6_Conditional Certificate of Occupancy

 6. Restrictions on the use or occupation        Restrictions
     of the building
    If the building work uses a performance      The following restrictions apply to the use of occupation of the building:
    solution and or a deem-to-satisfy solution
    within the meaning of Building Code of       Compliance with relevant Development Permits and Statutory
    Australia or the Queensland Development
    Code, restricting the use of occupation of   Approvals.
    the building, state the restriction.
    For example, a limitation on the use of      This is a staged C of O to confirm that the building can continue to be
    finishes with the fire hazard properties
    as defined under the Building Code
                                                 occupied. A redesign of the pump room is to be carried out with works
    of Australia.                                to be completed by 14th Feb 2025.

                                                 A final C of O will not be issued until after the compliance issues raised
                                                 by QFES have been satisfactorily resolved.




7. Performance Solutions                         Performance solution requirements
    If the building work uses an performance
    solution, state the applicable materials,    The following systems and procedures form part of the performance solution:
    systems, methods of building,
    procedures, specifications and other         The building is subject to the following performance solutions:
    relevant requirements.

    This will provide building owners and        1.    Fire Engineering Report by Property Technologies No. 13646 Rev C dated
    occupiers with a concise and practical             6/10/2024.
    explanation of alternative solutions that
    may have some operational implications             a.       Openings in external wall less than 3m from the boundary.
    on the use of the building.
                                                       b.       Extended travel distance to exits and points of choice.
    This will also help ensure the ongoing
    use of the building and any future                 c.       Extended distance between exits.
    modifications do not compromise
    compliance with the performance                    d.       SOU, which does not occupy the whole storey, opens into the fire
    requirements of the applicable
    building code.                                              isolated stair.
                                                       e.       Fire hydrant booster located within 10 m of building without DtS
                                                                protection.
                                                 2.    Section J Report by Property Technologies dated 13 Dec 2022




 8. Building Certifier
                                                 Name of building certifier (in full)                         Licence number
    If the certifier is a company, a contact
    person must be shown.
                                                                     Peter Hofstetter                                         A81116

                                                 Signature                              Date                  Building Approval Reference Number


                                                                                          21-Nov-2024                    QLD2 23234/2




Building Act 1975     • Section 102(2) and 103 • Form 11 • Version 4 • October 2020                                                     Page 2 of 2