ground Line.
e
The profile of the vehicle access drive is to be
as per Local Authority requirements.
=
The site is to be adequately drained to the Engineer's,
recommendation as set out in the soil report and
CSIRO recommendations for the maintenance of
residential slabs and footings.
a
Stormwater to on-site rain water storage tank and
street kerb in accordance with Local Authority
requirements,
2
All downpipes to be 90dia UPVC. Number off as shown.
. All dimensions are in millimetres.
©
. Household waste refer Engineer's design and details.
©
All dimensions to be checked prior to construction.
cing eatin ear at
Date:
20-5-2015
eee ES ae a Scan here")! (NOTES. areca eo paemtate Drawn By: PC PROPOSED HALL EXTENSION Sheet Number:
Fev. escripto Rigas Font poe oar, Designed By: TL
DAIOY 05-05-2015 _PreiinaryOrawings ir 8/174 BRISBANE RO, Rapetiasaiprbocmione salt aro2
DA102 2062015 Development Appcaton SOUTHERN CROSS wanzuzesmsemne fetta eS Checked By: = TL for
y/ design & drafting = Siereemeresineaeeey | Scale: == As inoicaren snentean wane .
‘Commercial Residential Industrial” 9884: 1110414 ri racy oto Orig. Sheet Size: a3 Site Plan
Lot 2 BICENTENNIAL DRIVE, SUNSHINE BEACH
Page 3
-
NOOSA COUNCIL
APPROVED PLAN
51989.128.01 23 OCT 2015
[OCR of page images]
LEGEND
© Smoke Detector D
7 pes — He © twg Floor Waste Gully
DP Downp
2700 250 250 HC Hose Cock & A
p
7A = a — AAR MB Meter Box
100 2600 250 2198 70 2198 70 2198 70 2198 250 hws Hot Water System B
$$ ye 464 ohc Overhead Cupboard
shr Shower
v AN BE BIE — 100x100 Peel Tt BX sk Sink ELEVATIONS
“eT SS HWD Posts vb Vanity Basin
wo Water Closet
8] clo Threshold ramps to ~~ Threshold ramps to = | _cvttvubo Cooktop/ Rangehood! Underbench Oven
a} a] § doorways ( 1in 40) doorways ( tin 40) a EXIT Exit & Emergency Lighting
a} a as required as required
PS eee 7 Re
4/2400 h Roller Shutters a 2 NOOSA COUNCIL
' | a APPROVED PLAN
- 2
5 g 8 MX 51989.128.01 23 OCT 2015
Jt ys Ny
5 z
a lz 5 _——— ee
~ < Raking ceiling 5 degrees ——— =
t\ lelole 3 He Area Schedule
gle -
A106 8] 3] 8 5 ell | —_____________|
eS Halll sors Name Area
g
ie . al 2 z [HALL ___ 142.83 m@
8 RL 50000 2 aga! gh [Verandah 1 1 c 34.16 m?|
2 ed a —3.1= Verandah 2 19.68 m2
196.67 m?
| Exist Patt 96.6
300w x 20001 Servery \
ek a e 2000 h Hamper rs GENERAL NOTES
Leanne [Bees Tollatf/ 23
| 2400 eeifag ( 3 2 Roo! water to be discharged to rainwater tank and
“AL 49700{f| | y street kerb in accordance with Local Authority
| 2700 ceiling Tequirements
- 74 Lobb Change Bs | o
3 | obby table 5 i Design is based upon N3 (Non-Cyclonic) for wind speeds
ol = \ zl want = | 3 ic to 4tm/s
2/8 : 28 g 3
=| 8 Kitchen\ 8 BL 8 2) % ; ; TERMITE PROTECTION
° | =~ P | a — Position of existing As per Australian Standard AS 3660.1 - 2000.
x i ° building TBC.
iyigt —— 2 02 Office 2500 = 8 Hatchings and fitings are indicative only
gt g
e <“ aoe Refer Builders Specitications.
ay | a ——
- SA | 4 AIL WC doors to have lit off hinges.
_ ean
2 1 i \ All wet areas to comply with current BCA requirements.
x _ BY le ‘ = ages
con DOES 3s Mo Line underside of external covered areas with
5 He s S15 FC sheeting
8 ‘0 ee WA : x
= 5 ‘Smoke Alarms to be installed in accordance
le & B L
g/ g| ge] ~ pee Heras an B 8 cua el with current BCA requirements.
8} 8/3 Verandah y & ° Smoke Alarms to comply with AS 3786.
