Original source · versioned page text
03_Mar.lst
From the archive CALMET_OBS.zip (folder CALMET_OBS/MAR), inside D21030-2_NoosaSprings_Files ODOUR MODELLING - Part RFI.zip. File date in the archive: 2017-11-09 21:24.
PARAMETERS
Minimum radius of influence used in
the wind field interpolation (RMIN) Default: 0.1 ! RMIN = 0.1 !
Units: km
Radius of influence of terrain
features (TERRAD) No default ! TERRAD = 2.0 !
Units: km
Relative weighting of the first
guess field and observations in the
SURFACE layer (R1) No default ! R1 = 4. !
(R1 is the distance from an Units: km
observational station at which the
observation and first guess field are
equally weighted)
Relative weighting of the first
guess field and observations in the
layers ALOFT (R2) No default ! R2 = 10. !
(R2 is applied in the upper layers Units: km
in the same manner as R1 is used in
the surface layer).
Relative weighting parameter of the
prognostic wind field data (RPROG) No default ! RPROG = 0. !
(Used only if IPROG = 1) Units: km
------------------------
Maximum acceptable divergence in the
divergence minimization procedure
(DIVLIM) Default: 5.E-6 ! DIVLIM= 5.0E-06 !
Maximum number of iterations in the
divergence min. procedure (NITER) Default: 50 ! NITER = 50 !
Number of passes in the smoothing
procedure (NSMTH(NZ))
NOTE: NZ values must be entered
Default: 2,(mxnz-1)*4 ! NSMTH = 2 , 4 , 4 , 4 , 4 , 4 , 4 , 4 , 4 , 4 , 4 , 4 !
Maximum number of stations used in
each layer for the interpolation of
data to a grid point (NINTR2(NZ))
NOTE: NZ values must be entered Default: 99. ! NINTR2 = 99 , 99 , 99 , 99 , 99 , 99 , 99 , 99 , 99 , 99 , 99 , 99 !
Critical Froude number (CRITFN) Default: 1.0 ! CRITFN = 1. !
Empirical factor controlling the
influence of kinematic effects
(ALPHA) Default: 0.1 ! ALPHA = 0.1 !
Multiplicative scaling factor for
extrapolation of surface observations
to upper layers (FEXTR2(NZ)) Default: NZ*0.0
! FEXTR2 = 0., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0. !
(Used only if IEXTRP = 3 or -3)
BARRIER INFORMATION
Number of barriers to interpolation
of the wind fields (NBAR) Default: 0 ! NBAR = 0 !
Level (1 to NZ) up to which barriers
apply (KBAR) Default: NZ ! KBAR = 1 !
THE FOLLOWING 4 VARIABLES ARE INCLUDED
ONLY IF NBAR > 0
NOTE: NBAR values must be entered No defaults
for each variable Units: km
X coordinate of BEGINNING
of each barrier (XBBAR(NBAR)) ! XBBAR = 0. !
Y coordinate of BEGINNING
of each barrier (YBBAR(NBAR)) ! YBBAR = 0. !
X coordinate of ENDING
of each barrier (XEBAR(NBAR)) ! XEBAR = 0. !
Y coordinate of ENDING
of each barrier (YEBAR(NBAR)) ! YEBAR = 0. !
DIAGNOSTIC MODULE DATA INPUT OPTIONS
Surface temperature (IDIOPT1) Default: 0 ! IDIOPT1 = 0 !
0 = Compute internally from
hourly surface observations or prognostic fields
1 = Read preprocessed values from
a data file (DIAG.DAT)
Surface met. station to use for
the surface temperature (ISURFT) Default: -1 ! ISURFT = -1 !
(Must be a value from 1 to NSSTA,
or -1 to use 2-D spatially varying
surface temperatures,
or -2 to use a domain-average prognostic
surface temperatures (only with ITPROG=2))
(Used only if IDIOPT1 = 0)
--------------------------
Temperature lapse rate used in the Default: 0 ! IDIOPT2 = 0 !
computation of terrain-induced
circulations (IDIOPT2)
0 = Compute internally from (at least) twice-daily
upper air observations or prognostic fields
1 = Read hourly preprocessed values
from a data file (DIAG.DAT)
Upper air station to use for
the domain-scale lapse rate (IUPT) Default: -1 ! IUPT = -1 !
