Council archive · source document
Compliance Certificate for FloatBricks (1) · OPW17/0601
Attached to the e-mail Operational Works Application OPW17/0601- 28 Mermaid Quay.
Attached to the e-mail Operational Works Application OPW19/0108 - DA Form 1, Plans - 4 Neptune Circuit Noosaville.
Attached to the e-mail Jetty Application - 23 Seamount Quay Noosaville.
Version 3 – March 2013
Form 15—Compliance Certificate for building Design or Specification
NOTE This is to be used for the purposes of section 10 of the Building Act 1975 and/or section 46 of the
Building Regulation 2006.
RESTRICTION: A building certifier (class B) can only give a compliance certificate about whether
building work complies with the BCA or a provision of the QDC. A building certifier (Class B) can
not give a certificate regarding QDC boundary clearance and site cover provisions.
1. Property description Street address (include no., street, suburb / locality & postcode)
This section need only be completed if
details of street address and property
‘generic’
description are applicable. Postcode
EG. In the case of (standard/generic)
pool design/shell manufacture and/or
Lot & plan details (attach list if necessary)
patio and carport systems this section
may not be applicable.
In which local government area is the land situated?
The description must identify all land the ‘generic’
subject of the application.
The lot & plan details (eg. SP / RP) are
shown on title documents or a rates notice.
If the plan is not registered by title, provide
previous lot and plan details.
2. Description of component/s certified
Clearly describe the extent of work covered by
this certificate, e.g. all structural aspects of the ‘FLOATBRICKS’ POLYETHYLENE (basic) FLOAT MODULE
steel roof beams.
(500mm x 500mm x 400mm) and ANCILLARY CONNECTIONS
when used in specific configurations as determined by the Designer:
- minimum 5 modules wide (2500mm o’all) per length / run when
unpiered
- minimum 4 modules wide (2000mm o’all) per length / run when
suitably (mooring) piered
3. Basis of certification
Detail the basis for giving the certificate and the AS1170.1, AS1170.2, AS3962 (part), AS4997
extent to which tests, specifications, rules,
standards, codes of practice and other BUILDING CODE OF AUSTRALIA (part)
publications, were relied upon.
Max loading: 1.8Kn point [email protected] wall thickness / 2.7 kPa
@ freeboard ~ 100mm in salt water
4. Reference documentation
Clearly identify any relevant documentation, - DOCKPRO (Australia) design specifications
e.g. numbered structural engineering plans.
- SRB Consulting Engineers performance testing calculations
LOCAL GOVERNMENT USE ONLY
Date received Reference Number/s
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalFull text of the other 1 page
Page 2
5. Building certifier reference number Building certifier reference number
6. Competent person details Name (in full)
A competent person for building work, means a
person who is assessed by the building certifier Stephen Belyea
for the work as competent to practise in an
Company name (if applicable) Contact person
aspect of the building and specification design,
of the building work because of the individual’s SRB CONSULTING ENGINEERS Stephen Belyea
skill, experience and qualifications in the
aspect. The competent person must also be Phone no. business hours Mobile no. Fax no.
registered or licensed under a law applying in 0400 379 908 (07) 55 648 307
the State to practice the aspect.
Email address
If no relevant law requires the individual to be
licensed or registered to be able to give the [email protected]
help, the certifier must assess the individual as
having appropriate experience, qualifications or Postal address
skills to be able to give the help. 25 Waratah Ave
If the chief executive issues any guidelines for BIGGERA WATERS Postcode 4216
assessing a competent person, the building
certifier must use the guidelines when Licence or registration number (if applicable)
assessing the person.
RPEQ 6204
7. Signature of competent person Signature Date
This certificate must be signed by the individual
assessed by the building certifier as competent.
8 December 2015
Used in these records
Compliance Certificate for FloatBricks (1).pdfRelated documentApplication case desk ↗
Compliance Certificate for FloatBricks (1).pdfRelated documentApplication case desk ↗
Compliance Certificate for FloatBricks (1).pdfRelated documentApplication case desk ↗
About this file
- File size
- 458 KB (small file)
- File type
No other editions are linked here.