Skip to the record
The first. The best. The only NoosaWatch™.

Original source · versioned page text

Lanscaping Specification URB-P0003847-000-SP-240719

of 60

Page text shows just the words. Original shows the document exactly as it was published.

 Mulch –100mm depth, ‘Medium’ grade, aged / composted hoop pine bark fines
 Soil A - 300mm depth ‘On Grade soil media A’
 Soil B - where trees are planted, 600mm depth ‘On Grade soil media B’

 Subgrade Preparation - Remove all existing weed material using glyphosate herbicide (to be applied minimum
 two weeks prior to lawn installation). Rip to 250mm depth. Where clay conditions are found, incorporate
 gypsum or clay breaker at the rate of 100g/m2

 Note: Soil types under D&C arrangement - compliant to relevant AS and codes.


 GA07: Garden Bed Profile – Community Garden Planter beds
 Mulch - 50mm depth, Sugarcane mulch
 Soil - 300mm depth ‘On Slab soil media A’. Refer to Section – Soils, for test results criteria,
 300mm depth ‘On Slab soil media B’. Refer to Section – Soils, for test results criteria.

 Sand filter - 50mm depth (depth varies) to bottom of planter

 Note: Soil types under D&C arrangement - compliant to relevant AS and codes.


 GA08: Garden Bed Profile – On Grade without mulch
 Mulch – no
 Soil A - 200mm depth ‘On Grade soil media A’ - Optimum Soil Type is Sandy Loam
 Subgrade Preparation - Remove all existing weed material using glyphosate herbicide (to be applied minimum
 two weeks prior to lawn installation). Rip to 150mm depth.

 Note: Soil types under D&C arrangement - compliant to relevant AS and codes.

 Note that these areas are for seeding application:
 Optimum Sowing Temperature: Between 15 and 25 degrees celsius
 Watering:
 All landscaped areas need water in dry periods.
 Dichondra will need additional irrigation in hot Summer months. Water at least twice a week – more frequently
 in extreme weather weeks.
 *During the first 30 days after seeding watering may be necessary 3-4 times a day. Seed should not be
 allowed to dry out.
 Starter Fertiliser:
 We recommend KickStart - a Starter Fertiliser to ensure successful germination.
 Apply 3kg of fertiliser per 100sqm (30 g/m2)
 Sowing Rate:
 New Sowing: 1kg per 100m2




URBIS
URB-P0003847-000-SP.DOCX                                                                               PAGE   39
Log in to download the original file

Lanscaping Specification URB-P0003847-000-SP-240719.pdf · 1.5 MB (small file)

The supporting record

Open full page ↗

Source document

Analyse documents ↗Open full page ↗

My Comparisons

Choose two to four records of the same kind. Drag using a handle or use the “Compare” buttons.

Your selected records are saved in this browser for your account. Results use the filters on the page where you choose “Compare selected”.