(Must be a value from 1 to NUSTA,
or -1 to use 2-D spatially varying lapse rate,
or -2 to use a domain-average prognostic
lapse rate (only with ITPROG>0))
(Used only if IDIOPT2 = 0)
--------------------------
Depth through which the domain-scale
lapse rate is computed (ZUPT) Default: 200. ! ZUPT = 200. !
(Used only if IDIOPT2 = 0) Units: meters
--------------------------
Initial Guess Field Winds
(IDIOPT3) Default: 0 ! IDIOPT3 = 0 !
0 = Compute internally from
observations or prognostic wind fields
1 = Read hourly preprocessed domain-average wind values
from a data file (DIAG.DAT)
Upper air station to use for
the initial guess winds (IUPWND) Default: -1 ! IUPWND = -1 !
(Must be a value from -1 to NUSTA, with
-1 indicating 3-D initial guess fields,
and IUPWND>1 domain-scaled (i.e. constant) IGF)
(Used only if IDIOPT3 = 0 and noobs=0)
--------------------------------------
Bottom and top of layer through
which the domain-scale winds
are computed
(ZUPWND(1), ZUPWND(2)) Defaults: 1., 1000. ! ZUPWND= 1., 1000. !
(Used only if IDIOPT3 = 0, NOOBS>0 and IUPWND>0) Units: meters
--------------------------
Observed surface wind components
for wind field module (IDIOPT4) Default: 0 ! IDIOPT4 = 0 !
0 = Read WS, WD from a surface
data file (SURF.DAT)
1 = Read hourly preprocessed U, V from
a data file (DIAG.DAT)
Observed upper air wind components
for wind field module (IDIOPT5) Default: 0 ! IDIOPT5 = 0 !
0 = Read WS, WD from an upper
air data file (UP1.DAT, UP2.DAT, etc.)
1 = Read hourly preprocessed U, V from
a data file (DIAG.DAT)
LAKE BREEZE INFORMATION
Use Lake Breeze Module (LLBREZE)
Default: F ! LLBREZE = F !
Number of lake breeze regions (NBOX) ! NBOX = 0 !
X Grid line 1 defining the region of interest
! XG1 = 0. !
X Grid line 2 defining the region of interest
! XG2 = 0. !
Y Grid line 1 defining the region of interest
! YG1 = 0. !
Y Grid line 2 defining the region of interest
! YG2 = 0. !
X Point defining the coastline (Straight line)
(XBCST) (KM) Default: none ! XBCST = 0. !
Y Point defining the coastline (Straight line)
(YBCST) (KM) Default: none ! YBCST = 0. !
X Point defining the coastline (Straight line)
(XECST) (KM) Default: none ! XECST = 0. !
Y Point defining the coastline (Straight line)
(YECST) (KM) Default: none ! YECST = 0. !
Number of stations in the region Default: none ! NLB = 0 !
(Surface stations + upper air stations)
Station ID's in the region (METBXID(NLB))
(Surface stations first, then upper air stations)
! METBXID = 0 !
!END!
-------------------------------------------------------------------------------
INPUT GROUP: 6 -- Mixing Height, Temperature and Precipitation Parameters
--------------
EMPIRICAL MIXING HEIGHT CONSTANTS
Neutral, mechanical equation
(CONSTB) Default: 1.41 ! CONSTB = 1.41 !
Convective mixing ht. equation
(CONSTE) Default: 0.15 ! CONSTE = 0.15 !
Stable mixing ht. equation
(CONSTN) Default: 2400. ! CONSTN = 2400.!
Overwater mixing ht. equation
(CONSTW) Default: 0.16 ! CONSTW = 0.16 !
Absolute value of Coriolis
parameter (FCORIOL) Default: 1.E-4 * FCORIOL = *
Units: (1/s)
SPATIAL AVERAGING OF MIXING HEIGHTS
Conduct spatial averaging
(IAVEZI) (0=no, 1=yes) Default: 1 ! IAVEZI = 1 !
Max. search radius in averaging
process (MNMDAV) Default: 1 ! MNMDAV = 10 !
Units: Grid
cells
Half-angle of upwind looking cone
for averaging (HAFANG) Default: 30. ! HAFANG = 30. !
Units: deg.
Layer of winds used in upwind
averaging (ILEVZI) Default: 1 ! ILEVZI = 1 !