+} Rebuild existingpaving &
é en. construct new paving Falls ‘All doors and windows are to be Aluminium framed
77 Vin 40 tall | § == 1 in 10 fal 2 Snow, unless noted otherwise.
2 Beam & (up) 2 ey
ae SE Ok OK 100 x 100 = — 3 Wall thickness for Cavity Sliding Doors to be 30mm
HWD Posts &
250 3320 70 2740 70 3500 380 : All dimensions to be checked prior to construction:
Pie : z -
FLOOR PLAN ¥* + Figured dimensions always take precedence - Do not
9500 = Membrane structure scale off drawings
—— — ——¢ over not shown. (by
1:100 others)
Scan here Note: Drawn By: PC PROPOSED HALL EXTENSION Sheet Number:
ISSUES. These drawings have boon prparad for y:
caer eos peneiatae B C seerememerit® 11 Designed By: TL aes
10 elminaryDrawings sir 5/174 eeisuane Ro, ioget ta reign Gaming a Y
DaI02 1805-2015 Development Applicaton SOUTHERN CROSS sree estas Checked By: TL for
. a Pu: sa7e Oza Scale: 1100 ANGLICAN CHURCH
design & drafting +e we a
Commercial Residential Industrial 9884 1110414 Orig. Sheet Size: A3 tos xe peive, SuNstine Bence Floor Plan
: : wor sQUTHERNEROSORAFTING.COM.AU Date: 5-5-2015 OT 2 BIGENTENNIAL DRIVE, SUNSHI
XN
Page 4
-
NOOSA COUNCIL
APPROVED PLAN
51989.128.01 23 OCT 2015
[OCR of page images]
PROPOSED EXTENSION
Colorbond Root Sheeting @ 10°
Pitch fixed to. manufacturer's
‘spec.& specified wind rating
Ceiling
Joinery
8
&
RL 50000
Floor
Site
— 100 x 100
HWD Posts,
ELEVATION A
SCALE: 1: 100
EXISTING
Selected F/C Sheeting
to Builders Contract
Membrane structure not
shown. (by others)
Colorbond Gutter & Fascia
Exsit walls NTS
Aluminium Framed Doors &
Windows fixed manutacturer's
spec.
Rendered & painted masonry
Veneer cladding to Builders
Contract
Colorbond Root Sheeting @ 10°
Pitch tixed to manutacturer's
spec.& specified wind rating
Aluminium Framed Doors
& Windows fixed
manulacturer's spec.
[— Colorbond Gutter & Fascia
502
[= 100x100
HWD Posts
FGL
FGL
100 x 100
HWD Posts
ELEVATION B
Rendered & painted masonry veneer
cladding to Builders Contract
NOOSA COUNCIL
APPROVED PLAN
51989.128.01 23 OCT 2015
SCALE: 1 100
ISSUES as esctiption ‘Scan here prawn By: / re PROPOSED HALL EXTENSION Sheet Number:
Be Beas ee SOUTHERN CROSS yxzusseen ee El Checked By, TL for Atos
DANG: ODE ANS" Deiscementiertesten design & drafting Fax 5470 0585 “ Scale: 1100 ANGLICAN CHURCH
geaa tr04t8 Orig. Sheet Size: a3 at Elevations
Commercial Residential Industrial
Date: 20-5-2015
Lot 2 BICENTENNIAL DRIVE, SUNSHINE BEACH
Page 5
-
NOOSA COUNCIL
APPROVED PLAN
51989.128.01 23 OCT 2015
[OCR of page images]
EXISTING
4 + ——
PROPOSED EXTENSION
—— Selected F/C Sheeting
to Builders Contract
Colorbond Root Sheeting @ 10°
Pitch fixed to. manufacturer's
spec.& specified wind rating
Colorbond
Gutter & Fascia
NOTES
Hatchings and fittings are indicative only.
Refer Builders Specifications.
Line underside of external covered areas
with FC sheeting
All doors and windows are to be Aluminium
framed unless noted otherwise.
Stairs & Balustrades to be constructed in
accordance with the current BCA Part
3.9.1- Stair Construction & Part 3.9.2 -
Balustrades
N3
Structural design based upon Non -
Cyclonic N3 for wind speeds to 41 mvs.
LEGEND
BV Brick Veneer Cladding
BB 190 Blockwall
[ce ——— | co Colorbond custom-orb Root Sheeting
DP Downpipe
FC FC Sheeting
Rendered & painted masonry —— 100 x 100 HC Hosecock
veneer cladding to Builders HWOD Posts MB Meterbox
Contract
ELEVATION G
SCALE: 1: 100
Colorbond Roof Sheeting @ 10° ee ry Aluminium Framed Doors
Pitch fixed to manufacturer's & Windows fixed
spec.& specified wind rating manutacturer's spec.
