Lanscaping Specification URB-P0003847-000-SP-240719

 Planting Hole - Excavate a hole no deeper than the rootball. Place course sand layer under tree or palm
 rootball to ensure the top of rootball is level with finished top of soil level.
 Watering Dish - Form a 50mm high, 600mm diameter mounded soil watering dish around the tree. Infill the
 water dish with mulch.
 Root Anchor and Foam Block – Platipus tree anchoring systems and Foam Block as above


 Plant Installation: 400mm – 140mm pot – On Grade and On Structure

 Planting Hole - Excavate a hole no deeper than the rootball. The hole is to be 3 times the diameter of the
 rootball.
 Watering Dish - Form a mounded soil watering dish around the plant. Infill the water dish with mulch ensuring
 no mulch is in contact with the plant crown.


 Plant Installation: 75mm tubes– On Grade and On Structure
 Planting Hole - Hole diameter: The hole is to be 3 times the diameter of the rootball. Hole depth: Subsurface
 material at the bottom of the hole shall be decompacted to a depth of 100 mm and lightly compacted
 Watering Dish - Form a mounded soil watering dish around the plant. Infill the water dish with mulch ensuring
 no mulch is in contact with the plant crown.




URBIS
URB-P0003847-000-SP.DOCX                                                                                PAGE   46