(must be between 1 and NZ)
CONVECTIVE MIXING HEIGHT OPTIONS:
Method to compute the convective
mixing height(IMIHXH) Default: 1 ! IMIXH = 1 !
1: Maul-Carson for land and water cells
-1: Maul-Carson for land cells only -
OCD mixing height overwater
2: Batchvarova and Gryning for land and water cells
-2: Batchvarova and Gryning for land cells only
OCD mixing height overwater
Threshold buoyancy flux required to
sustain convective mixing height growth
overland (THRESHL) Default: 0.0 ! THRESHL = 0. !
(expressed as a heat flux units: W/m3
per meter of boundary layer)
Threshold buoyancy flux required to
sustain convective mixing height growth
overwater (THRESHW) Default: 0.05 ! THRESHW = 0.05 !
(expressed as a heat flux units: W/m3
per meter of boundary layer)
Option for overwater lapse rates used
in convective mixing height growth
(ITWPROG) Default: 0 ! ITWPROG = 1 !
0 : use SEA.DAT lapse rates and deltaT (or assume neutral
conditions if missing)
1 : use prognostic lapse rates (only if IPROG>2)
and SEA.DAT deltaT (or neutral if missing)
2 : use prognostic lapse rates and prognostic delta T
(only if iprog>12 and 3D.DAT version# 2.0 or higher)
Land Use category ocean in 3D.DAT datasets
(ILUOC3D) Default: 16 ! ILUOC3D = 16 !
Note: if 3D.DAT from MM5 version 3.0, iluoc3d = 16
if MM4.DAT, typically iluoc3d = 7
OTHER MIXING HEIGHT VARIABLES
Minimum potential temperature lapse
rate in the stable layer above the
current convective mixing ht. Default: 0.001 ! DPTMIN = 0.001 !
(DPTMIN) Units: deg. K/m
Depth of layer above current conv.
mixing height through which lapse Default: 200. ! DZZI = 200. !
rate is computed (DZZI) Units: meters
Minimum overland mixing height Default: 50. ! ZIMIN = 50. !
(ZIMIN) Units: meters
Maximum overland mixing height Default: 3000. ! ZIMAX = 3000. !
(ZIMAX) Units: meters
Minimum overwater mixing height Default: 50. ! ZIMINW = 50. !
(ZIMINW) -- (Not used if observed Units: meters
overwater mixing hts. are used)
Maximum overwater mixing height Default: 3000. ! ZIMAXW = 3000. !
(ZIMAXW) -- (Not used if observed Units: meters
overwater mixing hts. are used)
OVERWATER SURFACE FLUXES METHOD and PARAMETERS
(ICOARE) Default: 10 ! ICOARE = 10 !
0: original deltaT method (OCD)
10: COARE with no wave parameterization (jwave=0, Charnock)
11: COARE with wave option jwave=1 (Oost et al.)
and default wave properties
-11: COARE with wave option jwave=1 (Oost et al.)
and observed wave properties (must be in SEA.DAT files)
12: COARE with wave option 2 (Taylor and Yelland)
and default wave properties
-12: COARE with wave option 2 (Taylor and Yelland)
and observed wave properties (must be in SEA.DAT files)
Note: When ICOARE=0, similarity wind profile stability PSI functions
based on Van Ulden and Holtslag (1985) are substituted for
later formulations used with the COARE module, and temperatures
used for surface layer parameters are obtained from either the
nearest surface station temperature or prognostic model 2D
temperatures (if ITPROG=2).
Coastal/Shallow water length scale (DSHELF)
(for modified z0 in shallow water)
( COARE fluxes only)
Default : 0. ! DSHELF = 0. !
units: km
COARE warm layer computation (IWARM) ! IWARM = 0 !
1: on - 0: off (must be off if SST measured with
IR radiometer) Default: 0
COARE cool skin layer computation (ICOOL) ! ICOOL = 0 !
1: on - 0: off (must be off if SST measured with
IR radiometer) Default: 0
RELATIVE HUMIDITY PARAMETERS
3D relative humidity from observations or
from prognostic data? (IRHPROG) Default:0 ! IRHPROG = 1 !
0 = Use RH from SURF.DAT file
(only if NOOBS = 0,1)
1 = Use prognostic RH
(only if NOOBS = 0,1,2)
TEMPERATURE PARAMETERS
3D temperature from observations or
from prognostic data? (ITPROG) Default:0 ! ITPROG = 2 !