Colorbond °
Gutter & Fascia 25.0
Ceiling HT
Joinery * ~ Z
100 x 100 ———=| s| 8
8
HWD Posts | | oN TOs 7505 g| 8
870 /
Floor L. 06.09 | 06.09 V I
SiteLevel | = e— 74 7 x =i Pe FGL
Rendered & painted masonry
veneer cladding to Builders
Contract
ELEVATION D NOOSA COUNCIL
—_—___——_— APPROVED PLAN
' 51989.128.01 23 OCT 2015
ISSUES. ‘Scan here NOTES: nave toon Drawn By: PC PROPOSED HALL EXTENSION Sheet Number:
arya Unt 5/174 anmeane RO,
DA BROCE, ce in SOUTHERN CROSS waco at Checked By: TL for
DAI03 04-06-2015 _DevelopmentApplication design & drafting Dstsra sess. r Scale: 1:100 ANGLICAN CHURCH
at Resi Istria) Waa: 1110406 Orig. Sheet Size: a3 at Elevation:
Commercial Residential Industrial oe ee tile Bete vos-2015 Lo? 2) BIGENTENNTAL DANTE; UNSHIvE:HexcH evations
J
Page 6
-
NOOSA COUNCIL
APPROVED PLAN
51989.128.01 23 OCT 2015
[OCR of page images]
Existing wall NTS
25.0°
Plaster ceiling
& wall lining
Scissor trusses at 900 crs fixed
to manufacturer's spec.&
specified wind rating
Servery opening
SECTION 1
SCALE:
1
:50
— Scissor trusses at 900 crs fixed
to manufacturer's spec. &
specified wind rating
~—— Colorbond Roof Sheeting @ 10°
Pitch tixed to. manufacturer's
spec.& specified wind rating
——— Colorbond Gutter & Fascia
Cealing
Joinery
— Rendered & painted masonry
veneer cladding to Builders
Contract a
100 x 100 HWD Posts
Floor
Site Level
Slab & footings to engineers detail
He
2700
— Colorbond Root Sheeting @ 10°
Pitch fixed to. manufacturer's
spec. specified wind rating
Colorbond Gutter & Fascia
Ceiling
binary
= 100 x 100 HWD Posts
Rendered & painted masonry veneer
cladding to Builders Contract
Threshold / ramp TBA
Floor
pli tr a a
Raked ceiling Raked ceiling
° eye
&|
* Store Mall *|"
ee
Site Level
Slab & footings to engineers detail
NOOSA COUNCIL
APPROVED PLAN
51989.128.01 23 OCT 2015
SECTION 2
SCALE: 1: 100
ISSUES eserintion Scan here Drawn By: PC PROPOSED HALL EXTENSION Sheet Number:
ls Description Designed By: = TL aioe
Datot’ 05052018 Prlminnybx ic wt Hs
Bes Seca Sontedetn SOUTHERN CROSS exzzzeeee El Checked By: TL for
DA103 04-06-2015 DevelopmentApplication design & drafting Poe 8470 8a Scale: At iNOIGATED: Anouieas CHurcH /
Commercial Residential Industrial 9884: 1110414 Orig. Sheet Size: a3 al Section
Date:
20-5-2015,
Lot 2 BICENTENNIAL DRIVE, SUNSHINE BEACH
Page 7
-
APPROVED PLAN
NOOSA COUNCIL
51989.128.01 23 OCT 2015
[OCR of page images]
APPROVED PLAN
- a. NOOSA COUNCIL
Clearing & Siteworks Report 51989.128.01 23 OCT 2015 my ref: 123-018
St Andrew's Church Site 9 July 2015
J
| /
:
/ Pog -
FA [ 3000
!
. od “-
y EXTENT OF AREA
¢ «
REDUCE MOUND - UAB _-& _@ TOBE CLEARED
GRADE DOWN TO L a , AND EXCAVATED
RL50.00 ~~ ae y
e ; L ak ef a
Le OF 3
é EXTENT OF PROPOSED af = |
C "25 BUILDING WORKS. oo
EXCAVATE TORL 49.80 4 —a]
ce e
(MAX. 4.7m DEEP) y |
ba a
Hoesbiy sfrmsices
TBM
Screw in Path
RL 49.98
ARBITRARY
rl oe
ARROWS INDICATE VIEWP@\NT FOR THE oe
PHOTOGRAPHS ON THE FOLXOWING PAGES 3°
a
»
oe
FIGURE 14
Used in these records
51989.128.01Approved Plan.pdfRelated documentApplication case desk ↗
About this file
- File size
- 5.1 MB (large file)
- File type
No other editions are linked here.
Original file
Log in to download the original file
The download may take up to a minute.