Original source · versioned page text
Development Application Part 1 of 2 - IDAS Forms 1 & 6 and Cover Letter - OPW13/0033
<,.
to the application.
Applications for building work (including extensions and assessable demolition)
Floor plans drawn to an appropriate scale (1:50, 1:1 00 or 1 :200 are D Confirmed
recommended scales) which show the following:
~ ~ot applicable
. the north point
. the intended use of each area on the floor plan (for commercial, industrial
or mixed use developments only)
. the room layout (for residential development only) with all rooms clearly
labelled
the existing and the proposed built form (for extensions only)
. the gross floor area of each proposed floor area.
Elevations drawn to an appropriate scale (1:1 00, 1 :200 or 1 :500 are D Confirmed
recommended scales) which show plans of all building elevations and
facades, clearly labelled to identify orientation (e.g. north elevation).
~ lot applicable
.
Plans showing the size, location, proposed site cover, proposed maximum D Confirmed
number of storeys, and proposed maximum height above natural ground level
of the proposed new building work. ~ Jot applicable
Plans showing the extent of any assessable demolition. D Confirmed
x \lot applicable
Applications for operational work involving earthworks (filling and excavating)
drawings showing: D Confirmed
existing and proposed contours Lx lot applicable
.areas to be cut and filled
. the location and level of any permanent sUNey marks or reference
stations used as datum for the works
the location of any proposed retaining walls on the relevant land and their
height
. the defined flood level (if applicable)
. the defined fill level (if applicable).
Applications for operational work involving roadworks
Drawings showing: D Confirmed
existing and proposed contours Lx lot applicable
the centreline or construction line showing chainages, bearings, offsets if
the construction line is not the centreline of the road and all intersection
points
. information for each CUNe including tangent point chainages and offsets,
length, tangent length, superelevation (if applicable) and
CUNe radii, arc
widening (if applicable)
CUNe
kerb lines including kerb radii (where not parallel to centreline) and
tangent point changes (where not parallel to centreline)
.
edge of pavement where kerb is not constructed
.
position and extent of channelisation
.location and details of all traffic signs, guideposts, guardrail and other
street furniture
.
pavement markings including details on raised pavement markers
catchpit, manhole and pipeline locations
.
drainage details (if applicable)
.cross road
drainage culverts (if applicable)
.concrete footpaths and cycle paths
.location and details for access points, ramps and invert crossings
3 IDAS form 6-Building or operational work assessable against a planning scheme
Version 2.0 17 December 2012
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalLog in to download the original file
The download may take up to a minute.