0 = Use Surface and upper air stations
(only if NOOBS = 0)
1 = Use Surface stations (no upper air observations)
Use MM5/3D.DAT for upper air data
(only if NOOBS = 0,1)
2 = No surface or upper air observations
Use MM5/3D.DAT for surface and upper air data
(only if NOOBS = 0,1,2)
Interpolation type
(1 = 1/R ; 2 = 1/R**2) Default:1 ! IRAD = 1 !
Radius of influence for temperature
interpolation (TRADKM) Default: 500. ! TRADKM = 500. !
Units: km
Maximum Number of stations to include
in temperature interpolation (NUMTS) Default: 5 ! NUMTS = 5 !
Conduct spatial averaging of temp-
eratures (IAVET) (0=no, 1=yes) Default: 1 ! IAVET = 1 !
(will use mixing ht MNMDAV,HAFANG
so make sure they are correct)
Default temperature gradient Default: -.0098 ! TGDEFB = -0.0098 !
below the mixing height over Units: K/m
water (TGDEFB)
Default temperature gradient Default: -.0045 ! TGDEFA = -0.0045 !
above the mixing height over Units: K/m
water (TGDEFA)
Beginning (JWAT1) and ending (JWAT2)
land use categories for temperature ! JWAT1 = 999 !
interpolation over water -- Make ! JWAT2 = 999 !
bigger than largest land use to disable
PRECIP INTERPOLATION PARAMETERS
Method of interpolation (NFLAGP) Default: 2 ! NFLAGP = 2 !
(1=1/R,2=1/R**2,3=EXP/R**2)
Radius of Influence (SIGMAP) Default: 100.0 ! SIGMAP = 100. !
(0.0 => use half dist. btwn Units: km
nearest stns w & w/out
precip when NFLAGP = 3)
Minimum Precip. Rate Cutoff (CUTP) Default: 0.01 ! CUTP = 0.01 !
(values < CUTP = 0.0 mm/hr) Units: mm/hr
!END!
-------------------------------------------------
NOTICE: Starting year in control file sets the
expected century for the simulation. All
YY years are converted to YYYY years in
the range: 1966 2065
-------------------------------------------------
-------------------------------------------------
NOTICE: Starting year in control file sets the
expected century for the simulation. All
YY years are converted to YYYY years in
the range: 1966 2065
-------------------------------------------------
Grid origin coordinates: (SW corner of cell 1,1)
XMAP0 = 505.984985 (km)
YMAP0 = 7075.88477 (km)
N.Lat0 = -26.4373035 (deg)
E.Lon0 = 153.060028 (deg)
W.Lon0 = -153.060028 (deg)
NO SURFACE STATIONS - noobs MUST BE = 2
NO UPPER AIR STATIONS - noobs MUST BE >= 1
NO PRECIPITATION STATIONS
Input group no. 1 -- General run parameters
Run starting date -- year: 2016
month: 3
day: 1
Julian day: 61
hour: 0
second: 0
Run ending date -- year: 2016
month: 4
day: 1
Julian day: 92
hour: 0
second: 0
UTC time zone: UTC+1000
Run length (hours): 744
Run type: 1 (0=winds only, 1=winds + other met. variables)
Complete met fields computed: T
TEST mode run: 2 (1=yes, 2=no)
Regulatory check: 0 (0=none, 1=USEPA)
Input group no. 2 -- Grid parameters
No. horizontal grid cells: 94 x 94
Horizontal grid size (m): 50.
Reference coordinates of
SW corner of grid cell (1,1): ( 505985.,7075885.)
N.Latitude SW corner of (1,1): -26.44
W.Longitude SW corner of (1,1): -153.06
Map Projection: UTM
NIMA Datum ID: WGS-84
NIMA Date: 02-21-2003
UTM Hemisphere: S
UTM Zone: 56
No. vertical grid cells: 12
Vertical cell face heights (m): 0.0 20.0 60.0 100.0 150.0 200.0 250.0 350.0 500.0 800.0 1600.0 2600.0
4600.0
Cell center heights (m): 10.0 40.0 80.0 125.0 175.0 225.0 300.0 425.0 650.0 1200.0 2100.0 3600.0
Input group no. 3 -- Output options
Meteorological fields save in disk file ? (LSAVE) = T
Format of output file (IFORMO) = 1 (1=CALMET, 2=MESOPAC II)
Meteorological fields printed ? (LPRINT) = F
Print interval (IPRINF) = 1
Input met. data and internal parameters printed ? (LDB) = F
Time steps for which LDB parameters printed (NN1, NN2) = 1 to 2
Distance to the coast printed in grd file? (LDBCST) = F
Control variables for printing of 3-D fields
(used only if LPRINT = .TRUE.)
(0=not printed, 1=printed)
LEVEL U,V W TEMP
1 0 0 0
2 0 0 0
3 0 0 0
4 0 0 0
5 0 0 0
6 0 0 0
7 0 0 0
8 0 0 0
9 0 0 0
10 0 0 0
11 0 0 0
12 0 0 0
Control variables for printing of other met. fields
(used only if LPRINT = .TRUE.)
VARIABLE PRINTED (0=no, 1=yes)
PGT stability class 0
Friction velocity (u*) 0
Monin-Obukhov length (L) 0
Mixing height (zi) 0
Convective velocity scale (w*) 0
Precipitation rate 0
Sensible heat flux (Qh) 0
Convective mixing ht 0
Input group no. 4 -- Meteorological data options
MM4/5 only flag (NOOBS): 2
No. surface stations: 0 Format type: 2
No. rawinsonde stations: 0
No. precipitation stations: -1 Format type: 2
(if NPSTA = -1: precipitation read from MM5)
No. overwater stations: 0
(Format type 1=unformatted, 2=formatted)
Gridded cloud data option: 4 (0=CLOUD.DAT not used,
1=CLOUD.DAT created as OUTPUT,
2=CLOUD.DAT read as INPUT,
3=CLOUD computed from progn. RH at 850mb (Teixera),
4=CLOUD computed from progn. RH at all levels(MM5toGrads)
Input group no. 5 -- Wind field parameters
Wind field code = 1 (0 = objective analysis, 1 = diagnostic)
Varying radius of influence (LVARY) = F
Radius of influence - land - surface (rmax1) = 4.0 (km)
Radius of influence - land - aloft (rmax2) = 10.0 (km)
Radius of influence - water (rmax3) = 10.0 (km)
Radius of influence - minimum (rmin) = 0.1 (km)
Radius of influence - terrain (terrad) = 2.0 (km)
Weighting parameter - surface (r1) = 4.0
Weighting parameter - aloft (r2) = 10.0
Maximum no. stations used in interpolation at one grid point in each level (nintr2):
99 99 99 99 99 99 99 99 99 99 99 99
Gridded prognostic model results used as input = 14
0 = no
1 = Use CSUMM model winds as Step 1 inputs
2 = Use CSUMM model winds as initial guess field
3 = Use MM4.DAT file winds as Step 1 inputs
4 = Use MM4.DAT file winds as initial guess field
5 = Use MM4.DAT file winds as "observations"
13 = Use MM5.DAT file winds as Step 1 inputs
14 = Use MM5.DAT file winds as initial guess field
15 = Use MM5.DAT file winds as "observations"
Weighting parameter for prognostic data (rprog) = 0.0 (km)
Prognostic model output timestep (seconds): 3600
Use coarse CALMET fields as IGF: 0
0 = no
1 = yes
LAKE BREEZE parameters
Utilize the Lake Breeze Module of CALMET (LLBREZE) = F
Number of regions (NBOX) = 0
divlim,niter = 4.99999987E-06 50
nsmth 2 4 4 4 4 4 4 4 4 4 4 4
iextrp = 1 rmin2 = 4.00000000 fextr2 = 0.00000000E+00 0.00000000E+00 0.00000000E+00 0.00000000E+00 0.00000000E+00 0.00000000E+00 0.00000000E+00 0.00000000E+00 0.00000000E+00 0.00000000E+00 0.00000000E+00 0.00000000E+00
bias = 0.00000000E+00 0.00000000E+00 0.00000000E+00 0.00000000E+00 0.00000000E+00 0.00000000E+00 0.00000000E+00 0.00000000E+00 0.00000000E+00 0.00000000E+00 0.00000000E+00 0.00000000E+00
critfn,terrad,ifradj,ikine,alpha,iobr = 1.00000000 2.00000000 1 0 0.100000001 0
islope,icalm 1 0
nzprn2,ipr0,ipr1,ipr2,ipr3,ipr4,ipr5,ipr6,ipr7,ipr8,ioutd = 1 0 0 0 0 0 0 0 0 0 0
Specification for diagnostic wind module data input
Surface temperature: 0 (0=computed internally, 1=preprocessed values input)
Domain-averaged temp. lapse rate: 0 (0=computed internally, 1=preprocessed values input)
Domain-averaged wind components: 0 (0=computed internally, 1=preprocessed values input)
Surface wind components: 0 (0=computed internally, 1=preprocessed values input)
Upper air wind components: 0 (0=computed internally, 1=preprocessed values input)
2-D varying temperature lapse rate (IUPT=-1)
Interpolating prognostic data
Depth through which temp.lapse rate is computed (ZUPT): 200.000000
Input group no. 6 -- Mixing height, temperature, radiation and precipitation parameters
Neutral mechanical mix. ht. constant (constb) = 1.4100
Convective mixing height constant (conste) = 0.1500
Stable mixing height constant (constn) = 2400.0000
Overwater mixing height constant (constw) = 0.1600
Absolute value of Coriolis parameter (fcoriol) = 9.990E+02 (1/s)
Minimum pot. temp. lapse rate in layer above
current mixing height (dptmin) = 0.0010 (deg. K/m)
Depth of layer above mixing height used to
compute lapse rate (dzzi) = 200.0000 (m)
Precip interp. option: 2
Rad. Inf. for Precip (km): 100.0000
Min. Prec. cutoff (mm/hr): 0.0100
-----Convective Mixing Height options-----
Method used to compute mixing height (imixh) 1
1 = Maul-Carson for land and water cells
-1 = Maul-Carson for land cells only; OCD overwater
2 = Batchvarova and Gryning for land and water cells
-2 = Batchvarova and Gryning for land cells only;OCD overwater
Threshold buoyancy fluxes required to sustain convective
mixing height growth (in W/m3):
Overland (THRESHL) = 0.000
Overwater (THRESHW) = 0.050
Overwater lapse rates used in conv. mix.hgt growth: 1
0 : SEA.DAT lapse rates and deltaT (neutral if missing)
1 : progn. lapse rates & SEA.DAT deltaT (neutral if mis.)
2 : progn.lapse rates and progn. deltaT
LU category in progn. datasets (ILUOC3d): 16
-----Overwater surface fluxes-----
Method used to compute overwater fluxes (icoare) 10
0 = original deltaT method (OCD)
10 = COARE with no wave parameterization
11 = COARE with wave option jwave=1 (Oost et al.)
-11 = COARE with wave option jwave=1 and obs. wave prop.
12 = COARE with wave option jwave=2 (Taylor and Yelland)
-11 = COARE with wave option jwave=2 and obs. wave prop.
(internal ipsifcn set to 0 )
(internal isfcmet set to 0 )
Coastal/Shallow water length scale (DSHELF in km) 0.0
COARE warm layer computation (IWARM)(1:on-0:off): 0
COARE cool skin computation (ICOOL)(1:on-0:off): 0
----- Other Mixing Height Parameters-----
Maximum overland mixing height (zimax) = 3000.0000 (m)
Minimum overland mixing height (zimin) = 50.0000 (m)
Minimum computed overwater mixing ht (ziminw) = 50.0000 (m)
Maximum computed overwater mixing ht (zimaxw) = 3000.0000 (m)
Spatial averaging of mixing hts. ? (iavezi) = 1 (0=no, 1=yes)
Max. search radius in mixing ht ave. (mnmdav) = 10 (grid cells)
Half-angle of upwind cone (hafang) = 30.0000 (deg.)
Level of winds used in upwind ave. (ilevzi) = 1
Temperature interpolation type (1=1/R;2=1/R**2)= 1
Radius of influence - temperature interpolation= 500.0 (km)
3-D temperature option- ITPROG = 2
0= Temperature from surface and upper air observations
1= Temperature from surface obs. and prognostic data
2= Temperature from prognostic data only
Spatial averaging of temperature ? (iavet) = 1 (0=no, 1=yes)
Default T gradient below mix. ht. over water = -0.0098 (K/m)
Default T gradient above mix. ht. over water = -0.0045 (K/m)
Beginning land use Ending land use for water interpolation
999 999
Radiation parameters
Turbidity coefficient 1 (ha1) = 990.00 (W/m**2)
Turbidity coefficient 2 (ha2) = -30.00 (W/m**2)
Cloudiness coefficient 1 (hb1) = -0.7500
Cloudiness coefficient 2 (hb2) = 3.4000
Net radiation coefficient 1 (hc1) = 5.3100E-13 (W/m**2/K**6)
Net radiation coefficient 2 (hc2) = 60.00(W/m**2)
Net radiation coefficient 3 (hc3) = 0.1200
----------------------------------------------------------------------------------------------------------------------------------
INPUT FILES
Default Name Unit No. File Name and Path
------------ -------- ------------------
CALMET.INP 15 CALMET.INP
GEO.DAT 8 E:\JOBS\NOO_17045\CALMET_OBS\GEO.DAT
SURF.DAT 10 SURF.DAT
MM51.DAT 20 E:\JOBS\NOO_17045\TAPM_SPLIT\TAPM2MM5OBS\03_MAR16.DAT
----------------------------------------------------------------------------------------------------------------------------------
OUTPUT FILES
Default Name Unit No. File Name and Path
------------ -------- ------------------
CALMET.LST 16 E:\JOBS\NOO_17045\CALMET_OBS\MAR\03_MAR.LST
CALMET.DAT 7 E:\JOBS\NOO_17045\CALMET_OBS\MAR\03_MAR.DAT
GEO.DAT File Header ----------
GEO.DAT 2.1 Header structure with coordinate parameters
2
Produced by MAKEGEO Version: 3.2 Level: 110401
NOO_17045
UTM
56S
WGS-84 02-21-2003
94 94 505.985 7075.885 0.050 0.050
KM
New land use categories entered
No. categories (nlu) = 14
Range of land use categories corresponding to WATER = 50 to 55
New land use categories: 10 20 -20 30 40 51 54 55 60 61 62 70 80 90
Land use categories
Multiply all values by 10 ** -2
94 I 5100 5100 5100 5100 5100 5100 5100 5100 5100 5100 5100 5100 5100 5100 5100 5100 5100 5100 5100 5100
I + + + + + + + + + + + + + + + + + + + +
93 I 5100 5100 5100 5100 5100 5100 5100 5100 5100 5100 5100 5100 5100 5100 5100 5100 5100 1000 1000 1000
I + + + + + + + + + + + + + + + + + + + +
92 I 5100 5100 5100 5100 5100 5100 5100 5100 5100 5100 5100 5100 5100 5100 1000 1000 1000 1000 1000 1000
I + + + + + + + + + + + + + + + + + + + +
91 I 5100 5100 5100 5100 5100 5100 5100 5100 5100 5100 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000
I + + + + + + + + + + + + + + + + + + + +
90 I 5100 5100 5100 5100 5100 5100 5100 5100 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000
I + + + + + + + + + + + + + + + + + + + +
89 I 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 5100 5100
I + + + + + + + + + + + + + + + + + + + +
88 I 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 5100 5100
I + + + + + + + + + + + + + + + + + + + +
87 I 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 5100 5100
I + + + + + + + + + + + + + + + + + + + +
86 I 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 5100 5100
I + + + + + + + + + + + + + + + + + + + +
85 I 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 5100 5100
I + + + + + + + + + + + + + + + + + + + +
84 I 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 5100 5100
I + + + + + + + + + + + + + + + + + + + +
83 I 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 5100 5100
I + + + + + + + + + + + + + + + + + + + +
82 I 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 5100 5100
I + + + + + + + + + + + + + + + + + + + +
81 I 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000
I + + + + + + + + + + + + + + + + + + + +
80 I 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000
I + + + + + + + + + + + + + + + + + + + +
79 I 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000
I + + + + + + + + + + + + + + + + + + + +
78 I 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000
I + + + + + + + + + + + + + + + + + + + +
77 I 3000 3000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000
I + + + + + + + + + + + + + + + + + + + +
76 I 3000 3000 3000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000
I + + + + + + + + + + + + + + + + + + + +
75 I 1000 3000 3000 3000 1000 1000 1000 1000 1000 1000 3000 3000 3000 3000 1000 1000 See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalSearchable page text hides email addresses. Original files are unchanged and may show email addresses.